DATALOGIC GWU-HS7600 USB Bluetooth Wi-Fi Connectivity Device Instruction Manual

DATALOGIC GWU-HS7600 USB Bluetooth Wi-Fi Connectivity Device

Datalogic S.r.l.
Via S. Vitalino, 13
40012 Calderara di Reno (BO)
Italia
Telefono: +39 051 3147011
Fax: +39 051 3147205
2024 Datalogic S.p.A. and /or its affiliates.

All rights reserved. Without limiting the rights under copyright, no part of this documentation may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or for any purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates. Owners of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and transmit this documentation for the purchaser’s internal business purposes.

Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation. Electronic versions of this document may be downloaded from the Datalogic website (www.datalogic.com). If you visit our website and would like to make comments or suggestions about this or other Datalogic publications, please let us know via the “Contact” page.

Disclaimer
Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however, Datalogic shall not be liable for technical or editorial errors or omissions contained herein, nor for incidental or consequential damages resulting from the use of this material. Datalogic reserves the right to change any specification at any time without prior notice.

Trademarks
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U. The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Datalogic S.p.A and/or its affiliates are under license.

Patents
See www.patents.datalogic.com for the patent list. See the Regulatory Addendum included with your product for additional regulatory, safety and legal information.

END-USER SOFTWARE LICENSE AGREEMENT (EULA) FOR GATEWAY CONNECT GWU-HS7600
NOTICE TO END USER: BY DOWNLOADING OR INSTALLING THE SOFTWARE, OR BY USING THE DATA LOGIC PRODUCT THAT INCLUDES THIS SOFTWARE, THE END USER CONSENTS TO BE BOUND BY THIS AGREEMENT. IF THE END USER DOES NOT AGREE WITH ALL OF THE TERMS OF THIS AGREEMENT, THEN DATA LOGIC IS NOT WILLING TO LICENSE THE SOFTWARE AND THE END USER IS NOT ALLOWED TO DOWNLOAD, INSTALL OR USE THE SOFTWARE OR THE DATA LOGIC PRODUCT—

This End User License Agreement (“EULA”) is between Datalogic IP Tech S.r.l. having its registered office at Via San Vitalino 13, 40012 Calderara di Reno (Bologna), Italy (“Datalogic”), and you, either an individual or a single entity, (“End User or “You””) who has purchased one or more Gateway GWU-HS7600 (“Datalogic Product”) subject to the terms and conditions provided in any relevant purchase or sale contract.

This EULA applies to the software contained in the Datalogic Product (“Embedded Software”) and to any other software, to the extent applicable, offered as optional application software (“Application Software” that together with “Embedded Software” is herein referred to as “Software”). Any Open Source used in conjunction with the Software is subject to the Open Source licenses are available at the following website: http://www.datalogic.com/oss

Grant of License

• Datalogic grants to End User, a personal, non-exclusive, non-transferable, non-sub-licensable, revocable, limited license to use the Software, solely on the Datalogic Product in which it is embedded or for which it is intended for use, in machine-readable form only, solely for End User’s internal business purposes.
• End Users shall not distribute, sublicense, rent, loan, lease, assign, export, re-export, resell, ship or divert or cause to be exported, re-exported, resold, shipped or diverted, directly or indirectly, the Software under this Agreement. End User shall not, and shall not permit others to (i) modify, translate, decompile, reverse engineer, disassemble, or extract the inner workings of the Software, (ii) copy the functionality of the Datalogic Products; (iii) remove any proprietary notices, marks, labels, or logos from the Datalogic Products; (iv) rent or transfer all or some of the Software to any other party without Datalogic’s prior written consent.
• Title to the Licensed Software shall be and remain with Datalogic or the third party from whom Datalogic has obtained a license right. This Agreement does not grant to End User any intellectual property rights. As used in this Agreement the term “purchase” or its equivalent when applied to the Software shall mean “acquire under license”. End User is not entitled to receipt or use of the source code of any licensed Software.
• Portions of the Datalogic Product are protected by the relevant and applicable patent and copyright laws, international treaty provisions, and other applicable laws. Therefore, the End User must treat the Datalogic Product like any other copyrighted material (e.g., a book or musical recording) except that the End User may make one copy of the Software solely for backup purposes. Unauthorized duplication of the Software constitutes copyright infringement.
• Any use of the Software outside of the conditions set forth herein is strictly prohibited and will be deemed a breach of this Agreement resulting in immediate termination of this Agreement.
• In the event of a breach of this Agreement, Datalogic will be entitled to all available remedies at law or in equity (including but not limited to immediate termination of the license without notice, immediate injunctive relief and repossession of all Datalogic Products).
• Without prejudice of the foregoing, End User grants to Datalogic and its independent accountants or consultants the right to examine End User’s books, records and accounts during End User’s normal business hours to verify compliance with this Agreement. In the event such audit discloses non-compliance with this Agreement, Datalogic shall be entitled to immediately terminate the Agreement, and request the End User to promptly pay all (additional) license fees due and any further damages, if any.

