POBOVi 2BF7D Mesh Communicator Walkie Talkies User Guide

POBOVi 2BF7D Mesh Communicator Walkie Talkies

Specifications

• Power On Method: Press-and-hold mode button and volume up button
• Networking: Click the mode button twice to enter the networking mode
• Mute Mode: Press-and-hold mode button for 2 seconds
• Bluetooth Mode: Click the mode button once
• Charging: USB-C cable

Product Usage Instructions

• Power On:
  • To power on the device, press and hold the mode button and the volume up button simultaneously.
• Switching Modes:
  • After powering on, the device defaults to Bluetooth mode. Click the mode button once to switch to Intercom mode.
• Networking:
  • To start the networking process, click the mode button twice on one of the devices. Wait to hear “enter networking mode” and then “networking successful.”
• Connect with Others:
  • To group with others, hold the new device near each other. Click the mode button twice on the connected device until you hear “enter networking mode” and then “networking successful.”
• Leaving a Group:
  • To leave a group, either power off the device or switch to Bluetooth mode.
• Clear Networking Information:
  • In Intercom mode, press and hold the mode button and volume down button to clear networking information. To reconnect, start from step 1.
• Other Functions:
  • Mute Mode: Press and hold the mode button for 2 seconds to enter/exit mute mode.
  • Bluetooth Mode: Click the mode button once to enter Bluetooth mode for phone connectivity.
• Clear Bluetooth Information:
  • In Bluetooth mode, press and hold the mode button and volume down button for 2 seconds to clear Bluetooth information.

FAQs

• Not on the Same Group?
  • If devices are networked separately, clear networking information for each device and start from step 1.
• Unsuccessful Connection?
  • If unsuccessful, power off the device and try again.
• No Sound after Successful Networking?
  • If you can’t hear sound within 3 meters after successful networking, move away from your partner for a normal call due to the noise cancellation function.

Quick Start

• Step 1: Power On
  • Press and hold the mode button and the volume up button.
• Step 2: Preparing
  • After powering on, the device defaults to the Bluetooth mode. Click the mode button once to switch to the Intercom mode.
• Step 3: Networking
  • Click the mode button twice on one of the devices to start the networking process. you will hear “enter networking mode”, wait for a while, and hear “networking successful”.

Connect with Others

Join a Group

To group with others, after finishing step 2, then hold the new devices near each other, hold one of the device that is already connected, and click the mode button twice until you hear “enter networking mode”, wait for a while and hear “networking successfully”.

Leave a Group

• Method 1: Power off
  • Press and hold the mode button and the volume up button.
• Method 2: Switch mode Click the mode button to the Bluetooth mode. If you want to get back to the group, you can switch over to the Intercommode.

Clear the Networking Information

• In Intercom mode, press and holdthe mode button and the volume down button. You will clear the information about the current networking device. If you want to connect again, you need to start from step 1.

Other Function

Mute Mode

Press and hold the mode button for 2 seconds to enter mute mode until you hear “mute on”.Repeat the operation to cancel mute mode until you hear“mute off”.

Bluetooth Mode

• Click the mode button once until you hear“Bluetooth mode”.You can connect the device to your phone and play music as a portable speaker.

One-click the mode button:

• Answer a call/hang up a call

Double-click the mode button:

• Reject a call

Clear the Bluetooth Information

• In Bluetooth mode, Hold the mode button and volume down button for 2 seconds

Success Tips

Not on the Same Group

• Due to a false touch, multiple devices are networked separately and cannot be connected in one group. You need to clear the networking information for each device and start from step 1.

Unsuccessful Connection?

• Please power it off (Press-and-hold the mode button and the volume up button at the same time)and try again.

Can’t hear the sound after the networking is successful?

• After the networking is successful, if you can’t hear the sound within 3 meters, you’ll need to stay away from your partner to make a normal call. Because we did the noise cancellation function.

Feature & Controls

Charging

• Use a USB-C cable to charge from any power adapter.
  • Still charging
  • Fully charged
• Customer Support:[email protected].

FCC

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC warning:

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC rules. Theselimitsaredesigned to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction. The Wetalk-Air has been tested for body-worn Specific Absorption Rate (SAR) compliance. The FCC has established detailed SAR requirements and has established these requirements. RF Exposure Information The radio module has been evaluated under FCC Bulletin C95.1 and IEEE 1528 and found to be compliant with RF Exposure from radio frequency devices. This model meets the applicable government requirements for exposure to radio frequency waves. The highest reported SAR level for usage near the body (0mm) is 0.815W/kg, and for the simultaneous transmission is 0.815W/kg

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>