VOLLRATH 71001 Cayenne Full Size Heater Instructions
- August 17, 2024
- VOLLRATH
Table of Contents
VOLLRATH 71001 Cayenne Full Size Heater
Product Specifications
- Model: 71001
- Voltage: 120 VAC
- Power: 700 W
Installation
- Ensure the power source matches the voltage requirement of 120 VAC.
- Connect the thermostat control (1) to the power source.
- Connect the heating element (2) to the appropriate terminals.
- Install the upper limit switch (3) and water level sensor switch (4) as per the provided instructions.
- Connect the low water warning light (5) to the power supply.
Operation
- Set the desired temperature on the thermostat control (1).
- The heating element (2) will start heating up the water.
- The upper limit switch (3) ensures the water temperature stays within a safe range.
- The water level sensor switch (4) helps in monitoring the water level.
- The low water warning light (5) will indicate if the water level is too low.
Frequently Asked Questions
Q: What should I do if the low water warning light is always on?
A: Check the water level and ensure it is above the minimum required level.
Refill if necessary.
Q: How do I adjust the temperature on the thermostat control?
A: Turn the temperature dial on the thermostat control to your desired
setting.
Q: Can I use this product with a different voltage?
A: No, this product is specifically designed for use with 120 VAC only.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>