Baseus Security P1 Pro Indoor Camera User Manual
- August 6, 2024
- Baseus
Table of Contents
Baseus Security P1 Pro Indoor Camera User Manual
PRODUCT SPECIFICATIONS
- Power input : 5 V=1 A
- Resolution : 2880 X 1620
- Storage : microSD card (up to 256 GB)
- Working temperature : -10°C to +40°C
PRODUCT APPEARANCE
- Indicator light
- Microphone
- Speaker
- USB-C charging port
- Reset button
- Micro SD/TF card slot
PACKAGE INCLUDING
- Camera ×1
- Installation base ×1
- Expansion screw ×2
- Charging cable (USB-A to USB-C) ×1
- Quick Start Guide ×1
SETUP INSTRUCTIONS
- Download and install the baseus Security App, and register an account.
- Plug the charging cable into the USB-C charging port on the back of the camera. The camera will automatically turn on and the indicator light will flash red.
- Add the camera by following the instructions on the App.
CAMERA INSTALLATION
Install the camera:
The camera can be placed on a flat surface such as a desk, dining table, or
coffee table, or it can be fixed on the wall.
Mounting the camera on the wall:
- Use a pencil to mark the installation positions on the wall according to the hole spacing on the installation base, and then use a drilling tool to drill two holes with a diameter of 6 mm and depth of 30 mm in the marked positions.
- Insert the expansion sleeves into the drilled holes.
- Align the two holes of the installation base with the holes on the wall, insert the screws through the holes of the installation base, and use a screwdriver to fasten the screws into the expansion sleeves.
- Align the grooves on the bottom of the camera with the protruding parts of the installation base and rotate the camera clockwise to lock it in place.
NOTICE
The device is not a toy.
Choking Hazard :
- The product contains (or comes with) small parts, plastic elements, cables and parts that may cause choking hazard. Keep your camera and its accessories out of the reach of small children. Consult a physician immediately if small parts are swallowed.
- Strangulation Hazard: Children get strangled in cords. Keep cords out of the reach of children (more than 3ft/0.9m away).
- The recommended temperature range for devices and accessories is -10°C to 40°C (14°F to 104°F).
- Unless specitically indicated that it is sate to do so in the user guide or instruction manual, avoid exposing your device to direct sunshine or excessively wet environments. For pluggable equipment, the socket-outlet shall be easily accessible.
- Use only the adapter provided by the manufacturer. Using unauthorized adapters may cause danger and violate the authorized use of the device or the warranty article.
SAFETY
This symbol indicates that this product shall not be treated as household
waste. Instead, it shall be handed over to the applicable collection point for
the recycling of electrical and electronic equipment. Follow local rules and
never dispose of the product with normal household waste.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
For USA: The frequency stability of all transmission frequencies of U-NII-1 and U-NII-3 meets the requirements of 47 CFR FCC Part 15.407(g), and the manufacturer declares that their transmission is maintained at Band U-NII-1 and U-NII-3.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in fixed/mobile exposure condition. The min separation
distance is 20cm.
The following importer is the responsible party (for FCC matters only)
- Company Name : BASEUS TECHNOLOGY (US) INC
- Address : 421 S BROOKHURST ST SUITE 1312 ANAHEIM, CA 92804
- Telephone : +6-145412699
This product complies with the radio interference requirements of the European Community.
Declaration of Conformity
Shenzhen Baseus Technology Co., Ltd. Declares that the product is in
compliance with Directive 2014/53/EU. The full text of the EU Declaration of
Conformity is available at the following internet address:
https://eu.baseus.com/pages/euro-compliance.
RF Exposure Notice
The Maximum Permissible Exposure (MPE) level has been calculated based on a
distance of d=20cm between the device and the human body. To maintain
compliance with RF exposure requirement, use product that maintain a 20cm
distance between the device and human body.
Frequency bands and power are as below:
5150~5350 MHz can be used indoors only.
Warning : Please follow the above safety instructions A there or other injure five, electric shock,
- Manufacturer : Shenzhen Baseus Technology Co., Ltd.
- Add : 2d Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen
- Hotline : +1 800 220 8056
- Website : https://www.baseus.com
- Monday to Friday: 10:00AM-6:00 PM(UTC-5)
- PB5231Z-P0A0
- 0000000000
Designed by Baseus
Made in China
Download PDF:Baseus Security P1 Pro Indoor Camera User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>