License Fee
License fees shall be due by the End User to Datalogic according to the terms provided in the relevant contract for the purchase of the Datalogic Product.

Termination
Without prejudice to any other rights or remedies Datalogic may have, Datalogic may terminate this Agreement if End User fails to comply with the terms and conditions of this Agreement. Datalogic may terminate this Agreement by offering you a superseding Agreement for the Software or any replacement or modified version of or upgrade to the Software and conditioning your continued use of the Software or such replacement, modified or upgraded version on your acceptance of such superseding Agreement. In addition, either party may terminate this Agreement at any time.

Subject to the foregoing, termination shall be effective upon notice to the other party. If this agreement terminates for any reason, the End User’s license to use the Software will immediately terminate, and the End User must immediately stop using the Software, destroy all copies of the Software and all of its parts, and, upon request, provide an affidavit certifying your compliance with the foregoing. The provisions of Sub-sections 1.2, 1.3, 1.4, 1.5, 4, 5, 6, 8, and 12 shall survive termination of this Agreement.

Limited Warranty

Datalogic warrants that, under normal use and operation, the Software will conform substantially to the applicable Datalogic Product documentation for the period specified in the same provided that The software is used with the Datalogic Product. Datalog ic’s entire liability and the End User’s sole and exclusive remedy for any breach of the foregoing limited warranty will be, at Datalog ic’s option, the provision of a downloadable patch or replacement software. Datalogic does not warrant (i) that Software will meet End User’s requirements; (ii) that Software will be uninterrupted or defect error-free; (iii) any non-conformity derived from unauthorized use, and/or improper installation or repair not in compliance with Datalogic Product documentation. End The user agrees that the existence of such non-conformities or errors and Datalog ic’s inability to remedy such errors shall not constitute a breach of this Agreement.

EXCEPT AS PROVIDED IN THIS AGREEMENT, THE DATA LOGIC PRODUCT IS PROVIDED “AS IS” AND DATALOGIC MAKES NO WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, WRITTEN OR ORAL, WITH RESPECT TO THE DATA LOGIC PRODUCT OR SOFTWARE, AND SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Limitation of Liability
EXCEPT AS PROVIDED IN THIS AGREEMENT, NEITHER DATALOGIC NOR ITS LICENSORS SHALL BE LIABLE FOR ANY CLAIMS AGAINST THE END USER BY ANY OTHER PARTY. IN NO EVENT SHALL DATALOG IC’S
LIABILITY FOR DAMAGES, IF ANY, WHETHER BASED UPON CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, STRICT LIABILITY, WARRANTY, OR ANY OTHER BASIS, EXCEED THE PRICE OR FEE PAID BY END USER FOR THE DATALOGIC PRODUCT. UNDER NO CIRCUMSTANCES SHALL DATA LOGIC OR ITS LICENSORS BE LIABLE TO END USER OR ANY THIRD PARTY FOR LOST PROFITS, LOST DATA, INTERRUPTION OF BUSINESS OR SERVICE, OR FOR ANY OTHER SPECIAL, CONSEQUENTIAL, CONTINGENT, INDIRECT, INCIDENTAL, PUNITIVE, EXEMPLARY, OR OTHER SIMILAR DAMAGES, EVEN IF DATA LOGIC OR ITS LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END USER MUST BRING ANY ACTION UNDER THIS AGREEMENT WITHIN 12 (TWELVE) MONTHS AFTER THE CAUSE OF ACTION ARISES.

