OPPLE HB -B 80W-840-N LED Highbay Basic Performer Instruction Manual

July 26, 2024
OPPLE

OPPLE HB -B 80W-840-N LED Highbay Basic Performer

Technical Specifications

  • Product Code: 545001076900 – 545001079200
  • Model: Various models ranging from 80W to 240W
  • Light Source CCT: 4000K and 5700K
  • Weight: Ranges from 1.56kg to 2.76kg
  • H(mm): 77 – 78mm
  • (mm): 228 – 375mm

Product Usage Instructions

Installation

Safety wire installation: Pass the safety wire through the ceiling or fixed hook. Fasten the two ends of the safety wire to both sides of the lamp body with screws. Make sure the safety wire is tightened.

Bracket (Available as accessory): Use a bracket if needed for installation.

Pole (Available as accessory): A pole can be used as an accessory for installation.

Frequently Asked Questions (FAQ)

  • Q: What are the available light source CCT options for this LED Highbay?
    A: The LED Highbay is available in both 4000K and 5700K light source CCT options.

  • Q: How do I ensure proper installation and safety of the LED Highbay?
    A: Follow the safety wire installation instructions provided in the manual and use additional accessories like brackets or poles ifneeded for secure installation.

LED Highbay Basic

Technical Specification

Product Code| Model| CCT| Weight (kg)| H(mm)| Φ(mm)
---|---|---|---|---|---
545001076900| LED HB -B 80W-840-N| 4000K| 1.56| 77| 228
545001077000| LED HB -B 80W-840-W| 4000K| 1.56| 77| 228
545001077100| LED HB -B 80W-857-N| 5700K| 1.56| 77| 228
545001077200| LED HB -B 80W-857-W| 5700K| 1.56| 77| 228
545001077300| LED HB -B 100W-840-N| 4000K| 1.56| 77| 228
545001077400| LED HB -B 100W-840-W| 4000K| 1.56| 77| 228
545001077500| LED HB -B 100W-857-N| 5700K| 1.56| 77| 228
545001077600| LED HB -B 100W-857-W| 5700K| 1.56| 77| 228
545001077700| LED HB -B 120W-840-N| 4000K| 2.05| 78| 291
545001077800| LED HB -B 120W-840-W| 4000K| 2.05| 78| 291
545001077900| LED HB -B 120W-857-N| 5700K| 2.05| 78| 291
545001078000| LED HB -B 120W-857-W| 5700K| 2.05| 78| 291
545001078100| LED HB -B 150W-840-N| 4000K| 2.05| 78| 291
545001078200| LED HB -B 150W-840-W| 4000K| 2.05| 78| 291
545001078300| LED HB -B 150W-857-N| 5700K| 2.05| 78| 291
545001078400| LED HB -B 150W-857-W| 5700K| 2.05| 78| 291
545001078500| LED HB -B 200W-840-N| 4000K| 2.76| 78| 375
545001078600| LED HB -B 200W-840-W| 4000K| 2.76| 78| 375
545001078700| LED HB -B 200W-857-N| 5700K| 2.76| 78| 375
545001078800| LED HB -B 200W-857-W| 5700K| 2.76| 78| 375
545001078900| LED HB -B 240W-840-N| 4000K| 2.76| 78| 375
545001079000| LED HB -B 240W-840-W| 4000K| 2.76| 78| 375
545001079100| LED HB -B 240W-857-N| 5700K| 2.76| 78| 375
545001079200| LED HB -B 240W-857-W| 5700K| 2.76| 78| 375

Light Source

Installation

Safety w ire installation:
Pass the safety wire through the ceiling or fixed hook.
Fasten the two ends of the safety wire to both sides of the lamp body with screws. Make sure the safety wire is tighten.

Warning: always take your responsibility to install the additional safety wire to ensure proper protection of your installation.

Hook

Bracket ( Available as accessory )

Pole ( Available as accessory )

Reflector ( Available as accessory )

Additional IP66 waterproof connection box ( NOT included in packaging, Installation must be performed by a qualified person ) is necessary for power connection to ensure the waterproof performance and safety. The connection box and terminal block in it should conform to IEC 60998-2-1 or IEC 60998-2-2 ( Purchase Separately ). The terminal should be adapted to 0.75-1.5mm² wire.

The product support various applications such as factory, mall, warehouses etc. Not for rough service.
Input Voltage: 220-240V~ 50/60Hz
Caution: Any operation is forbidden while power is on.

To reduce the risk of strangulation the flexible wiring connected to this luminaire shall be effectively fixed to the wall if the wiring is within arm’s reach.

The light source of this luminaire is not replaceable; when the light source reaches it’s end of life the whole luminaire shall he renlaced

The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
For use in environments where normal non-conductive/conductive dust accumulation may be expected, not for use in environments with expected high/unusual dust accumulation.

Data subject to change

Opple Lighting Co.,Ltd.
Room 411, Building 1 No. 6111, Longdong Avenue, Pudong New District, Shanghai City 201201, P. R. China

OPPLE Lighting B.V. Meerenakkerweg 1-07 5652 AR Eindhoven The Netherlands service@opple.com www.opple.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals