DATALOGIC CODISCAN HS7600 Bluetooth Wearable Scanner User Guide
- August 6, 2024
- DATALOGIC
Table of Contents
**DATALOGIC CODISCAN HS7600 Bluetooth Wearable Scanner User Guide
**
Read the following QR code for quick access to the product page.
This allows you access to download Data Sheets, Manuals, Software & Utilities,
and Drawings.
Hover over the Support & Service menu for access to Services and Technical
Support.
Product page
Read the following QR code to download the Aladdin App for a quick and user-
friendly configuration method via Bluetooth
Aladdin App
Read the following QR code to access Aladdin web-based configuration program.
Here you can start an offline configuration or download the PC-based version.
Aladdin
PARTS OF THE READER
- Scan window
- Multi functional button
- Recharge, trigger and USB contact area
- LED s
SETTING UP THE SYSTEM
Follow the steps below to connect and get your reader up and communicating with its host.
- Charge the device on a charging station (optional).
- Mount the device onto the preferred mounting support (optional).
- Connect to host using one of the three pairing barcodes shown in the table below. If it has not been previously linked to a host, the device will be in discoverable HOGP mode when it is powered on. The rear blue LED will flash for 3 minutes.
- Configure (optional).
MULTI FUNCTIONAL BUTTON
| BUTTON | FUNCTION |
|---|---|
| Press once and hold <5 second | Device reads the label |
| Double Press (only on iOS) | Enable and disable virtual keybo- ard on the |
screen of the connected host.
Triple Press| If the device is connected to a host via Bluetooth, the rear LED
turns blue for 2 seconds
Press and hold 5-9 seconds| Check battery status: Green LED (Charge >
50%)Orange LED (Charge < 50%)
Hold >10 seconds| Unlink from any connected host
Press >5 seconds the hand trigger with the device inserted + multinational
button| H W reset
Mountings
The device can be mounted on two different mountings:
- adjustable multisize hand trigger
- wearable extensible lanyard for neck and belt
For more information on how to mount and use the device on the two different mountings, see the CODiScan Accessory Instruction Manual.
Connectivity
To connect the device to the host, follow one of the following procedures:
- Connect with GWU-HS7600 (Gateway Bluetooth / Wi-Fi) accessory by reading the connection label present on the Gateway top. To learn more about the Gateway, see the specific instruction manual.
- For Bluetooth host connection read “Unlink” label below if any other Bluetooth connection is active on device. Read Link label below to activate discoverable mode based on the Bluetooth profile needed (HID or SPP). Follow host instruction (“Add device” in Bluetooth settings) to create the connection. When connection is completed, a pairing sound is emitted.
- For App connection, read the label shown in Aladdin and follow the instructions.
- USB connection available through GWU-HS7600 and SC-HS7600 accessories.
Link Scanner as Serial Device (SPP) to a Bluetooth Host
Link Scanner as HID device to a Bluetooth host (keyboard emulation)
Link Scanner as HOGP device to a Bluetooth LE host (keyboard emulation)
Reset Product Defaults
Un link
Power Off
Battery Charge Status – LED Description
When the device is inserted in a charging station, the LED s show its charging status. See table below:
| LED | CHARGING STATUS |
|---|---|
| Off | Scanner is not charging |
Out of charging temperature limits
Blinking Orange (charge <50%) Blinking Green (charge >50%)| Charge in Progress
Solid Green| Charge complete
Datalogic S.r.l.
Via San Vitalino 13
40012 Calderara di Reno (BO)
Italy
Tel. +39 051 3147011
Fax : +39 051 3147205
©2024 Datalogic S.p.A. and/or its affiliates
All rights reserved. Without limiting the rights under copyright, no part of
this documentation may be reproduced, stored in or introduced into a retrieval
system, or transmitted in any form or by any means, or for any purpose,
without the express written permission of Datalogic S.p.A. and/ or its
affiliates.
Owners of Datalogic products are hereby granted a non-exclusive, revocable
license to reproduce and transmit this documentation for the purchaser’s own
internal business purposes. Purchaser shall not remove or alter
any proprietary notices, including copyright notices, contained in this
documentation and shall ensure that all notices appear on any reproductions of
the documentation.
Electronic versions of this document may be downloaded from the Datalogic
website : (www.datalogic.com). If you visit
our website and would like to make comments or suggestions about this or other
Datalogic publications, please let us know via the “Contact” page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however, Datalogic shall not be liable for technical or editorial errors or omissions contained herein, nor for incidental or consequential damages resulting from the use of this material. Datalogic reserves the right to change any specification at any time without prior notice.
Trademarks
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U. CODiScan and Aladdin are trademarks of Datalogic S.p.A. and/or its affi- liates. The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc and any use of such marks by Datalogic S.p.A and/or its affiliates is under license. All other brand and product names may be trademarks of their respective owners.
Bluetooth® Wearable Scanner
©2024 Datalogic S.p.A. and/or its affiliates
- All rights reserved
- Without limiting the rights under copyright, no part of this documentation may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or for any purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates
- Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S. and the E.U.
See the Safety & Regulatory Addendum included with your product for additional regulatory, safety and legal information.
