babytrend HC09XXXA Everlast 7 In 1 High Chair Instruction Manual

babytrend HC09XXXA Everlast 7 In 1 High Chair

Specifications:

• Brand: Everlast
• Model: 7-in-1 High Chair
• Manufacturer: Baby Trend, Inc.
• Address: 13048 Valley Blvd. Fontana CA 92335
• Contact: 1-800-328-7363 (8:00 a.m. ~ 4:30 p.m. PST)
• Website: www.babytrend.com

Product Information

The Everlast 7-in-1 High Chair is a versatile and safe seating solution for your child. With multiple components and features, this high chair can adapt to different stages of your child’s
growth.

Product Usage Instructions

Parts List:

• Seat Back
• Seat Base
• (2) Pins
• Seat Pad
• Height Brackets
• Youth Seat
• Seat Insert
• Front leg and wheels
• Rear Leg
• Right and Left Upper Frame Assemblies
• Tray
• Tray Insert
• Footrest

Warnings:
Fall Hazard: Always use restraints and adjust to fit snugly. Never allow the child to push away from the table.
Strangulation Hazard: Do not place the high chair near cords.

Assembly:

1. Inspect all parts before assembly.
2. Follow the assembly instructions carefully.
3. Always ensure the high chair is locked in the open position before use.

FAQ:

1. Q: Can I use the high chair for children under 6 months?
   A: No, the high chair should be used only by children at least 6 months of age.

2. Q: Can I use the booster seat in a motor vehicle?
   A: No, the booster seat should not be used in motor vehicles.

3. Q: What is the minimum adult chair size for using the booster seat?
   A: The minimum adult chair size for the booster seat is width: 15.8 inch, depth: 15.9 inch, backrest height: 4.9 inch.

4. Q: Can I lift the product with my child in it?
   A: Never lift this product with your child in it.

Read all instructions BEFORE assembly and USE of product. KEEP INSTRUCTIONS FOR FUTURE USE.
WARRANTY
DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND® FOR REPLACEMENT PARTS, SERVICE AND REPAIR.
The Baby Trend® warranty covers workmanship defects within 1 year of purchase. Any product which has been subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration or accident, or has had its serial number altered or removed invalidates all claims against the manufacturer. Any damage to property during installation is the sole responsibility of the end user.
Customer Service Department can be contacted at 1 800-328-7363 Monday through Friday between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®. Please visit http://babytrend.com/pages/limited-warranty for complete warranty details.
Baby Trend, Inc. 13048 Valley Blvd. Fontana CA 92335
1-800-328-7363 • (8:00am ~ 4:30pm PST)
www.babytrend.com

PARTS

Check that you have all the parts for this model before assembly.

WARNING

WARNING: Failure to follow these warnings and the instructions could result in serious iniury or death.
FALL HAZARD: Children have suffered severe head injuries including skull fractures when falling from high chairs. Falls can happen suddenly if child is not restrained properly.
Always use restraints, and adjust to fit snugly.
Tray is not designed to hold child in chair.
Stay near and watch child during use.
Never allow child to push away from table.

STRANGULATION HAZARD:
Do not place High Chair in any location in where there are cords, such as a window blind cords, drapes, phone cords etc.
WARNING: The child should be secured in the high chair at all times by the 5-point restraining system, either in the reclining, semi-reclining or upright position.
The tray is not designed to hold the child in the chair.
It is recommended that the high chair be used in the upright position only by children capable of sitting upright unassisted. The high chair should be used only by children at least 6 months of age. See page 18-19 for instructions on proper use of restraint system.
Other accessory items may change the balance of the high chair and cause hazardous unstable conditions. Be certain the high chair is fully erect and latched in the open position before allowing the child near the high chair. This high chair is designed to be used by a child with a maximum weight of 45 lb, (20.41 kg). The Youth Seat is designed to be used by a child at least 1 year of age. The Youth Seat is designed to be used by a child with a maximum weight of 60 lb, (27.21 kg). NEVER allow your high chair to be used as a toy. NEVER use this product if there are any loose or missing fasteners, loose joints, broken parts, or torn mesh/fabric. Check before assembly and periodically during use. Contact Baby Trend Customer Service at 1-800-328-7363 for replacement parts, repair or instructions. NEVER substitute parts.

