Gymstick TM-WPAD Walking Pad User Manual

Gymstick TM-WPAD Walking Pad

Product Information

Specifications

• Expansion dimensions: 1432 x 547 x 129 mm / 56.5” x 21.5” x 5”
• Folding dimensions: 822 x 547 x 129 mm / 32.5 x 21.5 x 5
• Walking Area: 1200 x 415 mm / 47 x 16.5
• Gross weight: 31 kg / 68 lbs
• Net weight: 28 kg / 62 lbs
• Maximum load: 100 kg / 220 lbs
• Applicable age: 14 ~ 60 years old
• Applicable height: Unlimited
• Minimum speed: 0.5 km/hr / 0.5 mi/hr
• Maximum speed: 6 km/hr / 3.75 mi/hr
• Power Input: 746 W
• Frequency: 50 / 60 Hz
• Rated voltage: 220 – 240 V ~
• Sport mode: Standby mode / Manual mode / Automatic mode

Product Usage Instructions

Product and Accessories
Please carefully check whether the contents of the package are complete and intact. If there is any missing or damaged, please contact the seller.

Parts:

• Power Cable
• Remote Controller Lanyard
• Wrench
• Silicone Oil
• User Manual

Function Schematic Diagram

Product main body:

• Walking Belt
• Fold Hinge

Introduction of the function of the indicator panel:

• Display Time
• Display Speed
• Display Distance
• Display Steps
• Standby Mode
• Manual Mode
• Automatic Mode
• Fault Warning Light

WalkingPad remote control:

• START/STOP LANYARD
• ACCELERATION
• DECELERATION MODE SWITCH
• BATTERY COVER

Guide for Initial Operation

1. Choose flat ground to place the WalkingPad. It is forbidden to place it on thick and soft cushion. Please note: Don’t connect the power before the WalkingPad is fully unfolded.
2. Unfold the WalkingPad slowly and press it down to completely flat.
3. Check and adjust the walking belt to make sure it’s centered.

FAQ

• Q: Can children use the WalkingPad?
  A: This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities unless they have been given supervision or instruction concerning use by a responsible person.

• Q: What should I do if I experience physical discomfort while using the WalkingPad?
  A: If you feel any chest pains, nausea, dizziness, or shortness of breath, stop exercising immediately and consult your physician before continuing.

SAFETY WARNING

• To reduce the risk of personal injury, read and understand all the instructions before using this product.
• Electric shock hazard, where the appliance is used without the earth connection.
• Never leave the treadmill unattended. Unplug the unit from the power outlet when it is not in use.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• This equipment is for household and office use only. Do not use the equipment outdoors.
• If you feel any chest pains, nausea, dizziness, or short of breath, you should stop exercising immediately and consult your physician before continuing.

Welcome to use
Thank you for choosing the WalkingPad Walking device, hereinafter referred to as a WalkingPad, which possess various advantages including exquisite, foldable, innovative integral design. From now on, enjoy the quality life of walking at home.

Product and Accessories

Please carefully check whether the contents of the package are complete and intact. If there is any missing or damaged, please contact the seller .

Function schematic diagram

1. Product main body
2. lntroduction of the function of the indicator panel
3. Walkingpad remote control

Guide for initial operation

1. Choose flat ground to place the WalkingPad. It is forbidden to place it on thick and soft cushion.
   Please note: Don’t connect the power before the WalkingPad is fully unfolded.

2. Unfold the walkingpad slowly and press it down to completely flat.

3. Check and adjust the walking belt to make sure it’s centered.

4. Connect the power cord and press the button to switch on.

5. Unlock all functions by following ways, otherwise the speed limit remains at 3km/hr.

6. Walk 1KM on device first, then reboot.

7. Complete Novice Guide by WalkingPad APP to unlock all functions. You can also skip novice quide by connecting APP to unlock.

8. Search ”Walkingpad” App from Apple Store or Google Play and complete installation.

9. Open the App, follow the prompts to set up the device.

10. Enter novice guide.

11. Start to use the WalkingPad.

12. If the belt deviates from the orbit in use, please adjust properly.
    SEE: 06 Maintenance and service.

13. Short press: return to the previous mode.
    Long press: switch to Standby mode.

Learn to use WalkingPad

1. Mode instruction

2. Instructions of the standby mode control

3. Instructions of manual mode control (primary mode)
   In this mode, the speed of the WalkingPad can be controlled by the remote control. It is recommended that beginners use the manual mode first and then use the automatic mode after being skilled in using the WalkingPad. The manual mode is controlled by remote control by default, that is, the START/STOP button of the remote control is used to start or stop the WalkingPad, which can be modified in the client “Personalized”.

