VOLLRATH 3511015-1 Potato Cutter Potato Wedger Installation Guide

Installation Instructions

POTATO CUTTER/WEDGER BLADE REPLACEMENT

WARNING
Sharp Blade Hazard
Blades are sharp and can cause cuts. To avoid injury from sharp blades, handle with caution.

1. Inspect the new blade assembly to verify it matches the pusher head. If it does not, install the correct pusher head.
2. Wash the new blade assembly with warm, soapy water and rinse thoroughly to remove the thin protective oil film.
3. Remove nuts and carefully remove the old blade assembly. Save the nuts.
4. Set the new blade assembly in place and secure it with the nuts.
5. Check the blade alignment by slowly setting the pusher head onto the blade assembly. They should slide together with no obstructions.
6. Lubricate the guide rods with mineral oil, Petrol-Gel® or other food- grade lubricant.
   NOTICE: Do not use cooking oil as it will become sticky and may permanently damage the equipment.

The Vollrath Company, L.L.C. Headquarters 1236 North 18th Street
Sheboygan, Wisconsin
53081-3201 USA
Main Tel: 800-624-2051 or 920-457-4851
Main Fax: 800-752-5620 or 920-459-6573
Canada Customer Service: 800-695-8560
Tech Services: techservicereps@vollrathco.com
www.vollrath.com
Pujadas
Ctra. de Castanyet,
132 P.O. Box 121
17430 Santa Coloma de Farners
(Girona) – Spain
Tel. +34 972 84 32 01
info@pujadas.es
Vollrath of China
Vollrath Shanghai Trading Limited
23A, Time Square Plaza | 500
Zhang Yang Road
Pudong, Shanghai 200122
Tel: 86-21-50589580
Vollrath de Mexico S. de R.L. de C.V.
Periferico Sur No. 7980 Edificio 4-E
Col. Santa Maria Tequepexpan
45600Tlaquepaque, Jalisco |
Mexico
Tel: (52) 333-133-6767
Tel: (52) 333-133-6769
Fax: (52) 333-133-6768

© 2017 The Vollrath Company L.L.C.
Part No. 351015-1 ml 11/24/17

References

• Commercial Foodservice & Kitchen Equipment | Vollrath Foodservice

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>