Indemnification
To the maximum extent permitted by law, the End User agrees to defend, indemnify and hold harmless Datalogic, its affiliates and their respective directors, officers, employees and agents from and against any claims, actions, suits or proceedings, as well as any losses, liabilities, damages, costs and expenses (including reasonable attorney’s fees) arising out of or accruing from or related to the Licensee’s failure to comply with the terms of this Agreement, including but not limited to non-compliance with any applicable laws or regulations with Datalogic product documentation, unauthorized use or disclosure of Software, and (3) use of Software in combination with software, hardware, systems, or other items not provided by Datalogic.

Support
End Users may request support for Software from Datalogic at Datalog ic’s standard support fees and under Datalog ic’s standard support terms and conditions in effect at the time the support is requested.

Government Restricted Rights; International Use

• Use, duplication, or disclosure of the Software by the U.S. Government is subject to the restrictions for computer software developed at private expense as outlined in the U.S. Federal Acquisition Regulations at FAR 52.227-14(g), or 52.227-19 or in the Rights in Technical
• Data and Computer Software clause at DFARS 252.227-7013(c)(1)(ii), whichever is applicable.
• If the End User is using the Datalogic Product outside of the United States, the End User must comply with the applicable local laws of the country in which the Datalogic Product is used and with U.S. export control laws, Without prejudice of the foregoing, the End User agrees to not export or re-export the Software, any part thereof, or any process or service that is the direct product of the Software to any country, person or entity subject to U.S. export restrictions.

End User specifically agrees not to export or re-export any of the Software: (i) to any country to which the U.S. has embargoed or restricted the export of goods or services or to any national of any such country, wherever located, who intends to transmit or transport the Software back to such country; (ii) to any person or entity who you know or have reason to know will utilize the Software in the design, development or production of nuclear, chemical or biological weapons; or (iii) to any person or entity who has been prohibited from participating in U.S. export transactions by any federal agency of the U.S. government. End User warrants and represents that neither the U.S. Commerce Department, Bureau of Export Administration nor any other U.S. federal agency has suspended, revoked or denied its export privileges.

Third-Party Software
The Datalogic Product may contain one or more items of third-party software whose use is governed by a separate third-party license unless otherwise stated.

Open Source Software
Portions of the Software include or operate with Open Source Software (“Open Source Software”). Open Source Software is software covered by a publicly available license governed solely under Copyright law, whereas the complete terms and obligations of such license attach to a licensee solely through the act of copying, using and/or distributing the licensed software, such obligations often include one or more of attribution obligations, distribution obligations, copyleft obligations, and intellectual property encumbrances.

The use of any Open Source Software is subject to the terms and conditions of this Agreement as well as the terms and conditions of the corresponding license of each Open Source Software package. If there is a conflict between the terms and conditions of this Agreement and the terms and conditions of the Open Source Software license, the applicable Open Source Software license will take precedence. Datalogic is required to reproduce the software licenses, acknowledgments and copyright notices as provided by the authors and owners, thus, all such information is provided in its native language form, without modification or translation. Please reference and review the above-mentioned information to identify which Open Source Software packages have source code provided or available.

Notices
All notices required or authorized under this Agreement shall be given in writing and shall be effective when received, with evidence of receipt. Notices to Datalogic shall be sent to the attention of
Datalogic IP Tech S.r.l., Legal & IP Department, Via San Vitalino 13, 40012 Calderara di Reno (Bologna), Italy, or such other address as may be specified by Datalogic in writing.

General Provisions

• Entire Agreement; Amendment. This document contains the entire agreement between the parties relating to the use of the Datalogic Products and the licensing of the Software and supersedes all prior or contemporaneous agreements, written or oral, between the parties concerning the use of the Datalogic Products and licensing of the Software. This Agreement may not be changed, amended, or modified except by written document signed by Datalogic.
• Waiver. A party’s failure to enforce any of the terms and conditions of this Agreement shall not prevent the party’s later enforcement of such terms and conditions.
• Governing Law; Venue: End User agrees to the application of the laws of the country in which End User obtained the license to govern, interpret, and enforce all of End User’s and Datalogic’s respective rights, duties, and obligations arising from, or relating in any manner to, the subject matter of this Agreement, without regard to conflict of law principles. The United
• Nations Convention on Contracts for the International Sale of Goods does not apply. All rights, duties, and obligations are subject to the courts of the country in which the End User obtained the license. For licenses granted by a Licensee who operates in the countries specified below, the following terms apply.

