HAMPTON BAY Beacon Park Steel Woven Swivel Chair User Guide
- June 7, 2024
- HAMPTON BAY
Table of Contents
- HAMPTON BAY Beacon Park Steel Woven Swivel Chair
- Import ant Safety Instructions
- PACKAGE CONTENTS
- CONNECTING THE RIGHT ARM TO THE SEAT
- ATTACHING THE BACKREST TO THE SEAT AND THE RIGHT ARM
- CONNECTING THE LEFT ARM TO THE SEAT AND THE BACKREST
- CONNECTING THE ARMS TO THE BACKREST
- ATTACHING THE GLIDER BASE TO THE ARMS
- TIGHTENING ALL BOLTS, CONNECTING THE SUPPORT BAR TO THE SWIVEL BASE
- CHECKING THE CHAIR
- Care and Cleaning
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HAMPTON BAY Beacon Park Steel Woven Swivel Chair
Import ant Safety Instructions
WARNING : This swivel chair was made for the explicit purpose of providing outdoor functions and is not to be used as a toy. This product is intended for normal outdoor use; however, the manufacturer recommends storing and / or covering this product when any formidable / severe weather is approaching.
To reduce the risk of injury to persons:
- Close supervision is necessary when this product is used by or near children, or disabled persons, if applicable.
- Use this product only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
- Do not move the chair while the chair is occupied. Failure to obey this caution could result in injury.
- Please keep children out of the assembly area before assembly.
WARNING : Do not place heavy objects on the chair
WARNING : Weight limit for chair is 300 lbs (136.07 Kg) for each seat.
WARNING : This chair unit is heavy, and may require two adults for safe
assembly.
CAUTION : Do not locate the product near any! heat source.
Warranty
3 YEAR FRAME AND 3 YEAR FABRIC LIM ITED WARRANTY
WHAT IS COVERED
We warrant the frames to be free of manufacturing defects to the original
purchaser for three years, and a three year limited warranty for the fabric.
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges
to and from our service center. This warranty does not cover commercial use,
hardware, acts of nature, fire, freezing and abusive use. In addition,
purchased parts are not covered under this warranty. We reserve the right to
make substitutions with similar merchandise, if the model in question is no
longer in production. Contact the
Customer Service Team at 1-855-HD-HAMPTON or visit
www.Hamptonbay.com
Pre-Assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface
such as carpet or cardboard.
HARDWARE INCLUDED
NOTE : Hardware not shown to actual size.
| Part | Description | Quantity |
|---|---|---|
| AA | M6x20 combination bolt | 6+1 |
| BB | M6x50 combination bolt | 4+1 |
| CC | M6x18 countersunk bolt | 4 |
| DD | M6 plastic washer | 4 |
| EE | Hex wrench | 1 |
PACKAGE CONTENTS
| Part | Description | Quantity |
|---|---|---|
| A | Right arm | 1 |
| B | Left arm | 1 |
| C | Seat | 1 |
| D | Backrest | 1 |
| E | Glider base | 1 |
| F | Swivel base | 1 |
| G | Back cushion | 1 |
| H | Seat cushion | 1 |
CONNECTING THE RIGHT ARM TO THE SEAT
- Place the right arm (A) on a soft surface.
- Do not fully tighten all bolts at this step.
- Align the holes on the right panel of the seat (C) to the holes on the front of the right arm (A), and secure by using M6x20 combination bolts (AA).
ATTACHING THE BACKREST TO THE SEAT AND THE RIGHT ARM
- Attach the backrest (D) to the right arm (A) and the seat (C) using an M6x20 combination bolt (AA) and M6x50 combination bolts (BB).
- Do not fully tighten all bolts at this step.
CONNECTING THE LEFT ARM TO THE SEAT AND THE BACKREST
- Connect the left arm (B) to the seat (C) and the backrest (D) using M6x20 combination bolts (AA).
- Do not fully tighten all bolts at this step.
CONNECTING THE ARMS TO THE BACKREST
- Connect the back of the right and the left arm (A & B) to the backrest (D) by inserting M6x50 combination bolts (BB).
- Do not fully tighten all bolts at this step.
ATTACHING THE GLIDER BASE TO THE ARMS
- Attach the glider base (E) to the arms (A & B) using M6x18 countersunk bolts (CC) and M6 plastic washers (DD).
- Do not fully tighten all bolts at this step.
TIGHTENING ALL BOLTS, CONNECTING THE SUPPORT BAR TO THE SWIVEL BASE
- Once all of the bolts are in place, fully tighten the bolts using the hex wrench (EE).
- Turn the chair right side up, and insert the support bar to the swivel base (F).
CHECKING THE CHAIR
- Place the seat and the back cushion (H & G) to finish the assembly of the chair.
- Ensure all connections are secure before use.
Care and Cleaning
- For best results, clean the chair with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt particles that may accumulate.
- Do not clean with abrasive materials, bleach, or solvents.
- Store the chair in a dry, sheltered place when not in use.
- Keep the chair away from fire, extreme heat, freezing conditions, and inclement weather such as rain, hail, sleet, snow, or wind.
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service.
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
Retain this manual for future use.
1-855-HD-HAMPTON
HAMPTONBAY.COM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>