SIGMA 14224WH Outlet Box Cover Instruction Manual
- August 11, 2024
- SIGMA
Table of Contents
SIGMA 14224WH Outlet Box Cover
Product Specifications
- Model: 14224WH
- Product: Outlet Box Cover
- Color: White
- Includes: Gasket and screws
- Opening Diameter: 36.2 mm
- Manufacturer: Sigma Engineered Solutions
- Manufactured in : India
- Listing: LR57925 OUTLET BOX COVER 35D8
Product Usage Instructions
Installation:
- Ensure the area where the outlet box cover will be installed is clean and dry.
- Position the cover over the outlet box, aligning the openings.
- Secure the cover in place using the provided screws.
- Ensure the gasket is properly seated to provide a weatherproof seal.
Maintenance:
Regularly inspect the outlet box cover for any signs of damage or wear.
Replace if necessary to maintain proper protection.
Cleaning:
Use a damp cloth with mild soap to clean the outlet box cover. Avoid using
harsh chemicals that may damage the product.
Storage:
Store the outlet box cover in a dry place away from direct sunlight when
not in use to prolong its lifespan.
Frequently Asked Questions (FAQ)
-
Is this outlet box cover suitable for outdoor use?
Yes, the outlet box cover comes with a gasket and is designed to provide weatherproof protection, making it suitable for outdoor use. -
How can I determine if this cover will fit my outlet box?
The opening diameter of 36.2 mm is a standard size, but it’s recommended to measure your outlet box before purchasing to ensure proper fit.
PRODUCT OVERVIEW
BOX CONTENT
- Includes gasket and screws.
- Items that are shaded are included in this package.
- 36.2 mm opening diameter
WARNING:
Cancer and Reproductive Harm www.P65Warnings.ca.gov.
TURN OFF POWER BEFORE INSTALLING
Warning: Improper wiring of any electrical device can cause serious
injury or death. These wiring devices should only be installed by a certified
electrician or other qualified person.
Caution: This product should be installed in accordance with the National
Electrical Code and all applicable local codes and standards.
- Wire device according to manufacturer’s instructions.
- Mount device to outlet box according to manufacturer’s instructions.
- Close any holes in outlet box according to manufacturer’s instructions.
- Remove tear-outs from gasket as required to fit appropriate device.
- Using provided screws, mount gasket and cover to outlet box with hinges at top.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>