BOOSTER SEAT TO CHAIR
WARNING: Children have suffered head injuries, including skull fractures, after falling with or from booster seats. Check that booster seat is securely attached to adult chair before each use. ALWAYS use restraints until child is able to get in and out of booster seat without help (about 2 1/2 years old). Adjust to fit snugly. NEVER allow child to push away from table. NEVER lift and carry child in booster seat. STAY NEAR and watch your child during use. ALWAYS check security of fit to adult chair before each use and limitation of the product. NEVER use this product on a stool or bench that does not have a seat back. Maximum child weight for the toddler booster is 45 lb, (20.41 kg). A WARNING: Prevent serious injury or death. Do not use in motor vehicles. A WARNING: The tray is not designed to hold the child in the chair.
WARNING: It is recommended that the booster seat be used in the upright position only by children capable of sitting upright unassisted. The booster seat should be used only by children at least 6 months of age.
WARNING: Always secure the booster seat on a chair using the bottom and back attachment straps.
Never use this booster seat on a stool or bench that does not have a seat back.

ADULT CHAIR SIZE DIAGRAM:
Always follow the safe measurements below when using the booster seat on a chair.
Minimum adult chair size for Booster Seat: width: 15.8 inch, depth: 15.9 inch, backrest height: 4.9 inch.
NEVER lift this product with your child in it.

ASSEMBLY

IMPORTANT! To ensure safe operation of your product, please follow these instructions carefully. Please keep these instructions for future reference.
IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. NEVER use if any parts are missing or broken.

• Adult assembly is required.
• Always check that the high chair is locked in the open position before using.

TO ASSEMBLE YOUTH SEAT

1. Locate the Height Brackets, Upper frames, front legs and rear legs (Fig. 1).

2. Insert the left and right sides’ Height bracket into the front tube of the Upper Frame Assembly as shown in (Fig. 2a).
   NOTE: The front tube is easily distinguished from the rear tube by the array of holes located on the backside of the front tube. Squeeze the Release Handles on both sides simultaneously and push the tube through the Height Adjusters until it locks in the highest position (Fig. 2b).

3. Insert the Legs into the ends of the front tube of both the right and left Upper Frame Assemblies (Fig. 3a).
   NOTE: Legs are properly connected when the lock buttons are lined up with the holes on the ends of the Upper Frame Assemblies. Make sure the lock buttons are engaged before use.

4. Insert another Leg into the ends of the rear tube of both the right and left Upper Frame Assemblies (Fig. 4a).
   NOTE: Legs are properly connected when the lock buttons are lined up with the holes on the ends of the Upper Frame Assemblies. Make sure the lock buttons are engaged before use.
   To lock the wheel press the latch down. To unlock lift the latch (Fig. 4b).

5. NOTE: Youth Seat comes pre-installed with seat base. You need to disassemble Youth Seat from seat base.

   • To disassemble Youth Seat from seat base, press the lever located in the bottom middle of the seat base, while pulling the seat base back from the Youth Seat (Fig 5a).
   • Align the Youth Seat into the Height Brackets. Ensure the brackets are locked into the Youth Seat (Fig. 5b).
     NOTE: Youth Seat can not be removed from the frame.

6. Slide the Footrest into the Height Bracket (Fig. 6). Lock Footrest into place.
   NOTE: Adjust the height of the footrest by squeezing both tabs simultaneously and lift up. Push both tabs and pull for removal (Fig. 6).
   ATTENTION:
   The youth seat must be connected to the frame facing the forward direction ONLY. DO NOT remove with child in the seat. TO ASSEMBLE BOOSTER SEAT

7.  Insert metal tabs (1) and (2) directly into the seat base slot until it secures into place. Ensure the backrest sits in the base correctly (Fig. 7a). 

   • Important Pin Set Up: The backrest must be in the most upright position before inserting the pins (Fig. 7b). Pins are packaged with the instructions
   • Press Pins In: Ensure the seat parts latched together in the upright position. Insert the pin all the way into each side of the seat base and test the recline feature (Fig. 7c). CAUTION: DO NOT push pin into the base only. Must catch base and backrest (Fig. 7d).

