HANECO PARXG2 batten products Installation Guide
- August 10, 2024
- HANECO
Table of Contents
HANECO PARXG2 batten products
Specifications
- Model: PARX75W-AS-4K, PARX150W-AS-4K, PARX200W-AS-4K, PARX300W-AS-4K
- Max Lumen Power:
- PARX75W-AS-4K: 12103lm (Min. 50W, Max. 75W)
- PARX150W-AS-4K: 24504lm (Min. 100W, Max. 150W)
- PARX200W-AS-4K: 34372lm (Min. 175W, Max. 200W)
- PARX300W-AS-4K: 49456lm (Min. 225W, Max. 300W)
- Input Voltage: 220-240Vac, 50/60Hz
- IP Rating: IP65
- CCT: 4000 K
Product Usage Instructions
Installation
- Read the manual carefully before installation.
- Ensure the input voltage is within the specified range.
- Follow the wiring diagram provided for proper connection.
Power Adjustment
The product features an adjustable switch for power. Follow the
instructions below:
- Connect DIM+ (violet) to +12V (black) and DIM- (pink).
- Adjust the switch as needed for the desired power output.
Sensor and Light Control
The product includes a sensor and light control switch. Here’s how to
utilize it:
- Connect DIM+ (violet) to +12V (black) and DIM- (pink) for sensor operation.
- Use the light control switch for manual adjustments.
FAQ
-
What is the recommended input voltage for the product?
The recommended input voltage is 220-240Vac at a frequency of 50/60Hz. -
How do I adjust the power output of the PARX G2 batten?
To adjust the power output, connect DIM+ (violet) to +12V (black) and DIM- (pink) following the provided instructions in the manual.
HANECO LIGHTING LED INSTALLATION GUIDE
PARXG2
- Thanks for choosing our PARXG2 batten products.
- We strongly recommend that you read this manual carefully before installation.
| Model | Max- Lumen | Power | Operating Temp. | Input Voltage | IP Rating | CCT |
|---|---|---|---|---|---|---|
| PARX75W-AS-4K | 12103lm | Min. 50W, Max. 75W | Ta -35°C ~ 50°C | 220-240Vac, | ||
| 50/60Hz | IP65 | 4000 K | ||||
| PARX150W-AS-4K | 24504lm | Min. 100W, Max. 150W | ||||
| PARX200W-AS-4K | 34372lm | Min. 175W, Max. 200W | ||||
| PARX300W-AS-4K | 49456lm | Min. 225W, Max. 300W |
WARNING
- The luminaire must be installed by a licensed/qualified electrician in accordance with local wiring and relevant Australia standard.
- Ensure to disconnect mains supply before conducting any installation and maintenance the luminaire.
- Ensure input voltage conforms to the voltage range of product.
- Ensure all the wiring is correct and secured before connecting mains supply to the luminaire.
- Warranty is void if product is not installed according to the instructions.
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
Note: Product technical information and specification may change over time without prior notice. For latest information, please contact our customer service or visit our website www.haneco.com.au
INSTALLATION
Note : Do not extend low voltage cables from the output power supply, All components must not be mechanically stressed.
Product Code:
- PARX75W-AS-4K
- PARX150W-AS-4K
- PARX200W-AS-4K
- PARX300W-AS-4K
Power adjustable
Wiring Diagram
Available models
For more information www.haneco.com.au
1300 001 LED
Last updated 07/03/24
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>