Nieuw Handdoek Radiator Electric Op 220v User Manual
- June 16, 2024
- Nieuw
Table of Contents
Nieuw Handdoek Radiator Electric Op 220v
Product Information
Specifications:
- Power supply specification: AC230V/50HZ
- Operating temperature range: 0-55°C
- Set temperature range: 30-70°C
- Time mode: 24-hour
- Week mode: digital display 1-7
- System mode: free, schedule, constant temperature, timing
Product Usage Instructions
LCD Display:
The LCD display provides various icons and information to assist with the operation of the controller.
Icon Display Instructions:
- Free mode: Temperature can be set separately, shown as [icon] , adjustable range is 30-70°C.
- Constant temperature mode: Temperature is not adjustable, shown as [icon] , the temperature is fixed at 50°C.
- Timing mode: The temperature is fixed at 65°C, shown as [icon]. The drying time can be adjustable, ranging from 30 minutes to 8 hours.
- Schedule mode: Timing function, shown as [icon].
- Time and temperature display: Displays the set temperature and time, shown as [icon].
- Heating function: Indicates that the heater is working, shown as [icon].
- Child lock: Prevents operation of any keys (except open and close), shown as [icon].
- Timeline: Allows adjustment of timing time, adjusting range is 0-23 hours, shown as [icon].
Keys Description:
- Open and Close: Located at the upper left of the controller.
- Function: Located at the lower left of the controller.
- Add: Located at the upper right of the controller.
- Minus: Located at the lower right of the controller.
Mode Operation Instructions:
Boot Up:
Short press [button] to enter from shutdown state to boot state. In the
shutdown state, short pressing any other button will not activate the product.
Shutdown display time is shown as [display].
Free Mode:
In free mode, press [button] or [button] to set the temperature.
Short press [button] to increase the temperature and short press
[button] to decrease the temperature by one step. Long pressing or holding
for 1 second will activate the acceleration function. If you press
[button] , the controller will switch to timing mode.
Timing Mode:
In timing mode, the heating temperature is fixed at 65°C. Press [button] or [button] to set the timing mode time. Short press [button] to increase the time and short press [button] to decrease the time by 30 minutes per step. Long pressing or holding for 1 second will activate the acceleration function. After the timer expires,the device will enter standby mode. If you press [button] , the controller will switch to constant temperature mode.
Constant Temperature Mode:
In constant temperature mode, the heating temperature is fixed at 50°C and cannot be changed.
If you press [button] , the controller will switch to schedule mode.
Schedule Mode:
Schedule mode allows for time, week, and weekly program setting.
In the first use of the equipment (or in a power-off status), you should set
the time and week first.
Time Setting: Long press [button] for 3 seconds to enter time
setting.
Firstly, set the hour by pressing [button].
Adjusting range is from 0 to 23 hours with a step of 1 hour. Long pressing
[button] will activate the acceleration function. After hour setting is
completed, short press [button] and the minute time 00 will flash (flash
every 0.5 seconds). Short press [button] to adjust the minute, adjusting
range is from 0 to 59 minutes with a step of 1 minute. Long pressing
[button] will activate the acceleration function. After setting the time,
short press [button] to enter week set. If there is no operation within 30
seconds, it will exit time setting and enter minute setting.
FAQ:
Q: What is the power supply specification for the controller?
A: The power supply specification is AC230V/50HZ.
Q: What is the operating temperature range of the controller?
A: The operating temperature range is from 0 to 55°C.
Q: Can I adjust the temperature in constant temperature mode?
A: No, the temperature is fixed at 50°C in constant temperature mode and
cannot be adjusted.
LCD controller
SAFETY GUIDE
- Do not open the case in any condition.
- Never use device that is damaged in any way.
- Please check the input voltage used in your home equals to the marking on the label of device prior to connect it.
- The power cable should not be repaired once it is damaged. Asking help from an agency or specialized shop for replacement.
- Always ground the device.(Connect to a grounded socket)
- The device should not be connected to a power socket while being installed.
- Do not use the device no other open flame equipment. The product is designed to fit with towel warmer. Be caution of the level of liquid agent. The heating element must work in a full liquid agent environment. Do not let it work in dry condition.
- Do not splash water or other liquids on the plastic body of the device.
- Do not touch the device with a wet body.
- The device is not allowed to be operated by children or persons with limited mental capacity.
Please read this manual carefully before you start using the controller.
Technical information
- Power supply specification:AC230V/50HZ
- Operating temperature range:0～55℃
- Set temperature range:30～70℃
- Time mode:24-hour
- Week mode:digital display 1~7
- System mode:free,schedule,constant temperature,timing
LCD display
Icon display instructions
- Free mode:Temperature can be set separately,shown as , the adjustable range is 30℃～70℃.