For Americas
This Agreement is governed by the laws of the State of Oregon. This Agreement and the rights of the parties hereunder shall be governed by and construed by the laws of the State of Oregon U.S.A., without regard to the rules governing conflicts of law. The state or federal courts of the State of Oregon located in either Multnomah or Lane counties shall have exclusive jurisdiction over all matters regarding this Agreement, except that Datalogic shall have the right, at its absolute discretion, to initiate proceedings in the courts of any other state, country, or territory in which End User resides, or in which any of End User’s assets are located. In the event an action is brought to enforce the terms and conditions of this Agreement, the prevailing party shall be entitled to reasonable attorneys’ fees, both at trial and on appeal.

For Europe, Middle East and Africa
This Agreement is governed by the laws of Italy. This Agreement and the rights of the parties hereunder shall be governed by and construed by the laws of Italy, without regard to the rules governing conflicts of law. Italian Court of Bologna shall have exclusive jurisdiction over all matters regarding this Agreement, except that Datalogic shall have the right, at its absolute discretion, to initiate proceedings in the courts of any other state, country, or territory in which End User resides, or in which any of End User’s assets are located. In the event an action is brought to enforce the terms and conditions of this Agreement, the prevailing party shall be entitled to reasonable attorneys’ fees, both at trial and on appeal.

For Asia- Pacific Countries
The validity, interpretation and construction of the Agreement shall be governed by and construed by the Laws of the Republic of Singapore. Parties expressly disclaim the application of the United Nations Convention for International Sale of Goods. Any dispute arising out of or in connection with this contract, including any question regarding its existence, validity or termination, shall be referred to and finally resolved by arbitration administered by the Singapore

International Arbitration Centre (“SIAC”) by the Arbitration
Rules of the Singapore International Arbitration Centre (“SIAC Rules”) for the time being in force, which rules are deemed to be incorporated by reference in this clause. The seat of the arbitration shall be Singapore. The number of arbitrators will be three, with each side of the dispute being entitled to appoint one arbitrator. The two arbitrators appointed by the parties will appoint a third arbitrator who will act as chairman of the proceedings. Vacancies in the post of chairman will be filled by the president of the SIAC.

Other vacancies will be filled by the respective nominating party. Proceedings will continue from the stage they were at when the vacancy occurred. If one of the parties refuses or otherwise fails to appoint an arbitrator within 30 days of the date the other party appoints it, the first appointed arbitrator will be the sole arbitrator, provided that the arbitrator was validly and properly appointed. All proceedings will be conducted, including all documents presented in such proceedings, in the English language. The English language version of these terms and conditions prevails over any other language version. Attorneys’ Fees. In the event, an action is brought to enforce the terms and conditions of this Agreement, the prevailing party shall be entitled to reasonable attorneys’ fees, both at trial and on appeal.

Software Product Policy
Datalogic reserves the right to ship its products with the latest version of software/firmware available. This provides our customers with the very latest in Datalogic software technology. The only exception to this policy is when the buyer has a signed contract with Datalogic that clearly defines the terms and conditions for making software/ firmware changes in products shipped to the buyer. To arrange for a Software Maintenance and Support Agreement please contact your Datalogic sales person.

GWU-HS7600 GATEWAY CONNECT USING THE GWU-HS7600 GATEWAY
The Gateway Connect is an accessory that communicates with the CODiScan™ via Bluetooth.

• Customers can manage up to 7 devices with one gateway.
• Gateway Connect communicates in a secure way to pair and configure the device and let it communicate with a host:
• via USB to a fixed or vehicle-mounted computer
• via Wi-Fi to send data to a cloud.
• The Wi-Fi capabilities of the gateway can be also exploited by Powerscan PBT9600.
• The label on the gateway has LED indicators that signal the GWU-HS7600 status, as explained in the table below:

Table 1. LED indicators

Solid GREEN

| |
Send data to hosta| GREEN flash| |
At least 1 scanner linked| | Solid GREEN|

Max nr of linked scanner reached

| | 4x Blinking RED

(250ms ON – 250ms OFF)

After that, Solid GREEN

|
Receiving data from scanners| | GREEN flash|

Config alignment

| | Blinking GREEN

(250ms ON – 250ms OFF)

|
STATUS| LED1 (USB)| LED2 (SCANNER)| LED3 (CLOUD)
---|---|---|---
Reader disabled by host| | Blinking GREEN

