BOSCH Kiox 300 BHU3600 Head Bikes Smart Display Instruction Manual
- June 9, 2024
- Bosch
Table of Contents
BOSCH Kiox 300 BHU3600 Head Bikes Smart Display
Safety instructions
Read all the safety information and instructions. Failure to observe the safety in-formation and follow instructions may result in electric shock, fire and/or serious injury.
Save all safety warnings and instructions for future reference.
The term battery is used in these instructions to mean all original Bosch
eBike rechargeable battery packs.
- Read and observe the safety warnings and directions contained in all the eBike system operating instructions and in the operating instructions of your eBike.
- Do not attempt to secure the display or operating unit while riding.
- Do not allow yourself to be distracted by the on-board computer’s display. If you do not focus exclusively on the traffic, you risk being involved in an accident. If you want to make entries in your on-board computer other than switching the assistance level, stop and enter the ap-propriate data.
- Do not use your smartphone while riding. If you do not focus exclusively on the traffic, you risk being involved in an accident. Only enter the relevant data having stopped first.
- Set the display brightness so that you can adequately see important information such as speed and warning symbols. Incorrectly set display brightness may lead to dangerous situations.
- Do not open the on-board computer. Opening the on-board computer may damage it beyond repair and void any warranty claims.
- Do not use the on-board computer as a handle. Lifting the eBike up by the on-board computer can cause irreparable damage to the on-board computer.
- Do not stand your bicycle upside down on its saddle and handlebars if the on-board computer or its holder protrude from the handlebars. This may irreparably damage the on-board computer or the holder. Also re-move the on-board computer before placing the bicycle on a wall mount to ensure that the on-board computer does not fall off or become damaged.
Privacy notice
If the on-board computer is sent to Bosch Service because it requires
servicing, the data stored on the on-board com-puter may be transmitted to
Bosch.
Product description and specifications
Intended use
The Kiox 300 on-board computer is designed to display cycling data.
To access the full functionality of the Kiox 300 on-board computer, you will
need a compatible smartphone installed with the eBike Flow app (available from
the Apple App Store or the Google Play Store).
Product features
The numbering of the components shown refers to the illus-trations on the graphics pages at the beginning of the manual.
- Display
- Cable outlet
- Removal blocker
- Snap-in hook
- Adapter tray
- Display contacts
- Holder contacts
- Display mount
- Display mount fastening screw
- Bridge for retaining strapa)
a) The retaining strap is not included in the scope of delivery.
Technical data
A) Temperatures outside of this range may cause faults in the display.
The license information for the product can be accessed at the following
Internet address: https://www.bosch-ebike.com/licences
Assembly
Fitting and Removing the Display (see figure A)
To fit the display (1), attach the display
(1) to the front edge of the display mount (8) in the direction of travel, on
the snap-in hook (4) ❶ and press the rear side of the display (1) on the
display mount (8) ❷.
To remove the display (1), pull the display (1) towards you
until you are able to lift off the display (1) ❷.
A retaining strap can be secured to the bridge (10). Note: The eBike system
will switch off if you are riding at un-der 3 km/h and remove the on-board
computer from its holder. This does not apply to eBikes with assistance up to
45 km/h.
Inserting the Removal Blocker (see figure B)
Note: Depending on the design/mounting of the display mount, it may not
be possible to insert the removal blocker. The display must be mounted.
Insert the removal blocker (3) into the adapter tray (5) from below until you
hear the removal blocker (3) click into place. From this point onwards, you
can no longer lift off the dis-play (1) from the display fixture (8) without
removing the display mount (8) from the adapter tray (5) by loosening the two
fastening screws (9).
Note: The removal blocker (3) is not an anti-theft device.
Operation
The displays are operated and the indicators are controlled via a control
unit.
The meaning of the buttons on the operating unit for the dis-play indicators
can be found in the following overview. De-pending on how long it is pressed
for, the select button has two functions.
- < Scroll to the left
-
Scroll to the right
- + Scroll up
- – Scroll down
- Change to the second page level (press briefly)
- • Open the settings menu on the status page (press briefly)
- • Open page-related options
e.g.(press and hold > 1 s)
Please note: All screenshots showing the display and text on the following pages are from the approved software ver-sion. The display and/or text may change slightly following a software update.