4. Description of automatic mode control (advance mode) This is a challenging and higher-class mode, User can walk on the Walkingpad completely out of remote controller. We only recommend those who have good sports skills or walking-device experience to take the challenge.
   

5. Remote Controller Notice
   If the remote controller has no response or you change a new one, the remote controller and walking device need to re-establish communication.

   • Remote control pairing method:
     Restart the WalkingPad, press and hold down the mode switch button on the remote control immediately, hearing the sound of “Beep” indicates the success of pairing. Note: During the operation, the remote control should be close to the LED display panel of WalkingPad.

6. Error Warning Light
   Error Warning Light on the display panel is off when Walkingpad works well. When error occurs, Error warning light turns on and shows its error code.

   • E01: Drive communication fault;
   • E02: Motor abnormalities;
   • E05: Overcurrent protection;
   • E06: Motor Protection;
   • E08: Sensor Fault;
   • E10: High temperature protection, automatic recovery after the end of countdown;
   • E11: Overload protection, please add lubricating oil, and resume automatically after countdown.

Safety Notice

Maintenance and Service

1. Clean the walking machine
   • Turn off the machine and unplug the power cord.
   • Add several drops of detergent on cotton rag or towel. Don’t pour the detergent on the belt directly, and don’t use acid or corrosive cleaners.
   • Wipe off dust and stains on the frame, front panel and belt. Do not wipe backside of the belt.
   • After using for a period, dust and stains may appear on the back part, that is normal situation, and just clean them up.
2. Adjust the belt
   • Press and hold both Mode Switch Button and Acceleration Button on the remote control over 3 seconds.
   • Front panel shows “CALI” and the speed is 4 km/hr ( 2.5 mi/hr ).
   • If belt deviates to the left: Turn the left adjusting screw for a half-circle clockwise.
   • If belt deviates to the right: Turn the right adjusting screw for a half-circle clockwise.
   • If belt is slipping: Turn both left and right adjusting screw for a half-circle clockwise at same time.
   • Keep the machine running for 1-2 minutes and check whether it needs to readjust.
3. Lubricate the Belt
   • Turn off the machine and unplug the power cord.
   • Lift up the belt and apply silicone oil on the backside of the belt.
   • Turn on the machine again
   • Keep the machine running under 4 km/hr ( 2.5 mi/hr ) for 10-20 20 seconds.
   • Only apply 5 ml ~ 10 ml lubricant oil each time, too much lubricant oil makes the belt slip.
   • Apply for silicone oil once every 3 months.

Implied Warranty

The importer of this machine assures that this device is manufactured with high-quality materials. The prerequisite for the implied warranty is the proper setup by the operating instructions. Improper use and /or incorrect transportation can void the warranty. The implied warranty is valid for 1 year, beginning from the date of purchase. For eventual defects please contact the dealer of this product within the guarantee period. The warranty applies to the following parts (as far as included in the scope of delivery): Frame, cable, electronic devices and wheels.

The guarantee does not cover:

• Damage affected by outer force
• Intervention by unauthorized parties
• Incorrect handling of the product
• Non-compliance of the operating instructions

Wear parts and expendable parts are also not covered.
The device is only intended for home and office use. The warranty does not apply to commercial use of any kind.
Manufactured for:
Gymstick International Oy
Ratavartijankatu 11
15170 Lahti, FINLAND

Replacement and Disposal
The battery contained in this appliance (1 x CR2032 / 3V) must be removed for or disposal. When replacing the battery, use only original battery, available from our online parts shop. The battery compartment is located on the underside of the appliance. Open the compartment by removing the screw in the cover using a suitable screwdriver, and then press the lower end of the locking catch on the connectors. In that way, both sides of the connection can be separated by pulling them apart. When inserting a new battery, push together the two connectors and ensure that the catch locks over the stop. Never dispose of old battery in domestic garbage, but only through the proper public collection points. This also applies to the battery of defective appliances.

Devices marked with this symbol must be disposed of separately from your household waste, as they contain valuable materials which can be recycled. Proper disposal protects the environment and human health. Your local authority or retailer can provide information on the matter.

Manufactured for:
Gymstick International Oy
Ratavartijankatu 11, 15170 Lahti, Finland

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>