(100ms ON – 900ms OFF)

|
Host download/ Firmware upgrade (upload and store)| Blinking GREEN (250ms ON – 250ms

OFF)

| Blinking GREEN

(250ms ON – 250ms OFF)

|
Wi-Fi module fw upgrade| | | Blinking YELLOW

(100ms ON – 100ms OFF)

Transmission Error to Host/USB Suspend|

No effect

|

No effect

|

No effect

Gateway connecting to Wi-Fib| | | Blinking YELLOW

(250ms ON – 250ms OFF)

Gateway connected to an AP| | | Solid YELLOW
Gateway connecting to cloudc| | | Blinking GREEN

(250ms ON – 250ms OFF)

Gateway connected to cloudd| | | Solid BLUE
Gateway sending or receiving data over cloud| | |

BLUE flash

• Only for USB cable transmission
• When Wi-Fi is enabled, the continuous yellow flash on LED3 indicates the gateway is about to connect to an AP or an unreachable AP (AP powered down, out of range or badly configured).
• A gateway properly configured should continuously attempt to establish the AP connection until the configured AP becomes available again.
• The gateway is attempting to establish a connection to a configured MQTT broker or a WebSocket server.
• Connection to the MQTT broker or the WebSocket server (whatever is configured) has been correctly established.

INSTALLATION

To set up your GWU-HS700 Gateway you must:

1. Physically install it.
2. Make all system connections.
3. Configure it.

PACKAGE CONTENTS
The Gateway package contains the following items:

• GWU-HS7600 Gateway Connect
• Wall/desk mounting kit including screws and hook and loop tape

MOUNTING INSTRUCTIONS
The gateway can be either set on or mounted to a flat surface for desktop usage, or affixed vertically to a wall.

PERMANENT MOUNTING
For either desktop or wall mounting, the gateway can be fastened directly to a flat surface using screws or fixing the hook and loop tape included with the product.
NOTE: For vertical installation, do not exceed two meters in height.

Figure 1 – Screw position

**Figure 2 – Hook and Loop Tape

**

SYSTEM CONNECTIONS
The connection of the GWU-HS7600 Gateway can be done either via USB or Wi-Fi interface.

USB
When using a USB connection, a USB host is needed to power and communicate with the Gateway.

Figure 3. Connection via USB

Wi-Fi
When connecting via Wi-Fi, the Gateway can be powered either via a USB host or an external power supply (5V).

Figure 4. Wi-Fi – Host supply

Figure 5. Wi-Fi – External power supply

Recommended Cables

Disconnecting the USB Cable and Resetting the Gateway
To remove the USB cable, first locate the hole on the back of the gateway. Next, either use the hook provided in the mounting kit or take a paper clip and modify it as shown in the figure below. Insert the end of the hook/paper clip into the hole and press it to push on the clip that holds the connector. As you apply pressure, pull out the cable.

CABLE PART NUMBER
USB Cable 90A052258 External power supply 94ACC0196 + 90A052258
NOTE: Disconnecting and reconnecting the USB cable will automatically reset the Gateway.

Find-me and Firmware Updates
To activate the “Find-me” feature, which makes the connected devices beep, first locate the correct hole on the back of the gateway. Next, use the hook provided in the mounting kit or take a paper clip and modify it as shown in the figure below. Insert the end of the hook/paper clip into the hole and push the button.

Figure 6. Find-me

To finalize the firmware update following the Aladdin procedure, use a device linked to the gateway to read the label shown on Aladdin, or follow these steps when the message below is shown on Aladdin:

1. Disconnect the USB cable to reset the gateway
2. Use a modified clip to press the button shown in the picture while re-connecting the USB cable (as shown in Figure 7).
3. It is also possible to update the devices connected to the Gateway by choosing the specific firmware.

NOTE
Don’t link new devices and don’t unlink the connected devices during the update.

Figure 7. Firmware Update

CONFIGURATION

GWU-HS7600 configuration can be performed using the Datalogic Aladdin software configuration program or by reading configuration bar codes with the reader.

Datalogic Aladdin™
Datalogic Aladdin™ (available for free download from the Datalogic website) is a multi-platform utility program that provides a quick and user-friendly configuration method via the RS232/USB-COM or Ethernet interface. It also allows upgrading the software of the connected device (see the Datalogic Aladdin™ Help On-Line for more details).