- Constant temperature mode: Temperature is not adjustable, shown as ,the temperature is fixed at 50℃.
- Timing mode: The temperature is fixed at 65℃,shown as ,drying time can be adjustable,the adjustable range is from 30 minutes to 8 hours.
- Schedule mode:Timing function,shown as .
- Time and temperature display:Display setting temperature and time,shown as
- Heating function:The heater is working,shown as
- Child lock:Unable to operate any keys(except open and close),shown as`` .
- Timeline:Timing time can be adjusted,adjusting range is 0~23H,shown as
- Keys description:
Mode operation instructions
Boot up:
Short press to enter from shutdown state to boot state(in the shutdown state,
short press any other button products will not react).Shutdown display
time,shown as
Free mode :
shown as 
,short press or to set the temperature in
free mode,short press to increase the temperature,short press to decrease the
temperature,1℃ by one step.long press or 1s will have acceleration function.
In the free mode,if you press ,controller will be switched to timing mode .
Timing mode :
The heating temperature is fixed at 65℃,the heating time can be adjusted from
30 minutes to 8 hours.shown as Short press or to set timing mode time,short
press to increase time,short press to decrease time,30 minutes by one
step.Long press or 1s will have acceleration function.After the timer expires,
the device will enter standby mode.
In the timing mode,if you press ,controller will be switched to constant
temperature mode.
Constant temperature mode :
The heating temperature is fixed at 50℃,shown as
,temperature cannot be
changed in this mode.
In the constant temperature mode,if you press ,controller will be switched to
schedule mode.
Schedule mode :
Schedule mode allows for time, week, and weekly program Setting, in the first
use of equipment (or in a power off status), you should set time, week at
first .shown as
-
Time setting: Long press 3s to enter time setting,firstly set as an hour,shown as ,short press or to adjust the clock time,adjusting range is 0~23H,1 hour by one step,long press or 1s will have acceleration function.(No operation within 30s will exit time setting and enter minute setting).
After hour setting is completed,short press ,the minute time “00” flashes(flash by 0.5s),shown as Short press or to adjust minute,adjusting range is 0~59 min,1min by one step,long press or 1s will have acceleration function.
After setting the time,short press to enter week set（No operation within 30s will exit time setting and enters week set）. -
Week setting: To enter week set,the last number flashes（flash by 0.5s),shown as
Short press or to set the week,adjusting range is 1~7 day,1 day by one step,long press or 1s will have acceleration function; 1=Monday,2 =Tuesday, 3=Wednesday, 4=Thursday, 5=Friday, 6=Saturday, 7=Sunday.
After setting up the week,short press to enter weekly program Setting（No operation within 30s will exit week setting and enters weekly program setting） -
Weekly setting: To enter weekly program,shown as Short press can view the Setting for the rest of the week,timeline shows（ ）indicates that the current period is heating ,timeline shows （blank）indicates that the current period is not heating.The following photo defaults the setting from Monday to Sunday.
Monday to Sunday:Heating status from 5:00- 23:59（Other times are not in the heating state）
After setting Monday ,short press to enter Tuesday,until Sunday.
After setting day program,short press to enter running state（No operation within 30s will exit day program and enter running state ） -
Weekly program modification: Long press 3s to enter weekly program modification,short press or to set the weekly program,short press indicates that the current period is heating, flash 3s,dark 1s；short press indicates that the current period is not heating, dark 3s,flash 1s,increase 1H by one step,flashes in the setting time,loop setting when rising to 23H.
For example:adjust Monday weekly program in the heating status from 07:00 to 23 :00(not heating at other times).You should long press 3s when controller is in the Monday weekly program(P1) ,then press from 07 :00 to 23 :00,press for other
times,shown as
After adjusting,short press to exit setting and continue day program（No operation within 30s will automatically exit weekly program modification） -
Running state: Running state will show the setting time, timing mode shows controller is in the weekly program .When the current time is in working state, will be on for 3 seconds and off for 1 second；when not working, will be off for 3 seconds and on for 1 second.If the product is in working state, the heating icon lights up.
For example: the current time is 05:08,shown as green arrow
,on for 3 seconds and off for 1 second. -
Child lock : Press and in the boot state at the same time,shown as ,unable to do any operation in child lock mode (except open and close),under child lock,press and 3s at the same time can open the lock.
-
Restore factory Setting: In the boot state,after long press 10s,system will automatically starts to restore the factory Setting,full screen with 3s,then enter shutdown,press to restart the system,the normal temperature in restore factory
Setting is 50℃, heating time is 2 hours,time shown as”12:00″, week shown as”1″.
Exception code description
| Screen display | Possible failure | Solution |
|---|---|---|
| Er | Temperature sensor open circuit or short circuit | Temperature sensor |
failure,change the heating elements or controller