PARKSIDE PFRB 26 A1 Surface Cleaning Brush Instruction Manual
- August 14, 2024
- PARKSIDE
Table of Contents
PARKSIDE PFRB 26 A1 Surface Cleaning Brush
Specifications:
- Product Name: Surface Cleaning Brush PFRB 26 A1
- Model Number: IAN 440089_2304
Product Information
The Surface Cleaning Brush PFRB 26 A1 is a high-quality product that has been quality-tested and inspected during production to ensure proper functioning. The product comes with a surface cleaner broom, brush head, extensions, adapter, and an instruction manual.
Product Usage Instructions
Assembly:
- Connect the two extensions to the surface cleaner broom by inserting, pressing, and turning to lock them in place.
- Tighten the two coupling nuts to secure the connections.
Operation:
- Connect the surface cleaner broom to a pressure washer via the high-pressure connection by inserting, pressing, and turning to lock it in place.
- Tighten the coupling nut to fix the connection.
Adjusting the Surface Cleaner Broom:
Use the valve to open or close the side nozzle for spraying or non-spraying
functions.
Cleaning/Maintenance:
Regularly clean the product to ensure long and reliable use.
Connecting the Pressure Washer Attachment:
- If using without an adapter, connect the accessory to your Parkside pressure washer via the high-pressure connection by inserting, pressing, and turning to lock it in place.
- Secure the connection by tightening the coupling nut.
FAQ:
- Q: How do I adjust the side nozzle spray on the surface cleaner broom?
A: Use the valve on the surface cleaner broom to open or close the side nozzle for spraying or non-spraying functions.
PDF ONLINE
www.lidl-service.com
Before reading, unfold the page containing the illustrations and familiarise
yourself with all functions of the device.
Introduction
Congratulations on purchasing your new product. You have chosen a high-quality
product.
This product was quality-tested and subjected to a final inspection during
production, therefore ensuring proper functioning of your device.
The instruction manual forms part of this product. It contains important
information on safety, use and disposal. Before using the product, you should
familiarise yourself with all operating and safety instructions. Use the
product only as described and for the stated fields of application. Store the
manual carefully and ensure that all documents are handed over in the event
that the product is passed on to an-other user.
Proper use
The surface cleaner broom is suitable for effective and powerful cleaning of
stairs, terraces, garages, walls, balconies, walk-ways or driveways.
This product is not suitable for commercial use. The manufacturer is not
liable for damage caused by improper use or incorrect operation.
The pressure washer attachment is suitable for Parkside pressure washers of
the series PHD 110, PHDS 110 Silent, PHD 135, PHD 150, PHD 170, PHDM 110 Mini,
PHDP 180.
Including adapter for other common pressure washers with a working/rating
pressure of max. 150 bar, e.g. from Kärcher.
General description
The illustrations can be found on the front fold-out page.
Scope of delivery/accessories
Unpack the product and check for completeness:
Dispose of the packaging material properly.
- Surface cleaner broom:
- 1 x brush head
- 2 x extension
- 1x adapter
- Instruction manual
Overview
- Adapter
- Coupling nut
- Extension
- Surface cleaner broom
- Rubber lip
- Valve
- Side nozzle
Description of functions
Please refer to the descriptions below for information on how the operating
elements work.
Technical data
Surface cleaner broom . PFRB 26 A1
Maximum working/rated pressure
- (P max) …………………. 15 MPa / 150 bar
Permissible pressure
- (P max) …………………. 18 MPa / 180 bar
- Flow rate (Q max) …………………..450 l/h
- Inlet temperature (T max) ……………..60 °C
Adapter
Suitable for pressure washers with the following performance data:
Maximum working/rated pressure
- (P max) …………………. 15 MPa / 150 bar
Permissible pressure
- (P max) …………………. 18 MPa / 180 bar
- Flow rate (Q max) …………………..450 l/h
- Inlet temperature (T max) ……………..60 °C
Safety information
-
Pay attention to the sensitivity of the surface when choosing the pressure washer accessory.
-
To prevent damage, please also note the manufacturer’s instructions for the object being cleaned.
-
Pay attention at all times.
Pay attention to what you are doing and go about your work with common sense. -
Avoid abnormal body postures. Ensure secure footing and keep your balance at all times.
-
Keep your work area tidy.
An untidy workplace can lead to accidents. -
Wear suitable work clothing.
- When working outdoors, non-slip footwear is recommended.
- Wear a hair net to contain long hair.
-
Consider environment influences. Make sure the workplace is well lit.
-
Use only original accessories and do not carry out any modifications.
Assembly
- Connect the two extensions (3) to the surface cleaner broom (4) by inserting, pressing and turning (bayonet lock).
- Fix the connections by tightening the two coupling nuts (2).
Operation
Connecting the pressure washer attachment
Connecting without adapter
- Connect the accessory to your Parkside pressure washer via the high-pressure connection by inserting, pressing and turning (bayonet lock).
- the connection by tightening the coupling nut (2).
Connecting with adapter
- Connect the adapter (1) to the accessory by inserting, pressing and turning (bayonet catch).
- Fix the connection by tightening the coupling nut (2).
- Connect the adapter (1) to your Parkside pressure washer via the high-pressure connection by inserting, pressing and turning (bayonet lock).
- Fix the connection by tightening the coupling nut (2).
Disconnecting:
Disconnection is done in reverse order.
Adjusting the surface cleaner broom
Use the valve (6) to open the side nozzle.
I Valve open, side nozzle (7) sprays
0 Valve closed, side nozzle does not spray
Cleaning/maintenance
Perform the following cleaning work regularly. This will guarantee long and reliable use.
General cleaning work
Do not use any abrasive cleaning agents or solvents. These could damage the
plastics irreparably.
- Clean the pressure washer attachment with a damp cloth as needed.
Maintenance
The pressure washer attachment is maintenance free.
The rubber lip (5) of the surface cleaner broom can be replaced. Pull the
rubber lip (5) upwards and replace it with a new one.
Storage
- Always store the product:
- dry.
- clean.
- out of the reach of children.
Disposal/environmental protection
The product and packaging should be properly recycled.
Take the product to a recycling plant.
The plastic and metal parts used on your device can be properly sorted
according to materials and grades and efficiently recycled. Please contact our
service centre for more information.
We will dispose of any defective devices that you send to us free of charge.
Spare parts/Accessories
Spare parts and accessories can be obtained at
www.grizzlytools.shop
If you have issues ordering, please use the contact form.
If you have any other questions, contact the ”Service-Center” (see page 7).
Service-Center
Service Great Britain
Tel.: 0800 404 7657
E-Mail: grizzly@lidl.co.uk
IAN 440089_2304
Importer
Please note that the following address is not a service address. Please
initially contact the service centre specified above.
Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
DE-63762 Großostheim
GERMANY
www.grizzlytools.de
Imported for GB market by:
Lidl Great Britain Ltd.
Lidl House, 14 Kingston Road
Surbiton, KT5 9NU
Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
63762 Großostheim, GERMANY
Imported for GB market by: Lidl Great Britain Ltd, Lidl House, 14
Kingston Road Surbiton, KT5 9NU
Last Information Update : 09/2023 Ident.-No.: 30310091092023-GB/BE/NL
FSC
www.fsc.org
MIX
Paper from responsible sources
FSC® C142184
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>