VOLLRATH 36651-FF Hot Well Drop in Instruction Manual
- August 13, 2024
- VOLLRATH
Table of Contents
VOLLRATH 36651-FF Hot Well Drop in
Specifications
- Product Name: Vollrath Hot Well Drop-ins
- Model Number: 17676-1 ml
- Release Date: 2/3/17
Product Information
This Vollrath equipment is designed to hold containers of food at proper serving temperatures. It is not meant for cooking raw food or reheating prepared food. Ensure food is prepared and placed in the drop-in at the correct serving temperatures.
Features and Controls
This drop-in includes the following features and controls:
- Temperature Control: Used to set or adjust the temperature of the well. The 0 position is off.
- Power Indicator Light: Illuminates when the well is in heating mode.
- Thumbscrew: Secures the drop-in to the mounting surface.
- Drain Valve: Used to empty water from the well(s).
Operation Instructions
- Check that the drain valve(s) are closed to prevent water drainage.
- Plug the electrical power cord into an outlet matching the rated voltage on the nameplate.
- Preheat the water in the wells by covering them with empty food containers or covers. Set the temperature control to maximum heat and preheat for 60 minutes.
- Adjust the heat setting to maintain a safe holding temperature for food quality.
FAQ:
Q: Can I use this drop-in to cook raw food?
A: No, this drop-in is designed only to hold food at serving temperatures, not
for cooking raw food.
Q: How do I clean the drop-in?
A: Refer to the cleaning instructions provided in the user manual. Typically,
wipe down the surfaces with a damp cloth after unplugging the unit.
Operator’s Manual
Hot Well Drop-ins
Thank you for purchasing this Vollrath equipment. Before operating the equipment, read and familiarize yourself with the following operating and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Save the original box and packaging. Use this packaging to ship the equipment if repairs are needed.
SAFETY PRECAUTIONS
To ensure safe operation, read the following statements and understand their meaning. This manual contains safety precautions which are explained below. Please read carefully.
WARNING
Warning is used to indicate the presence of a hazard that will or can cause
severe personal injury or death.
CAUTION
Caution is used to indicate the presence of a hazard that will or can cause
minor or major personal injury if the caution is ignored.
NOTICE: Notice is used to note information that is important but not hazard-
related.
To reduce risk of injury or damage to the equipment
- This equipment must be installed by a qualified person.
- Use only grounded electrical outlets that match the rated voltage on the nameplate.
- NOTICE: Do NOT modify the cord or plug on the drop-in. Modifying any component may damage the drop-in or cause injury, and will void the warranty. See the specification sheet on Vollrath.com for electrical specifications.
- Do not use an extension cord with this equipment. Do not plug this equipment into a power strip or multi-outlet power cord.
- This equipment should only be used in a flat, level position.
- Do not spray the controls or the outside of equipment with liquids or cleaning agents.
- Keep the equipment and power cord away from open flames, electric burners or excessive heat.
- Do not use food pans deeper than 6″ (15.2 cm).
- Do not operate equipment if it is damaged or malfunctioning.
- Do not operate unattended.
- Unplug and allow the equipment to cool before cleaning or moving.
- Handle hot water carefully.
- Do not clean this equipment with steel wool.
FUNCTION AND PURPOSE
This drop-in is intended and designed to hold containers of food at proper serving temperatures. Hot food stations are not intended or designed to cook raw food or to reheat prepared food. Food must be prepared and placed in food stations at proper serving temperatures. This equipment is not intended for household, industrial or laboratory use.
FEATURES AND CONTROLS
- A TEMPERATURE CONTROL. Used to set or adjust the temperature of the well. The larger the number the higher the temperature, the smaller the number the lower the temperature. The “0” position is off.
- B POWER INDICATOR LIGHT. Illuminates when the well is in the heating mode.
- C THUMBSCREW. Secures the drop-in to the mounting surface. D DRAIN VALVE (not shown). Used to empty water from the well(s).
OPERATION
WARNING
Electrical Shock Hazard
Keep water and other liquids from entering the inside of the unit. Liquid
inside the unit could cause an electrical shock.
Do not over fill pans or trays. Liquid could contact the electrical components
and cause a short circuit or an electrical shock.
CAUTION
Burn Hazard
Do not touch hot food, liquid or heating surfaces while equipment is heating
or operating.
NOTICE: Drop-in meets NSF4 performance standards only when using moist heat.
Operation with water is required for even heating of the food product.
NOTICE: Do not use food pans deeper than 6″ (15.2 cm).
-
Check the drain valve(s) to verify it is in the closed position to prevent water from draining out.
-
Fill each well with ³⁄₈” (1 cm) of clean hot water. Do not over fill.
-
Plug electrical power cord into a outlet that matches the rated voltage on the nameplate.
-
Preheat the water in the wells by covering wells with empty food containers or covers. Turn the temperature control to the maximum heat setting. Preheat for 60 minutes.
-
Place containers of hot food, above 140 °F (60 °C), into preheated equipment.
-
Reduce heat setting to a level that will maintain a safe holding temperature and maintain food quality.
