DATALOGIC DL363SD Memor 10 3 Slot Dock User Guide
- June 3, 2024
- DATALOGIC
Table of Contents
DATALOGIC DL363SD Memor 10 3 Slot Dock
See the Safety & Regulatory Addendum included with your product for additional regulatory, safety and legal information.
Out of the Box
The package contains:
- Dock
- Rubber feet (x8)
- Quick Start Guide
- Safety & Regulatory Addendum
Remove all the components from their packaging; check their integrity and compare them with all the packing documents.
| Keep the original packaging for use when sending products to the technical
assistance center. Damage caused by improper packaging is not covered under
the warranty
---|---
General View
Front View
Back View
Mount the Rubber Feet
Attach the self-adhesive rubber feet to the bottom of the dock as shown below:
Power the Dock
| Use only the Datalogic power supply 94ACC0197 to power the dock.
---|---
Charge the Memor 10
Insert the device into the dock with the screen facing front and the head
facing up.
The dock is able to provide wireless power to the Memor 10 when the device is
correctly inserted.
| Make sure there is nothing between the dock and the device. Do not put any
foreign object such as, but not limited to, coins, paper clips, stickers
inside the slot of any of the docks. Do not apply any sticker to the Memor 10
(see the examples below)
---|---
| Do not attempt to charge any other device different from the
Memor 10 devices.
---|---
LED Indicators
| LED Behavior | Operation Status |
|---|
Power ON
| Solid green | Dock is powered |
|---|
Foreign Object Detection (FOD)
| Blinks red slow at 0.625Hz | Foreign object detected, output power is reduced. |
|---|---|
| Blinks red fast at 2.5Hz | Foreign object detected, output power is further |
reduced.
Solid red| Foreign object detected, output power is disabled.
| In case of FOD led blinking, remove the foreign object.
---|---
Technical Specifications
Electrical Features
Indicators Consumption| Power on LED (green) FOD LED (red)
Environmental Features
Working Temperature| 0°C to 40°C
Storage Temperature| -30°C to 70°C
Humidity| 5-95% non condensing
Mechanical Features
Dimensions| 104 x 126 x 297 mm / 4.09 x 4.96 x 11.69 in
Weight| 725 g / 25.57 oz
Datalogic S.r.l.
Via San Vitalino 13
40012 Calderara di Reno (BO)
Italy
Tel. +39 051 3147011
Fax +39 051 3147205
©2022 Datalogic S.p.A. and/or its affiliates
♦All rights reserved. ♦ Without limiting the rights under copyright, no part
of this documentation may be reproduced, stored in or introduced into a
retrieval system, or transmitted in any form or by any means, or for any
purpose, without the express written permission of Datalogic S.p.A. and/ or
its affiliates. Owners of Datalogic products are hereby granted a
nonexclusive, revocable license to reproduce and transmit this documentation
for the purchaser’s own internal business purposes. Purchaser shall not remove
or alter any proprietary notices, including copyright notices, contained in
this documentation and shall ensure that all notices appear on any
reproductions of the documentation. Should future revisions of this manual be
published, you can acquire printed versions by contacting your
Datalogic representative. Electronic versions may either be downloadable from
the Datalogic website (www.datalogic.com) or provided on appropriate media. If
you visit our website and would like to make comments or suggestions about
this or other Datalogic publications, please let us know via the “Contact
Datalogic” page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual
that is complete and accurate, however, Datalogic reserves the right to change
any specification at any time without prior notice. Datalogic and the
Datalogic logo are registered trademarks of Datalogic S.p.A. in many
countries, including the U.S.A. and the E.U.
Memor is a trademark of Datalogic S.p.A. and/or its affiliates. All other
brand and product names may be trademarks of their respective owners.
Patents
See www.patents.datalogic.com for patent list.
Support Through the Website
Datalogic provides several services as well as technical support through its
website. Log on to www.datalogic.com and click
on the SUPPORT link which gives you access to:
Downloads by selecting your product model from the dropdown list in the
Search by Product field for specific Data Sheets, Manuals, Software &
Utilities, and Drawings;
Repair Program for On-Line Return Material Authorizations (RMAs)
plus Repair Center contact information;
Customer Service containing details about Maintenance Agreements;
Technical Support through email or phone.
Warranty Terms and Conditions
The warranty period is 1 year for the device and 90 days for consumables
(e.g. battery, power supply, cable etc.) from date of purchase at our
company
©2022 Datalogic S.p.A. and/or its affiliates. All rights reserved. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S. and the E.U.
Documents / Resources
|
DATALOGIC DL363SD Memor 10 3 Slot
Dock
[pdf] User Guide
DL363SD, U4GDL363SD, DL363SD Memor 10 3 Slot Dock, DL363SD, Memor 10 3 Slot
Dock, Memor 10, 3 Slot Dock, Slot Dock, Memor Slot Dock
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>