Baseus PPBLD100 Blade Laptop Power Bank User Manual

Baseus PPBLD100 Blade Laptop Power Bank User Manual

Product Parameter

• Name: Power Bank
• Model No.: PPBLD100
• Battery: Polymer Lithium Battery
• Capacity : 5000mAh/14.8V/74Wh
• Rated Capacity: 12000mAh（5V 3A）
• Energy Conversion Rate: ≥75%
• Type-C1/C2 Input: 5V 3A,9V 3A,12V 3A,15V 3A,20V 3.25A
• Type-C1/C2 Output: 5V 3A,9V 3A,12V 3A,15V 3A,20V 5A
• USB1/USB2 Output: 4.5V 5A(SCP),5V 4.5A(SCP),5V 3A,9V 3A,12V 2.5A
• Type-C1+Type-C2 Output: 65W+30W
• Type-C1/Type-C2+USB1/USB2 Output: 65W+30W
• USB1+USB2 Output : 5V 3A
• Type-C1+Type-C2+USB1/USB2 Output: 45W+30W+18W
• Total 5V Output: 5V 9A
• Size: L162W134H18mm
• weight: About 490g

Packing List

• Power Bank*1
• User Manual * 1
• Warranty Card *1
• Charging Cable*1
• Storage Bag*1

Product Diagram

• Power Switch
• USB1 Output
• Type-C1 Input/Output
• Type-C2 Input/Output
• USB2 Output

Product Description

• This product is a high-power digital fast-charging power bank with 100W output and 65W input. It has dual input and four outputs, and is compatible with PD3.0, QC4 +, QC3.0, SCP, FCP, Samsung AFC and other fast charging protocols. It features a digital display showing battery level, voltage, current and remaining charging time, as well as multiple safety protection circuits such as over-current, over-voltage, over-temperature and short circuit protection. It can fast charge most laptops and mobile phones.

Instructions for the use of products

Key operation instructions

• In the no-load state, press the key once to display the current remaining power.
• When the product outputs for multiple devices at the same time, the display shows output power, current and remaining charging time of current port in turn.
• When the product inputs and outputs at the same time, only input voltage, current and remaining time are shown.

Note:

• When charging the power bank, the required time to fully charge it is shown.
• When charging a device, the remaining time of power bank is shown.
• Due to the change of charging power, the charging time will change accordingly

Charging operation instructions

• Blade high power digital display fast charging power bank charges laptop or other digital devices
• Check whether the charging voltage of the digital product matches the output voltage of the blade high-power digital display fast charging power bank.
• Select the original charging cable of the digital product, one end is connected with the digital product, and the other end is connected with the output port of the blade high-power digital display fast charging power bank. The blade high-power digital display fast charging power bank will automatically turn on to charge the digital product, and the power indicator is always on.

Charging the blade high power digital display fast charging power bank with charger

• Select the charging line of type-C interface to connect with the input port of type-C of blade high-power digital display fast charging power bank.
• Connect the charging cable to the charger, and the LED power indicator starts to flash, indicating that the blade is charging the high-power digital display fast charging power bank, and the LED light is always on after it is fully charged (For a better charging experience, it is recommended to use it with Baseus 65W or higher power charger.)

Use environment

Use ambient temperature: non-tropical area below 0℃ to 35 ℃.
Storage ambient temperatures: 0 ℃ to 40 ℃ degrees Celsius.

Icon Description

The 5-year icon refers to the “valid environment-friendly use period”, not the product quality assurance period. Electronic products contain toxic and harmful substances such as lead, mercury and cadmium. The overdue use of these products may lead to leakage or mutation of these toxic and harmful substances, and cause environment pollution or serious damage to people and property. The term of “environment-friendly use period” means that all electronic products shall be used within this validity period. We are free of any responsibility against safety issues caused by using the product beyond its safe service life.

Safety warning instructions

• Please read all instructions and warnings before using this product. Non-standard use will damage the product or personal safety.
• Due to the existence of conversion efficiency, so rated output capacity is less than battery capacity.
• When you need to check the power, press the power button once and the LED indicator lights up to show the current power. In the connectionless state, the power will automatically sleep after about 30 seconds.
• Please charge your power bank periodically (at lease one time with 5 months recommended) in order to maintain its long service life.
• Improper use of the product can easily cause damage to the product or may endanger personal and property safety.
• Consumer shall be liable for any personal and property damage resulted from their improper use against the user manual or ignoring the warning, to which our company will not bear any legal liability.
• Disintegration of this product by non-professionals is strictly prohibited.
• Use of household appliances or loads in excess of the output current of this product shall be avoided (no output due to circuit protection).
• Intense physical actions including knocking, throwing, trampling on and squeezing, etc. shall be avoided.

Statement on Toxic and Hazardous Substances in Electronic Information

Products

This form is compiled by SJ/T 11364.

• O: Indicates that contents of the toxic and hazardous substances in all homogeneous materials are below the limit requirements specified by GB/T 26572 standard.
• X : Indicates that contents of the toxic and hazardous substances exceed the limit requirements specified by GB/T 26572 standard in at least one homogeneous material of the component.

FCC Statment

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Shenzhen Times Innovation Technology Co., Ltd.

• Add: 5th Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen
• Executive Standard: GB/T35590-2017
• Hotline: +86-4000-712-711 Website: www.baseus.com

Copyright 2010-2021 Shenzhen Times Innovation Technology Co., Ltd.
All Rights Reserved

PB3098Z
Designed by Baseus
Made in China
The picture is only for reference, please make the object as the standard.

Download PDF:Baseus PPBLD100 Blade Laptop Power Bank User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>