8. Loop the flap on the back of the pad over the top of the Seat Back. Connect the Seat Pad to the Seat Back with the two Elastic Loops. These fit over the Attachment Tabs located near the top harness slots (Fig. 8a).

   • Attach the bottom of Seat Pad to the Seat Base with the two Elastic loops located at the rear of the bottom of the Seat Pad. These fit over the Attachment Tabs located on the Seat Base near where the Seat Back and Seat Base Join (Fig. 8b).
   • Attach each anchor hook of the Seat Pad to the side of the seat armrest (Fig. 8c). Ensure that the slot of the anchor hook slides through the under side division (Fig. 8d). BOOSTER SEAT ATTACHMENT

9. Align the Seat Base into the Youth Seat connections. Ensure both connections click into position (Fig. 9a).
   NOTE: Check secured properly by gently pulling up on the Booster Seat and checking the tabs.

   •  Squeeze the release under the seat and lift up for removal (Fig. 9b). Always adjust the seat back to the most upright position before attaching.

   • To attach to the chair use the seat back straps located underneath the seat compartment (Fig. 9c).

   • Use the seat bottom straps located underneath the seat slot compartments (Fig. 9d).

   • Set on chair with seat back and no armrests. Make sure there are not extra padding or cushions on the chair.

   • (1) Wrap the back straps around the back of the chair. Buckle the straps making sure you hear the buckle “click” closed. (Fig. 9e).

   • (2) Wrap bottom straps around the bottom of the chair. Buckle the straps making sure you hear buckle “click” closed (Fig. 9e).

   • (3) Tighten the Booster Seat onto the chair (Fig. 9f).

   • Check that the Booster is tightly installed by attempting to move the Booster Seat from side-to-side and up. The Booster Seat should not move more than 1 inch.
     TO REMOVE BOOSTER SEAT FROM CHAIR

   • Unbuckle all straps (Fig. 9g). Turn Booster Seat over and store straps away in each compartment (Fig. 9h).
     NOTE: Close each compartment. TO ATTACH TRAY
     WARNING: Always check that the high chair is locked in the open position before using.
     WARNING: The tray is not designed to hold the child in the chair. The child should be secured in the high chair at all times by the 5-point restraining system, either in the reclining, semi-reclining or upright position. Stay near and watch child during use. Never leave child unattended

10. To attach the Tray, squeeze the release handle located underneath the tray and firmly press into the positioning slots (Fig. 10a). 

    • The Tray has a 4-position adjustment. To adjust the position, squeeze the Tray’s release handle located underneath the tray and reposition the tray to the desired position (Fig. 10b). Release the Tray’s handle. Check that the Tray is securely locked in its new position. TO ATTACH TRAY INSERT

11. The dishwasher safe food Tray Insert snaps onto the High Chair Tray and is held in place by tabs on the sides of the Tray. When installing the Tray Insert make sure that it snaps into place to prevent the child from removing the Tray Insert. To remove Insert, unsnap the tabs from the Tray (Fig. 11a).

    • The Tray may be stored on the back legs of the High Chair. Align the holes in the rear of the tray with the small pegs on the back legs (Fig. 11b).
      NOTE: To remove, lift the tray. TO USE SAFETY BELT
      WARNING: The highchair should be used only by children capable of sitting upright unassisted and at least 6 months of age.
      WARNING: Prevent serious injury or death from falls or sliding out. Always use the restraint system. The child should be secured in the high chair at all times by the 3-point / 5-point restraining system, either in the reclining, semi-reclining or upright position.

12. 3-point harness: Place the crotch strap between your child’s legs. Insert the Harness Buckles into the Center Clasp with the Button.

    • Adjust waist straps for your child’s comfort and safety by sliding buckles in either direction. Safety straps are to fit snug around your child (Fig. 12).
    • The straps of the 3-point harness have 2 attachment positions. To adjust the straps, select the slot that best fits your child. Refer to (Fig. 12). TO RELEASE SAFETY BELT

13. Push Button on Center Clasp, the two Harness Buckles will pop free (Fig. 13).

14. 5-point harness: The shoulder straps of the 5-point harness have 2 attachment positions. Select the position that places the shoulder strap level with, or below, the top of the child’s shoulders (Fig. 14a).

