nVent CADDY 12P12P Armour EMT Conduit Spacer Owner’s Manual
- August 13, 2024
- nVent Caddy
Table of Contents
PUSH IN CONDUIT TO CONDUIT CLAMP, 3/4″ EMT1, 3/4″ EMT2, 1/2″ RIGID1,
1/2″ RIGID2, 0.866″–1.18″ OD1, 0.866″–1.18″ OD2
CATALOG NUMBER
12P12P
FEATURES
Ideal as spacer between same or different size conduit
No tools required for installation
Top conduit to be used for support only, not a raceway
PRODUCT ATTRIBUTES
Material: Spring Steel
Finish: nVent CADDY Armour
EMT Conduit Size 1: 3/4″
EMT Conduit Size 2: 3/4″
Rigid Conduit Size 1: 1/2″
Rigid Conduit Size 2: 1/2″
Outer Diameter 1 (OD1): 0.870″ – 1.18″
Outer Diameter 2 (OD2): 0.870″ – 1.18″
Ultimate Static Load (F): 25lb
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials.
Instruction sheets are available at www.nvent.com and
from your nVent customer service representative. Improper installation,
misuse, misapplication or other failure to completely follow nVent’s
instructions and warnings may cause product malfunction, property damage,
serious bodily injury and death and/or void your warranty.
North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support
Europe
Netherlands: +31 800-0200135
France: +33 800 901 793
Europe
Germany: 800 1890272
Other Countries: +31 13 5835404
APAC
Shanghai: + 86 21 2412 1618/19
Sydney: +61 2 9751 8500
nVent.com
Our powerful portfolio of brands: CADDY ERICO HOFFMAN RAYCHEM SCHROFF
© 2024 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>