VOLLRATH 350561-1 ml Contemporary Breath Guards Installation Guide

August 14, 2024
VOLLRATH

Outperform Everyday™
Installation Guide

Installation Instructions

Contemporary Breath Guards
This document covers the installation of all Vollrath Contemporary Breath Guards. Your breath guard may look different than the one in the illustrations below, but the installation steps are same for all Contemporary Breath Guards.

BEFORE YOU BEGIN

  1. Download the specification sheet from Vollrath.com. You will need to refer to this document for dimensions and NSF requirements.
  2. Know the countertop manufacturer’s requirements for preparing and installing equipment into the countertop prior to starting installation.

Tools You Will Need:

  • Allan wrench (included with breath guard)
  • Drill
  • 35 drill bit

  • Phillips head screw driver

ASSEMBLE THE BREATH GUARD

  1. Insert the long side(s) into stand-offs on the posts.
  2. Use the included allan wrench to tighten the set screws just enough to hold the panel in place.
  3. If applicable, insert the top panel and tighten the set screws just enough to hold the panel in place.
  4. Tighten all the set screws to hold the panels firmly in place.

INSTALL NSF END PANELS (IF APPLICABLE)

If your breath guard includes NSF end panels, follow the instructions below.

  1. Insert the spacer, shoulder and screw. Slightly tighten the screw to hold it into place.
  2. Slide the NSF end panel into place by aligning the notches in the panel with the mounting screws.
  3. Slightly tighten the screws to hold the panel into place.
  4. Repeat the steps for the other end panel. Tighten all the screws to hold the panels firmly in place.

MOUNT THE BREATH GUARD

  1. Position the assembled breath guard onto the countertop.
  2. Mark the mounting holes.
  3. Slide the breath guard to the side. Drill the holes.
  4. Screw the mounting plates to the countertop.

www.vollrath.com
The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan,WI 53081-3201 U.S.A.
Main Tel: 800.624.2051 or 920.457.4851
Main Fax: 800.752.5620 or 920.459.6573
Customer Service: 800.628.0830
Canada Customer Service: 800.695.8560
Technical Services
techservicereps@vollrathco.com
Induction Products: 800.825.6036
Countertop Warming Products: 800.354.1970
All Other Products: 800.628.0832
© 2016 The Vollrath Company L.L.C.
Part No. 350561-1 ml 11/8/16

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

VOLLRATH User Manuals

Related Manuals