SIGMA 143854-75BR Five Hole 3/4 in Outlet Box Bronze Instructions
- August 10, 2024
- SIGMA
Table of Contents
SIGMA 143854-75BR Five Hole 3/4 in Outlet Box Bronze
Product Specifications
- Model Number: 143854-75BR
- Product Name: Outlet Box – Bronze
- Includes: Plugs, ground screw, screws
- Package Contents: Items shaded in the manual
- Manufacturer: Sigma Engineered Solutions
- Location: Made in India
- Certification: Listed LR57925 Outlet Box
Product Usage Instructions
Unboxing and Inspection
Open the package and check if all the components, including plugs, ground
screw, and screws, are present as per the manual.
Installation Steps
- Choose an appropriate location for the outlet box.
- Secure the box using the included screws and ensure it is properly grounded using the ground screw.
- Insert the plugs into the outlets of the box.
- Attach the cover securely over the box to protect the contents.
Safety Precautions
Before installation, ensure that the power source is turned off to prevent
electrical hazards. Follow all local electrical codes and regulations during
installation.
Frequently Asked Questions (FAQ)
-
Q: What should I do if any components are missing from the package?
- A: If any components are missing, contact customer support for assistance in obtaining the missing parts.
-
Q: Can this outlet box be used outdoors?
- A: The outlet box can be used outdoors, but it is recommended to protect it from direct exposure to water to prevent damage.
143854-75BR
Outlet Box – Bronze Five Hole 3/4 in.
All-weather
- Includes plugs, ground screw and screws.
- Items that are shaded are included in this package.
WARNING
Cancer and Reproductive Harm
www.P65Warnings.ca.gov .
Instructions on back
METAL
- Made in India
- Sigma Engineered Solutions
- Garner, NC 27529
Warning: Improper wiring of any electrical device can cause serious injury or death. These wiring devices should only be installed by a certified electrician or other qualified person. Caution: This product should be installed in accordance with the National Electrical Code and all applicable local codes and standards.
TURN OFF POWER BEFORE INSTALL NG.
- Attach mounting lugs to box using provided screws and mount to wall.
- Pull power supply wires into box, securing with appropriate fitting.
- Attach ground wire to box with green ground screw.
- Wire and mount device(s) according to manufacturer’s instructions.
- Close any remaining holes with enclosed plugs and use a silicone sealing compound for wet location installation.
- Mount cover to outlet box using gaskets as required to comply with wet location installation.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>