babytrend HC02XXXA Sit Right 2.0 3 In 1 High Chair Instruction Manual

babytrend HC02XXXA Sit Right 2.0 3 In 1 High Chair

Specifications

• Product Name : Sit Right 2.0 3-in-1 High Chair
• Manufacturer : Baby Trend, Inc.
• Address : 13048 Valley Blvd. Fontana CA 92335
• Contact : 1-800-328-7363 (8:00 a.m. ~ 4:30 p.m. PST)
• Website : www.babytrend.com

Product Usage Instructions

Parts Checklist
Before assembly, check that you have all the necessary parts including Seat Back, Seat Base, Seat Pad, Seat Insert (optional), Right and Left Upper Frame Assemblies, Front and Back Legs, Height Brackets, Tray, Tray Insert, Footrest, and (2) Pins.

Warnings
Ensure to follow all warnings provided in the manual to prevent serious injury or accidents. Make sure the child is properly restrained at all times using the 5-point restraining system.

Assembly

1. Carefully remove all parts from the box and ensure you have everything needed for assembly.
2. Assemble the Seat by inserting the Height Brackets into the front tube of the Upper Frame Assembly as shown in the illustrations provided in the manual.
3. Connect the legs to the Upper Frame Assemblies ensuring that the lock buttons are engaged before use.
4. Complete the assembly process by following the detailed instructions provided in the manual.

BABY TREND® CUSTOMER SERVICE

The Customer Service Department can be contacted at 1 800-328-7363 Monday through Friday between  8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®.

Check that you have all the parts for this model before assembly.

ASSEMBLY

WARNING

WARNING : Failure to follow these warnings and the instructions could result in serious injury or death.

FALL HAZARD: Children have suffered severe head injuries including skull fractures when falling from high chairs. Falls can happen suddenly if child is not restrained properly.

• Always use restraints, and adjust to fit snugly.
• Tray is not designed to hold child in chair.
• Stay near and watch child during use.
• Never allow child to push away from table.

STRANGULATION HAZARD:
Do not place High Chair in any location in where there are cords, such as a window blind cords, drapes, phone cords etc.

WARNING : The child should be secured in the high chair at all times by the 5-point restraining system, either in the reclining, semi-reclining or upright position. The tray is not designed to hold the child in the chair.

It is recommended that the high chair be used in the upright position only by children capable of sitting upright unassisted. The high chair should be used only by children at least 6 months of age. See page 11 for instructions on proper use of restraint system.

• Other accessory items may change the balance of the high chair and cause hazardous unstable conditions.

• Be certain the high chair is fully erect and latched in the open position before allowing the child near the high chair.

• This high chair is designed to be used by a child with a maximum weight of 40 pounds, (18.14 kg.)

• NEVER allow your high chair to be used as a toy.

• NEVER use this product if there are any loose or missing fasteners, loose joints, broken parts, or torn mesh/fabric. Check before assembly and periodically during use. Contact Baby Trend® Customer Service at 1- 800-328-7363 for replacement parts, repair or instructions.
  NEVER substitute parts.

• IMPORTANT! To ensure safe operation of your product, please follow these instructions carefully. Please keep these instructions for future reference.

• IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. NEVER use if any parts are missing or broken.

• IMPORTANT! Adult assembly is required.

• IMPORTANT! Always check that the high chair is locked in the open position before using.

ATTENTION : Carefully remove parts from box. Check that you have all the parts for this model before assembling the high chair.

NOTE : Certain High Chair models are packaged with the High Chair Seat Fabric and Seat Insert already attached to the Seat Back.

TO ASSEMBLE SEAT

1. Locate the Right and Left Upper Frame Assemblies and the Height Brackets (Fig. 1).
   PAIR UP TO JOIN:
   Pair the Right and Left Upper Frame Assemblies with the Right and Left Height Brackets as shown in the illustration (Fig. 1).

2. NOTE: The front tube is easily distinguished from the rear tube by the array of holes located on the backside of the front tube. Insert the left and right sides Height bracket into the front tube of the Upper Frame Assembly as shown in (Fig. 2a).

   • Squeeze the Release Handles on both sides simultaneously and push the tube through the Height Adjusters until it locks in the highest position (Fig. 2b).

3. Insert the Legs into the ends of the front tube of both the right and left Upper Frame Assemblies (Fig. 3).
   NOTE : Legs are properly connected when the lock buttons are lined up with the holes on the ends of the Upper Frame Assemblies. Make sure the lock buttons are engaged before use.