    • Carefully place the child in the seat and position the safety harness around the child’s waist and over the shoulders. Place the crotch strap between the child’s legs. Insert the male end of each shoulder / waist belt into the buckle on the crotch strap. Tighten the harness to be snug around the child’s waist and over the child’s shoulders (Fig. 14b). TO RELEASE SAFETY BELT

15. Push Button on Center Clasp, the two Harness Buckles will pop free (Fig. 15). RECLINE SEAT

16. Squeeze recline lever on back of the seat and adjust to the preferred recline or upright position (Fig. 16). Use caution not to trap arms, hands and fingers when adjusting recline positions. TO ADJUST SEAT HEIGHT
    WARNING: Do not adjust seat height with child in seat. Adjust seat height before placing your child in the high chair.
    WARNING: Always check that the height adjustment bracket is level and both left and right sides locked before placing child in the high chair.
    WARNING: Never rest the height adjustment bracket on the locking pins.

17. ATTENTION: Applies to Youth Seat with or without the Booster Seat attachment. Make sure the Height Brackets lock on the lowest position. DO NOT rest Height Adjustment Brackets on the Locking Pins (Fig. 17a).

    • Squeeze the Release Handles on both sides simultaneously of the Height Adjustment bracket (Fig. 17b) and adjust to the ideal position (Fig. 17c). DO NOT adjust with child in the seat. TO FOLD HIGH CHAIR
      WARNING: Do not sit on the frame when the seat is not attached. Do not use frame as a foot stool. Potential pinch point when opening the frame.
      The High Chair may be folded with the seat in any of the height positions.

18. Use the recline handle to place the Seat Back in the most upright position illustrated in (Fig. 18).

19. Pull upward on the release levers (located on the sides of the frame) and push the rear legs in the direction of the front legs until folded (Fig. 19). Chair is now ready to put away. DO NOT allow your child to play around a folded high chair as it may fall. TRAY STORAGE OPTION

20.  Squeeze the tray release handle and slide the tray out (Fig. 20).

21. Hang the tray on the hooks located on the back of the rear leg (Fig. 21).
    TO UNFOLD HIGH CHAIR
    Extend the front and rear legs outward until locked into position.
    TO REATTACH SEAT PAD
    NOTE: Certain High Chair models are packaged with the High Chair Seat Pad and Seat Insert already attached to the Seat Back.

22. Thread non-buckle end of Harness Straps called Harness Attachment Tabs through the provided slots in the Seat Fabric, Seat Insert, Seat Back, and Seat Base (Fig. 22). When Harness Attachment Tabs are through the provided slots, rotate the Harness Attachment Tabs 90 degrees. Make sure that the straps are firmly in place.

23. Revert to step 8 and follow steps (Fig. 8b to Fig. 8d).

MODES

MODES OF USE

CARE AND MAINTENANCE

WARNING: Harness Straps are NOT washable.
Dishwasher Safe Tray Insert: The Tray Insert is dishwasher safe to 160º F (71º C). Do not use scouring pads on the Tray Insert as they will damage the surface and the Tray Insert will become more difficult to clean.
High Chair/Tray: Use mild soap and wash with damp cloth. Please use only a soft bristle brush, sponge or cloth to clean the surface or remove particles of food. DO NOT submerge High Chair and Tray in water. Surface clean only.
Seat Pad and fabrics (please refer to the care label on individual soft good pieces for cleaning instructions).

To remove the seat pad:
Remove Harness Straps by pushing Harness Attachment Tabs through the Harness slots on the Seat Back, Seat Base and Seat Pad. Remove Elastic Loops from Attachment Tabs on Seat Base and Seat Back.

To attach the seat pad:
Carefully follow the instructions outlined in Step 19 on how to correctly re- thread the safety harness.
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.

BABY TREND® CUSTOMER SERVICE
The Customer Service Department can be contacted at 1 800-328-7363 Monday through Friday between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®.
Copyright © 2022, Baby Trend Inc., All Rights Reserved.

References

• Limited Warranty Coverage – Baby Trend
• Baby Trend® | Car Seats, Strollers, High Chairs, Nursery and More!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>