OPPLE Lighting 12W-830 LED Linear Light Instruction Manual
- July 25, 2024
- OPPLE LIGHTING
Table of Contents
OPPLE Lighting 12W-830 LED Linear Light
Light Source
Installation Procedure
WARNING
- Switch off before installation.
- Switch on only after complete installation and examination of the circuit.
- Professional electrician for installation and maintenance only.
Surface mounted installation
Wall mounted installation
Safety Instructions
Basic safety precautions should always be followed when installing, including the following:
- Read all instructions.
- Licensed electrician for installation only.
- Always ensure the power is OFF and the fitting has cooled down before performing any maintenance, cleaning, changing the globe, or adjustment to the fitting.
- Do not install any luminaire near the heat source.
- Do not exceed the nominal supply voltage or amperage ratings.
- To avoid injury or damage to the fitting, please ensure that power leads and screws are secure before connecting the power.
Specification
Opple Lighting
B.V. Meerenakkerweg 1-07 5652 AR Eindhoven
The Netherlands
service@opple.com
www.opple.com
Data subject to change:
OPPLE Lighting Co., Ltd.
Room 411, Building 1 No. 6111, Longdong Avenue, Pudong New District, Shanghai
City 201201, P. R. China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>