Status page
From the start page, you can access the status page by pressing the button.
- a Battery charge
- b Assistance level
- c Bicycle lights
- d Time
- e Connection indicator
- f Smartphone connection
- g Connection status
- h Settings Menu
You can access the settings menu from this page by pressing the button.
Note: The settings menu cannot be called up while riding.
The
-
< My eBike>
You can find the following menu items here.-
< Range reset>
The value for the range can be reset here. -
< Auto trip reset>
The settings for automatic reset can be adjusted here.
The value of the wheel circumference can be adjusted or reset to the standard setting here. -
< Service>
The next service date is shown here, provided that it has been set by the bicycle dealer. -
< Components>
The components used with their version numbers are displayed here.
-
-
< My Kiox>
You can find the following menu items here.-
< Statusbar>
You can choose between the, -
< Language>
You can select your preferred system language here. -
< Units>
You can choose between metric or imperial measure-ments here. -
< Time>
You can set the time here. -
< Time format>
You can select one of the two time formats here. -
< Brightness>
You can set the display brightness here. -
< Settings reset>
You can reset all of the system settings to the default values here.
-
-
Under the
menu item, you will find the contact details ( ) and certificates ( ).
You can leave the settings menu by pressing the • button or the < button.
Press the > button to access the start page.
Start page
If you did not select another page before the last time you switched off, you
will be shown this page.
- a Battery charge
- b Assistance level
- c Bicycle lights
- i Unit of speed indicator
- j Indicator name
- k Your performance
- l Speed
- m Motor output
The a … c indicators form the status bar and are shown on every page.
You can use the < button to change from this page to the status page or press
the button > to access additional pages. The statistical data, battery range
and average values are displayed on these pages.
From each of these pages, you can access the second level of data by pressing
the • button.
If the user is on a different page to the start page when they switch off, the
most recently displayed page will appear again when the eBike is switched on.
Pressing and holding the • select button enables you to re-set the statistical
data for your journey or excursion (not on the
Maintenance and servicing
Maintenance and cleaning
Do not clean any of the components with pressurized water.
Keep the screen of your on-board computer clean. Dirt can cause faulty
brightness detection.
Clean your on-board computer using a soft cloth dampened only with water. Do
not use cleaning products of any kind.
Have your eBike system checked by an expert at least once a year (including
mechanical parts, up-to-dateness of system software).
In addition, the bicycle dealer may base the service date on the distance
travelled and/or on a period of time. In this case, the on-board computer
displays a message telling you when the service date is due each time it is
switched on.
Please have your eBike serviced and repaired by an authorised bicycle dealer.
- Have all repairs performed only by an authorized bike dealer.
Note: If you are handing in your eBike to a bicycle dealer for
maintenance, it is recommended that you temporarily deactivate the <eBike
Lock> and
After-sales service and advice on using products
If you have any questions about the eBike system and its components, contact
an authorized bicycle dealer.
For contact details of authorized bike dealerships, please visit www.bosch-
ebike.com.
Transport
- If you transport your eBike attached to the outside of your car, e.g. on a bike rack, remove the on-board computer and the eBike battery to avoid damaging them.
Disposal
The drive unit, on-board computer incl.
operating unit, battery, speed sensor, accessories and packaging should be
disposed of in an environmentally correct manner.
Check that your personal data has been deleted from the device.
Do not dispose of eBikes and their components with house-hold waste.
In accordance with Directive 2012/19/EU and
Directive 2006/66/EC respectively, electronic devices that are no longer
usable and defective/drained batteries must be collected separately and
recycled in an environmentally friendly manner.
Please return Bosch eBike components that are no longer usable free of charge
to an authorised bicycle dealer or to a recycling facility.
Subject to change without notice.
Documents / Resources
|
BOSCH Kiox 300 BHU3600 Head Bikes Smart
Display
[pdf] Instruction Manual
Kiox 300, Kiox 300 BHU3600 Head Bikes Smart Display, Kiox 300 BHU3600, Head
Bikes Smart Display, Smart Display, Display
---|---
References
- Bosch eBike Systems | Premium eBike systems & smart features - Bosch eBike Systems
- Licences Products - Bosch eBike Systems
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>