Hanwha Vision SBP-400WMW Wall and Pole Mount Installation Guide

August 14, 2024
Hanwha Vision

Wall &Pole Mount
SBP-400WMW

Package

Optional Accessory

Installation Precautions

  • Make sure that the installation place can endure at least 4 times of the total weight of the Wall&Pole Mount and Camera.
  • Each anchor screw must be capable of withstanding an extraction force of 700 kg.
  • When using PoE injector at internal space, we do not recommend to use booted mold type RJ45 connector for cabling.
  • During installation procedure, safety wire can be used between the site and side hook on the mount to sustain.

Mounting Hole Guide

Installation

When using conduit (3/4″)

When using PoE Injector

  • The SPO-6011 injector installation is the same as in SPO-8315 except for the ground connection.
  • We do not recommend to connect SFP cabling when using SPO-8315 and SPO-6011.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Hanwha Vision User Manuals

Related Manuals