V I V O DESK-VE42B Electric Desk Riser Instruction Manual
- August 9, 2024
- V I V O
Table of Contents
V I V O DESK-VE42B Electric Desk Riser
Assembly Video & Product Info
www.vivo-us.com/products/desk-ve36b
CAUTION!
If you do not understand these directions, or if you have any doubts about
the safety of the installation, please contact our product support team at
309-278-5303 or help@vivo-us.com for
further assistance. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do
not use this product for any purpose that is not explicitly specified in this
manual. Do not exceed weight capacity. We cannot be liable for damage or
injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
DO NOT EXCEED WEIGHT CAPACITY
FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY.
WARNING: PINCH POINT
DO NOT PLACE HANDS ON OR NEAR SUPPORT BARS. MOVING PARTS CAN CRUSH AND CUT.
PINCH POINTS ARE CREATED DURING LIFTING AND LOWERING THE WORK SURFACE. FAILURE
TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN SERIOUS PERSONAL INJURY.
We’re Here for You
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer
immediate assistance with rapid response times. If any parts are received
damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
Give us a Call:309-278-5303
Chat Us:www.vivo-us.com
Email Us:help@vivo-us.com
Package Contents
Included Hardware & Tools
ASSEMBLY STEPS
STEP 1 Remove Desk (A) from packaging and place onto a table. Remove the shipping strap.
STEP 2 Plug AC Adapter (E) into back of the Desk Control Panel (A1) and secure by pressing down the latch. Plug the AC Adapter into a power outlet and press the up arrow to raise Desk (A) to its highest position. This will make installing the keyboard tray easier.
STEP 3 Install Mounting Brackets (B) to underside of Keyboard Tray (C) using M5x12mm Flat Head Screws (S-A) and a Phillips screwdriver.
Attach Mounting Brackets (B) to Desk (A) using M5x12mm Screws (S-B) and a Phillips screwdriver.
STEP 4 Place accessories onto Desk (A).
STEP 5 Manage cables using Cable Ties (D) and Cable Clips (F). Make sure there is enough cable slack when adjusting the desk throughout the height range.
PLEASE READ IMPORTANT WARNINGS
Keep Items Away From Edge
Always keep laptop, monitors, and other desktop items away from the edge of
the desk to prevent accidental damage or injury.
Check Cable Length
To help prevent accidental damage or device tip over, ensure your power cables
have adequate length to accommodate your chosen height setting of the desk
riser.
Route Cables Behind Riser
Follow cable routing instructions in Step 5 to prevent accidental damage to
cables.
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more