Configuration Bar Codes
Link the gateway and the reader by simply reading the barcode printed on top of the gateway (connection label). Once the pairing is complete, you can configure the gateway by reading the configuration bar codes, with a CODiScan HS7600 only, on Aladdin™ or in the device manual.

GWU-HS7600 CLOUD SETUP

Access Point Configuration
The GWU-HS7600 operates as a Wi-Fi station IEEE 802.11b/g/n 2.4 GHz and supports the following secure connections:

• WPA2/WPA3 Personal
• WPA2 Enterprise PEAP, TLS and TTLS

The following sections describe how to set up a Wi-Fi connection using the Datalogic Aladdin software configurator. Please use the latest version of Aladdin available for download from https://www.datalogic.com/page/search search_txt=aladdin. Take care to install also the USB_COM driver provided with the Aladdin setup. For clarity, the device is assumed in its default configuration and connected to a free USB port, with a linked scanner (see related section). If the linked scanner is a PBT9600 follow the section “Aladdin Force Connection – Wi-Fi Enable” on page 11; if the linked scanner is a CODiScan, jump to the section “Wi-Fi Interface

• Enable with a CODiScan” on page 13.
• Aladdin Force Connection – Wi-Fi Enable
• Click on the Tools/Settings drop-down menu and select Force Device Connection (Figure 8)
• Figure 8. Aladdin Force Connection

A window with a barcode appears (Figure 9). Scan the barcode with the linked scanner and wait for the USB-HID port connection to appear, then click to Connect Device to enable the configuration menu of the GWU-HS7600 (Figure 10). Now the Wi-Fi interface can be enabled by choosing Interface Selection and setting the communication interface as “WIFI STD” (Figure 11). Click yes in the confirmation window asking to activate immediately the interface change.

Figure 9. Aladdin Force Connection

Figure 10. Aladdin Force Connection

Figure 11. Aladdin Force Connection

Wi-Fi Interface Enable with a CODiScan
If a CODiScan scanner is linked to the GWU-HS7600, to enable the Wi-Fi interface scan the barcode below.

Wi-Fi Interface Enable
Access Point Configuration
Assuming the GWU-HS7600 has the Wi-Fi interface already enabled and connected to a free USB port, open Aladdin and verify the device is properly recognized (Figure 12). Click on the device to open the configuration, expand the
Interface Selection sub-menu on the left and select Wi-Fi parameters (Figure 13). In this section it is possible to enter the credentials of the access point. Figure 12. Access Point Configuration

Figure 13. Access Point Configuration

Service Configuration

The GWU-HS7600 can be configured as a WebSocket client or a MQTT client. To configure the proper service, configure the Service Type then open the related sub-menu to enter the proper service configuration (). It is also possible to configure up to 3 NTP servers in section SNTP. Figure 14. Service Configuration

Certificates
At the bottom of the configuration menu on the left, there’s a section dedicated to the certificate configuration for MQTT, HTTPS and WPA2 Enterprise.

TECHNICAL SPECIFICATIONS

The following table contains Physical and Performance Characteristics, User Environment and Regulatory information.

PHYSICAL CHARACTERISTICS

Color| Black

Dimensions

| Height: 3 cm (1.18”)

Length: 13.5 cm (5.31”)

Width: 5 cm (1.96”) Weight: 80g (2.82 oz)

ELECTRICAL CHARACTERISTICS
Supply Voltage| 5VDC +/-5%
Power Consumption| max. 300 mA
Indicators| See Table 1 on page 1
ENVIRONMENTAL CHARACTERISTICS
Working Temperature| -20° to +50 °C / -4 to +122 °F
Storage Temperature| -40° to +60 °C / -40 to +140 °F
Humidity| 90% non condensing
Protection Class| IP40
Regulatory| See Regulatory Addendum
BT CHARACTERISTICS

Frequency working center| 2400 to 2483.5 MHz
Typical Range (in open air)| 100 m
Max number of devices per base station| 7
CLOUD PARAMETERS
MQTT Length| Max Scancode Length 1450
Websocket Length| Max Scancode Length 2048
Scancode Dataformat| Base64

Available JSON tags

| api_version :

client_serial:

encoding : (is the encoding of the scan_code content, fixed to base64 string)

scan_code :

---|---

TECHNICAL SUPPORT
Support Through the Website
Datalogic provides several services as well as technical support through its website. Log on to (www.datalogic.com).For quick access, from the home page click on the search icon, and type in the name of the product you’re looking for. This allows you access to download Data Sheets, Manuals, Software & Utilities, and Drawings. Hover over the Support & Service menu for access to Services and Technical Support.

