OPPLE 10W-830 LED Linear Java Instruction Manual

July 26, 2024
OPPLE

OPPLE 10W-830 LED Linear Java Instruction Manual

LED LINEAR LIGHT

| |
---|---|---
521028003000| 3000K/4000K| 0.7Kg

Model Name| L
(mm)| D
(mm)| H
(mm)| Rated
Voltage (V-)| Frequency
(Hz)| Current(A)| Power Factor| Rated
Power(W)
---|---|---|---|---|---|---|---|---
LED Linear-Java L580-10W| 580| 72| 66| 220-240| 50/60| 0.3| 0.9| 10

Pro duct Code| Product Description| N| Light source code| QR Code| Energy Labe l
---|---|---|---|---|---
521028003000| LED Linear-Java L580-10W-830/840-WH| 1| LS118001032| | C

This product contains a light source of energy efficiency class (C).

Safety Instructions

To ensure correct function and safety, please read and follow all instructions carefully before using the product:

  1. Turn off power supply before installation or before doing any maintenance work.
  2. Do not install any luminaire near the heat source. nominal supply voltage or amperage ratings.
  3. Do not exceed the
  4. All wiring and installation of the light fitting must adhere to local and national wiring rules.
  5. Take care not to pull any electrical wires during unpacking as this may damage the connection.
  6. Lay out all the components on a smooth surface and make sure there are no components missing before assembling.
  7. To avoid injury or damage to the fitting, please ensure that power leads and screws are secure before connecting the power.
  8.  Please keep instructions for future reference.
  9. Please refer to IP(Ingress Protection) rating of this luminaire when deciding the location. of installation.
  10. If luminaire is exposed to high corrosive environment(coastal region), it will require a higher durability of powder coat, consult manufacturer before installation.

Installation Procedure

WARNING

Tum Off Power Supply

  1. Switch off before installation.
  2. Switch on only after complete installation and examination of the circuit.
  3. Professional electrician for installation and maintenance only.

Waterproof Installation Tips(If applicable

Waterproof gasket for screwing| | Fasten the waterproof gasket into the mounting screws to prevent water from leaking inside.
---|---|---
Waterproof grommet for cable entry| | If there is gap between cable and waterproof grommet, please fill it with water- resistant silicone caulk to prevent water from leaking inside.
Waterproof cable Gland for mains entry| | Ensure that the waterproof cable gland is tightened to prevent water from leaking inside
Water-resistant silicone caulk in knock out hole| | Caulks in knock out holes are tight enough to avoid dust, insects, and especially water from leaking inside.

Wall mount installation

select preferred colour temperature for product in CCT change function only.

Neutral
Earth
Switched

Wire diameter: 0.5-2.5mm
Wire stripping length: 8-10mm

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals