comsol CMMP07 USB-C Multi-Port Adapter User Manual
- June 5, 2024
- comsol
Table of Contents
CMMP07 USB-C Multi-Port Adapter
User Manual
Model: CMMP07
USB-C Multi-Port Adapter for MacBook, MacBook Air
MacBook Pro, Windows Laptop, or Chromebook
User Manual v1.1
USB-C to 4K HDMI, 2 x USB 3.0, RJ45 Gigabit LAN & USB-C adapter
Connect the latest MacBook, MacBook Air, MacBook Pro, Windows computer or
Chromebook equipped with a USB-C port to an HDMI display, 2 x USB devices,
RJ45 Gigabit LAN & 100W USB-C power pass-through
- 1 x USB-C male connector to connect to a computer
- 1 x HDMI female connector, supports 4K Ultra HD 2160p (3840 x 2160) @30Hz
- 2 x USB 3.0 Type-A female connectors, supports data transfer up to 5Gbps
- 1 x RJ45 female connector for Gigabit LAN
- 1 x USB-C female connector, supports 100W (20V 5A) power pass-through
- Supports mirror or extend mode
- Dimensions: 113 x 43 x 15mm
- Weight: 55g
Operation
It is recommended to always use the USB-C multi-port adapter with your
computer’s power adapter connected to the USB-C PD charging port. This will
provide power to the multi-port adapter while also providing power to charge
your computer.
Connect the USB-C multi-port adapter to your computer by plugging the USB-C
male connector into a USB-C port on your computer.
Connect your computer’s power adapter to the USB-C PD charging port. Supports
up to 100W (20V 5A) power pass through.
Connect a monitor, TV, or projector to the HDMI port.
Connect USB devices to the two USB 3.0 ports. Supported devices include
keyboards, mice, USB flash drives, portable HDDs, USB speakers or printers.
The maximum data transfer rate is 5Gbps.
You can also use the two USB 3.0 ports to charge your phone or other USB
devices. The maximum power output of each port is 5V 900mA. When both ports
are used the maximum power output is 5V 1.5A. To charge a phone or a large
external HDD that consumes a large amount of power, the computer’s power
adapter must be connected to the USB-C PD charging port.
Connect an RJ45 network cable to the RJ45 Gigabit LAN port. This will connect
your computer to a wired network. The green LED indicates the connection to a
network. The yellow LED indicates network activity.
Trouble Shooting
If you are using the USB-C multi-port adapter to charge your phone or connect
a large external HDD or other USB devices that consume a large amount of
power, you must connect your computer’s power adapter.
If you are experiencing these connection problems, unplug and replug the USB-C
multi-port adapter.
If your computer’s power adapter is disconnected, all device connections will
be lost for a few seconds before reconnecting. During this time, data can be
lost. Do not disconnect the power while transferring data to avoid data loss
or corruption.
During operation, the USB-C multi-port adapter may become hot. This is normal
and should not be cause for concern. To minimize heat, please use the adapter
on a desk or table in a well-ventilated area. Avoid using soft pillows or
blankets to avoid blocking the ventilation.
For a stable connection, do not connect multiple devices that consume large
amounts of power. The adapter will only support one external HDD and charge
only one phone.
MacBook is a trademark of Apple Inc., registered in the U.S. and other
countries.
USB-C is a trademark of the USB Implementers Forum.
www.mycomsol.com.au
Made in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>