4. Insert another Leg into the ends of the rear tube of both the right and left Upper Frame Assemblies (Fig. 4). NOTE: Legs are properly connected when the lock buttons are lined up with the holes on the ends of the Upper Frame Assemblies. Make sure the lock buttons are engaged before use.

5.  Insert metal tabs (1) and (2) directly into the seat base slot until it secures into place. Ensure the backrest sits in the base correctly (Fig. 5a).

   • Important Pin Set Up The backrest must be in the most upright position before inserting the pins (Fig. 5b).

   • Press Pins In  Ensure the seat parts are latched together in the upright position. Insert the pin all the way into each side of the seat base and test the recline feature (Fig. 5c).
     CAUTION : DO NOT push the pin into the base only. Must catch base and backrest (Fig. 5d).

   • Align the Seat Base into the Height Brackets. Ensure the brackets are locked into the Seat Base (Fig. 5e).

6. Slide the Footrest into the HeightBracket (Fig. 6). Lock Footrest into place.
   NOTE : Adjust the height of the footrest by squeezing both tabs simultaneously and lift up (Fig. 6).
   REMOVAL : Remove the footrest by squeezing both tabs simultaneously and pull out from the height bracket.

7. Loop the flap on the back of the pad over the top of the Seat Back. Connect the SeatPad to the Seat Back with the two Elastic Loops. These fit over the Attachment Tabs located near the top harness slots (Fig. 7a).

   • Attach the bottom of the Seat Pad to the Seat Base with the two Elastic loops located at the rear of the bottom of the Seat Pad. These fit over the Attachment Tabs located on the Seat Base near where the Seat Back and Seat Base Join (Fig. 7b).
   • Attach each anchor hook of the Seat Pad to the side of the seat armrest (Fig. 7c). Ensure that the slot of the anchor hook slides through the underside division (Fig. 7d).
   • WARNING : Always check that the high chair is locked in the open position before using it.
   • WARNING : The tray is not designed to hold the child in the chair. The child should be secured in the high chair at all times by the 5-point restraining system, either in the reclining, semi-reclining or upright position.
   • TO ATTACH TRAY

8. To attach the Tray, squeeze the release handle located underneath the tray and firmly press into the positioning slots (Fig. 8a).
   The Tray has a 4-position adjustment. To adjust the position, squeeze the Tray’s release handle located underneath the tray and reposition the tray to the desired position (Fig. 8b). Release the Tray’s handle. Check that the Tray is securely locked in its new position.
   TO ATTACH THE TRAY INSERT

9. The dishwasher-safe food Tray Insert snaps onto the High Chair Tray and is held in place by tabs on the sides of the Tray. When installing the Tray Insert make sure that its snaps into place to prevent the child from removing the Tray Insert. To remove Insert, unsnap the tabs from the Tray.
   The Tray may be stored on the back legs of the High Chair. Align the holes in the rear of the tray with the small pegs on the back legs (Fig. 9). NOTE: To remove, lift the tray.
   TO USE SAFETY BELT
   

   • WARNING : The highchair should be used only by children capable of sitting upright unassisted and at least 6 months of age.
   • WARNING : Prevent serious injury or death from falls or sliding out. Always use the restraint system. The child should be secured in the high chair at all times by the 5-point restraining system, either in the reclining, semi-reclining or upright position.

10. The shoulder straps of the 5-point harness have 2 attachment positions. Select the position that places the shoulder strap level with, or below, the top of the child’s shoulders (Fig. 10a).
    Carefully place the child in the seat and position the safety harness around the child’s waist and over the shoulders. Place the crotch strap between the child’s legs. Insert the male end of each shoulder/waist belt into the buckle on the crotch strap. Tighten the harness to be snug around the child’s waist and over the child’s shoulders (Fig. 10b).
    TO RELEASE SAFETY BELT

11. Push Button on Center Clasp, the two Harness Buckles will pop free (Fig. 11).
    RECLINE SEAT

12.  Squeeze recline lever on back of the seat and adjust to the preferred recline or upright position (Fig. 12).
    Use caution not to trap arms, hands and fingers when adjusting recline positions. TO ADJUST SEAT HEIGHT

    • WARNING : Do not adjust seat height with a child in the seat. Adjust seat height before placing your child in the high chair.
    • WARNING : Always check that the height adjustment bracket is level and both left and right sides locked before placing child in the high chair.
    • WARNING : Never rest the height adjustment bracket on the locking pins.