Reseller Technical Support
An excellent source for technical assistance and information is an authorized Datalogic reseller. A reseller is acquainted with specific types of businesses, application software, and computer systems and can provide individualized assistance.

WARRANTY

Datalogic warrants that the Products shall be free from defects in materials and workmanship under normal and proper use during the Warranty Period. Products are sold based on specifications applicable at the time of manufacture and Datalogic has no obligation to modify or update Products once sold. The Warranty Period shall be one year from the date of shipment by Datalogic unless otherwise agreed in an applicable writing by Datalogic. Datalogic will not be liable under the warranty if the Product has been exposed or subjected to any:

(1) maintenance, repair, installation, handling, packaging, transportation, storage, operation or use that is improper or otherwise not in compliance with Datalog ic’s instruction; (2) Product alteration, modification or repair by anyone other than Datalogic or those specifically authorized by Datalogic; (3) accident, contamination, foreign object damage, abuse, neglect or negligence after shipment to Buyer; (4) damage caused by failure of a Datalogic-supplied product not under warranty or by any hardware or software not supplied by Datalogic; (5)any device on which the warranty void seal has been altered, tampered with, or is missing; (6) any defect or damage caused by a natural or manmade disaster such as but not limited to fire, water damage, floods, other natural disasters, vandalism or abusive events that would cause internal and external component damage or destruction of the whole unit, consumable items; (7) use of counterfeit or replacement parts that are neither manufactured nor approved by Datalogic for use in Datalogic-manufactured Products; (8) any damage or malfunctioning caused by non-restoring action as firmware or software upgrades, software or hardware reconfigurations etc.; (9) loss of data; (10) any consumable or equivalent (e.g. cables, power supply, batteries, etc.); or (11) any device on which the serial number is missing or not recognizable.

THE DATA LOGIC WARRANTIES ARE EXCLUSIVE AND INSTEAD OF ALL OTHER WARRANTIES, WHETHER WRITTEN, EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE. DATALOGIC SHALL NOT BE LIABLE FOR ANY DAMAGES SUSTAINED BY THE BUYER ARISING FROM DELAYS IN THE REPLACEMENT OR REPAIR OF PRODUCTS UNDER THE ABOVE. THE REMEDY OUTLINED IN THE WARRANTY STATEMENT IS THE BUYER’S SOLE AND EXCLUSIVE REMEDY FOR WARRANTY CLAIMS.

NO EXTENSION OF THIS WARRANTY WILL BE BINDING UPON DATALOGIC UNLESS OUTLINED IN WRITING AND SIGNED BY DATALOGIC’S AUTHORIZED REPRESENTATIVE. DATALOG IC’S LIABILITY FOR DAMAGES ON ACCOUNT OF A CLAIMED DEFECT IN ANY PRODUCT DELIVERED BY DATA LOGIC SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT ON WHICH THE CLAIM IS BASED. DATALOGIC SHALL NOT BE LIABLE FOR DAMAGES RELATING TO ANY INSTRUMENT, EQUIPMENT, OR APPARATUS WITH WHICH THE PRODUCT SOLD UNDER THIS AGREEMENT IS USED. Further details on warranty coverage, rights and conditions are addressed under and regulated by the Terms and Conditions of Sales of Datalogic available at https://www.datalogic.com/terms_conditions_sales.

2024 Datalogic S.p.A. and /or its affiliates. All rights reserved Without limiting the rights under copyright, no part of this documentation may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or for any purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S. and the E.U.

Datalogic S.r.l.
Via S. Vitalino, 13 | 40012 Calderara di Reno | Bologna – Italy
Tel. +39 051 3147011 | Fax +39 051 3147205

References

• Logic.com ™
• Datalogic | Automatic Data Capture and Industrial Automation - Datalogic
• Login to Datalogic OSS
• Patents - Datalogic
• Datalogic | Search - Datalogic

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>