DATALOGIC HS7600 CODiScan Mobile Barcode Scanner Instruction Manual

: June 1, 2024
: DATALOGIC

Table of Contents

DATALOGIC HS7600 CODiScan Mobile Barcode Scanner
Product Information
Product Usage Instructions
FAQ
HAND TRIGGER & LANYARD
CODISCAN ACCESSORIES
PARTS OF THE GLOVE
USING THE HAND TRIGGER
MAINTENANCE AND DISPOSAL
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DATALOGIC HS7600 CODiScan Mobile Barcode Scanner

Product Information

Specifications

Brand: Datalogic
Model: CODiScan HS7600
Accessories: Hand Trigger, Lanyard
Country of Origin: Italy

Product Usage Instructions

Before wearing the hand trigger, ensure you have chosen the correct part number for your dominant hand. Follow these steps:

Place the hand trigger on top of your hand and secure it with the closing strap while holding the trigger with your thumb.
Adjust the size using the adjustable straps to fit comfortably.
Position the trigger for easy access with your thumb.

FAQ

Q: Can I wash the fabric of the hand trigger?
A: Yes, the fabric is washable. Remember to remove the trigger and electronic parts before washing.
Q: Can I use the lanyard in both neck and belt configurations?
A: Yes, the lanyard can be used in both ways: worn on the neck or attached to a pocket or belt.
Q: How do I know if I need the right or left-hand trigger?
A: Choose the part number that corresponds to your dominant hand – right-handed users should select the right-hand trigger, and left-handed users should choose the left-hand trigger.

HAND TRIGGER & LANYARD

INSTRUCTION MANUAL

CODiScan Accessories

©2023-2024 Datalogic S.p.A. and/or its affiliates All rights reserved Without limiting the rights under copyright, no part of this documentation may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or for any purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S. and the E.U.

CODISCAN ACCESSORIES

CODiScan HS7600 can be used in standalone mode or in conjunction with the following accessories to extend user comfort:

HT1-HS7600KR: Adjustable Right-Hand Trigger
HT1-HS7600KL: Adjustable Left-Hand Trigger
LH-HS7600: Extensible Lanyard for Neck and Belt

NOTE: The adjustable hand trigger has a different part number for right- and left-handed users. Choose the part number that best suits your needs.

The following spare parts are available for purchase:

HT5-HS7600KR: Adjustable Right-Hand Trigger – 5 Pcs
HT5-HS7600KL: Adjustable Left-Hand Trigger – 5 Pcs
SG5-HS7600KR: Spare Right Fabric – 5 Pcs
SG5-HS7600KL: Spare Left Fabric – 5 Pcs
ST1-HS7600K: Spare Trigger System (No Fabric) – 1 Pc
ST5-HS7600K: Spare Trigger System (No Fabric) – 5 Pcs
SS5-HS7600K: Spare Fabric – Adjustable Strap Only – 5pcs

PARTS OF THE GLOVE

a) Adjustable Straps	d) Closing strap
b) Trigger	e) Washable Fabric
c) Holder

WEARING THE HAND TRIGGER
Before wearing the hand trigger, make sure to choose the right part number whether you are right- or left-handed.
To wear the hand trigger:

Put on the hand trigger on top of your hand and, while holding the trigger in place with the thumb, fasten it using the closing strap.
Adjust the size to comfortably fit your hand using the adjustable straps.
Adjust the position of the trigger to reach it easily with your thumb.

NOTE: After the first time, use only the closing strap to wear the hand trigger.

DATALOGIC-HS7600 -CODiScan-Mobile-Barcode-Scanner-
FIG-3

USING THE HAND TRIGGER

When reading a barcode, press lightly to activate the aiming system, and press fully to activate reading.

MAINTENANCE AND DISPOSAL

The electronic parts are detachable from the fabric to allow:

washing/changing the fabric
changing the trigger
disposing of the different parts

WARNING: Remove the trigger and the electronic parts before washing the fabric.

To remove the holder and the trigger from the fabric, lift the piece of fabric covering the cable as shown below and detach the parts.
To re-assemble the hand trigger, first place the trigger, then the cable under the piece of fabric and lastly the holder.

NOTE: Wash the fabric parts at 30 °C. Air dry.

LANYARD

The LH-HS7600 extensible lanyard can be used in two ways:
Worn on the neck.
Attached to a pocket or a belt by detaching the lanyard from the retractable reel.
The lanyard can be extended for ease of use as shown below.
The LH-HS7600 extensible lanyard also has a safety clip on the back side.
The portable holder can be associated with a type-C USB cable 94A050044 (not included) and/or the power supply 94ACC0196 for charging, firmware updates and device configuration.

REMOVING THE DEVICE FROM THE PORTABLE HOLDER
To remove the device from the portable holder, push the device with your thumb, using your other hand to prevent the device from falling.

NOTE: Push with your thumb perpendicular to the device as shown in the picture below. Do not push diagonally.

All rights reserved. Without limiting the rights under copyright, no part of this documentation may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or for any purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates.
Owners of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and transmit this documentation for the purchaser’s internal business purposes. Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation.
Electronic versions of this document may be downloaded from the Datalogic website (www.datalogic.com). If you visit our website and would like to make comments or suggestions about this or other Datalogic publications, please let us know via the “Contact” page.

Disclaimer
Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however, Datalogic shall not be liable for technical or editorial errors or omissions contained herein, nor for incidental or consequential damages resulting from the use of this material. Datalogic reserves the right to change any specification at any time without prior notice.
Trademarks
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U.