13.  Squeeze the Release Handles on both sides simultaneously of the Height Adjustment bracket (Fig. 13a) and adjust to the ideal position (Fig. 13b). DO NOT adjust with child in the seat.
    ATTENTION : Make sure the Height Brackets lock on the lowest position.
    DO NOT rest Height Adjustment Brackets on the Locking Pins (Fig. 13c).

    • TO FOLD HIGH CHAIR
      The High Chair may be folded with the seat in any of the height positions.

14. Place the seat in the desired height position. Place the Seat Back in the most upright position (Fig. 14).

15. Squeeze the tray release handle and slide the tray out (Fig. 15).

16.  Hang the tray on the hooks located on the back of the rear leg (Fig. 16).

17. Pull upward on the release levers (located on the sides of the frame) and push the rear legs in the direction of the front legs until folded (Fig. 17). The Chair is now ready to put away. DO NOT allow your child to play around a folded high chair as it may fall. TO UNFOLD THE HIGH CHAIR

    • Read the Warning and see (Fig. 17), then Reverse the steps above.
      WARNING : Do not sit on the frame when the seat is not attached. Do not use frame as a foot stool. Potential pinch point when opening the frame.

18. Thread the non-buckle end of Harness Straps called Harness Attachment Tabs through the provided slots in the Seat Fabric, Seat Insert, Seat Back, and Seat Base (Fig. 18). When Harness Attachment Tabs are through the provided slots, rotate the Harness Attachment Tabs 90 degrees. Make sure that the straps are firmly in place.

19. Loop the flap on the back of the pad over the top of the Seat Back. Connect the Seat Pad to the Seat Back with the two Elastic Loops. These fit over the Attachment Tabs located near the top harness slots (Fig. 19).

20. Attach the bottom of Seat Pad to the Seat Base with the two Elastic loops located at the rear of the bottom of the Seat Pad. These fit over the Attachment Tabs located on the Seat Base near where the Seat Back and Seat Base Join (Fig. 20a).

    • Attach each anchor hook of the Seat Pad to the side of the seat armrest (Fig. 20b).
    • Ensure that the slot of the anchor hook slides through the underside division (Fig. 20c).
    • TO REMOVE THE SEAT PAD
      Reverse the previous steps.
      OPTIONAL SEAT INSERT

21.  Set Seat Insert onto Seat Pad. See step 18.

CARE AND MAINTENANCE

WARNING : Harness Straps are NOT washable.

• Dishwasher Safe Tray Insert: The Tray Insert is dishwasher safe to 160º F (71º C). Do not use scouring pads on the Tray Insert as they will damage the surface and the Tray Insert will become more difficult to clean.
• High Chair/Tray: Use mild soap and wash with a damp cloth. Please use only a soft bristle brush, sponge or cloth to clean the surface or remove particles of food. DO NOT submerge High Chair and Tray in water. Surface clean only.

Seat Pad and fabrics (please refer to the care label on individual soft good pieces for cleaning instructions).

• To remove the seat pad:
  Remove Harness Straps by pushing Harness Attachment Tabs through the Harness slots on the Seat Back, Seat Base, and Seat Pad. Remove Elastic Loops from Attachment Tabs on the Seat Base and Seat Back.

• To attach the seat pad:
  Carefully follow the instructions outlined in Step 19 on how to correctly re- thread the safety harness.

Copyright © 2024, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.

WARRANTY

DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT  BABY TREND® FOR REPLACEMENT PARTS, SERVICE AND REPAIR.
The Baby Trend® warranty covers workmanship defects within 1 year of purchase. Any product that has been subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration, or accident, or has had its serial number altered or removed invalidates all claims against the manufacturer. Any damage to property during installation is the sole responsibility of the end user.

Customer Service Department can be contacted at 1 800-328-7363 Monday through Friday between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®. Please visit
http://babytrend.com/pages/limited-warranty for complete warranty details.

Baby Trend, Inc.

• 13048 Valley Blvd. Fontana CA 92335
• 1-800-328-7363
• (8:00am ~ 4:30pm PST)
• www.babytrend.com

FAQ

Q: What age range is suitable for using this high chair?
A: The high chair should be used only by children at least 6 months of age. Refer to page 11 of the manual for more details on proper use.

References

• Limited Warranty Coverage – Baby Trend
• Baby Trend® | Car Seats, Strollers, High Chairs, Nursery and More!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>