NOTICE: Monitor food temperature closely for food safety. The United States Public Health Service recommends that hot food be held at a minimum of 140 ºF (60 ºC) to help prevent bacteria growth. Maintain correct water level and temperature setting. Periodically remove food container and check the water level. Add water in needed. -
Maintain water level during operation. Periodically (approximately every 2 hours) remove the containers of food and check the water level. Add hot water if needed.
-
Use gloves, mitts or pot holders to protect hands when removing hot food containers.
CLEANING
CAUTION
Burn Hazard
Hot surfaces and food can burn skin. Allow the hot surfaces to cool before
handling.
To maintain the appearance and increase the service life, clean your equipment
daily.
NOTICE: Do not use caustic cleaning chemicals, steel wool or commercial lime
removal products to clean the equipment. Thoroughly rinse equipment with water
after cleaning.
- Turn the heat control to the “0” setting or turn the power switch (some models) to the OFF position.
- Unplug the drop-in.
- Use gloves, mitts or pot holders to protect hands when removing hot food containers.
- Rotate the drain valve(s) to the open position. Drain the water.
- Use a damp cloth or sponge dipped in soapy water to clean the inside of the well and the outside of the equipment.
- Thoroughly rinse equipment with water after cleaning.
- Rotate the valve to the closed position,
TROUBLESHOOTING
Problem| Might be Caused By| Course of
Action
---|---|---
Unit does not get to correct temperature or to a high temperature| Low or
incorrect voltage to unit.| Verify that voltage rating in unit matches the
source voltage. If not have qualified electrical personal install proper
source voltage.
No water or incorrect water level.| Add water to correct level.
ITEM NUMBERS
Bain Marie
**3646611HD
3640060|
3640460|
3640460HD| 3647450HD|
3647560HD| Short -Sided|
3664830HD
---|---|---|---|---|---|---
Two ****Pan
**3646711HD
3640080|
3640410|
3640480HD| 3647470HD|
3647580HD| Two Well|
3664930HD
36500
36466HD
3647260|
3640470|
3640560HD| 3640761HD| Six Well|
36646|
36642HD
36501240|
36467HD|
3639901|
36405|
3647360HD| 3640660HD| 3640911| 3664630
---|---|---|---|---|---|---|---
Bain Marie|
3646710HD| 3639911HD| 3640550|
3647380HD| 3640680HD| 36409| 36647
Three Pan| 36471HD| 3640001HD| 3640560| Four Well|
3640760HD| 3640910| 3664720
36502|
3647110HD| 3640011HD| 3640510| 36406| 3640780HD| 36476| 3664730
36503208|
3646661HD| 36399HD| 3640570| 3640650| 3647460HD| 3647610| 36640
36503240|
3646681HD| 3639910HD| 3640580| 3640660|
3647480HD| 3640951| 3664020
Bain Marie|
3646761HD| 36400HD| 3640501| 3640610| Five Well|
3640971|
3664030
Four Pan| 3646781HD|
3640010HD| 3640551| 3640670| 36408| 3640950| 36641
36504208|
3646660HD| 36472HD| 3640561| 3640680| 3640850| 3640970| 3664120
36504240|
3646680HD| 3647210HD| 3640511| 36407| 3640860| 3647650| 3664130
Bain Marie|
3646760HD| 3639951HD| 3640571| 3640750| 3640810| 3647670| 36646HD
One Well
3646601
3646661
3646611
3646681
36466
3646660
3646610
3646680
36467
3646760
3646710
3646780
3646701
3646761
3646711
3646781
36471
3647160
3647110
3647180
3646601HD
3646611HD
SERVICE AND REPAIR
Serviceable parts are available on Vollrath.com
To avoid serious injury or damage, never attempt to repair the unit or replace
a damaged power cord yourself. Do not send units directly to The Vollrath
Company LLC. Please contact Vollrath Technical Services for instructions.
When contacting Vollrath Technical Services, please be ready with the item
number, model number (if applicable), serial number, and proof of purchase
showing the date the unit was purchased.
WARRANTY STATEMENT FOR THE VOLLRATH CO. L.L.C.
This warranty does not apply to products purchased for personal, family or
household use, and The Vollrath Company LLC does not offer a written warranty
to purchasers for such uses.
The Vollrath Company LLC warrants the products it manufactures or distributes
against defects in materials and workmanship as specifically described in our
full warranty statement. In all cases, the warranty runs from the date of the
end user’s original purchase date found on the receipt.
Any damages from improper use, abuse, modification or damage resulting from
improper packaging during return shipment for warranty repair will not be
covered under warranty.
For complete warranty information, product registration and new product
announcement, visit www.vollrath.com
The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201 U.S.A. Main Tel: 800.624.2051 or 920.457.4851 Main
Fax: 800.752.5620 or 920.459.6573 Customer Service: 800.628.0830 Canada
Customer Service: 800.695.8560
Technical Services
techservicereps@vollrathco.com
Induction Products: 800.825.6036 Countertop Warming Products: 800.354.1970 All
Other Products: 800.628.0832
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>