Baseus PPADM30 Digital Display Charge Power Bank User Manual
- August 6, 2024
- Baseus
Table of Contents
- Baseus PPADM30 Digital Display Charge Power Bank User Manual
- Product Specification
- Package Includes
- Product Diagram
- Product Description
- Use Environment
- Icon Description
- Safety Warning Instructions
- Statement on Toxic and Hazardous Substances in Electronic Information
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Baseus PPADM30 Digital Display Charge Power Bank User Manual
Product Specification
- Name: Power Bank
- Model No.: PPADM30
- Battery Type: Polymer Lithium Battery
- Capacity: 10000mAh/7.4V/74Wh
- Rated Capacity: 12000mAh (5V-3A)
- Energy Conversion Rate: ≥ 75%
- Type-C Input: 5V-3A; 9V-3A; 12V-2.5A.
- Type-C Output: 5V=3A; 9V=3A; 12V=2.5A; 15V=2A; 20V=1.5A.
- USB1 Output: 5V=3A; 9V=2A; 12V-1.5A.
- USB2 Output: 5V-2.4A.
- Total Output: 5V-3A.
- Product Size: 156.865.428.8mm
- Product Weight: About 480g
Package Includes
- Power Bank*1
- User Manual * 1
- Warranty Card *1
- Type-C to Type-C Charging Cable*1
Product Diagram
Product Description
This product is a three-output large-capacity fast charging power bank with digital display, which can simultaneously charge 3 devices. It features a digital display to indicate the battery status, a Type-C port with dual-way fast charging, a maximum 30W power output, and supports fast charging for iPad, iPhone, etc. It provides multiple fast charging protocols and has multiple built-in safety protection circuits such as over-current, over- voltage, over-heating, and short-circuit protection.
Use Environment
Working Temperature: Non-tropical area, 0°C to 35 °C
Icon Description
The 5-year icon refers to the “valid environment-friendly use period”, not the product quality assurance period. Electronic products contain toxic and harmful substances such as lead, mercury and cadmium. The overdue use of these products may lead to leakage or mutation of these toxic and harmful substances, cause environment pollution or serious damage to people and property. The term of “environment-friendly use period” means that all electronic products shall be used within this validity period. We are free of any responsibility against safety issues caused by using the product beyond its safe service life.
Safety Warning Instructions
- Please read all instructions and warnings before using this product. Non-standard use will damage the product or personal safety.
- Due to the conversion efficiency, the rated output capacity is less than battery capacity.
- When you need to check the battery status, press the power button once and the LED indicator light will show you the current battery level. In the connectionless state, the power will automatically sleep after about 30 seconds.
- Please charge your power bank periodically (recommending at least once every 5 months ) in order to maintain a long service life.
- Improper use of the product could easily cause damage to the product or may even endanger your personal safety.
- Consumer shall be liable for any personal and property damage resulted from their improper use against the user manual or ignoring the warning tips, to which our company will not bear any legal liability.
- Dismantling of this product by non-professionals is strictly prohibited.
- Use of household appliances or loads in excess of the output current of this product shall be avoided (no output due to circuit protection).
- Intense physical actions including knocking on, throwing, trampling on and intense squeezing, etc. shall be avoided.
Statement on Toxic and Hazardous Substances in Electronic Information
Products
This form is compiled in accordance with SJ/T 11364.
- 0 : Indicates that contents of the toxic and hazardous substances in all homogeneous materials are below the limit requirements specified by GB/T 26572 standard.
- X: Indicates that contents of the toxic and hazardous substances exceed the limit requirements specified by GB/T 26572 standard in at least one homogeneous material of the component.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interterence received, including interterence that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interterence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
- Reorient or relocate the receiving antenna.
- crease the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with the provisions of Directive 2012/19/EU and Directive 2006/66/EU. It is strictly forbidden to dispose of this equipment with ordinary trash; it must be recycled. This symbol indicates that the product shall not be treated as regular domestic trash, and must be delivered to a recycling center that is capable of recycling electronic and electrical equipment. It is hereby declared that PPADM30, a product model of Shenzhen Times Innovation Technology Co., Ltd., complies with the provisions of Directive 2014/30/EU, Directive 2011/65/EU. The full text of the EC Declaration of Conformity can be found on the following website: www.baseus.com
Warning
Please follow the above safety instructions otherwise it may cause fire,
electric shock, damage or other injury.
- Manufacturer: Shenzhen Times Innovation Technology Co., Ltd.
- Add: 5th Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen
- Executive Standard: GB/T 35590-2017
- Hotline: +86-4000-712-711 Website: www.baseus.com
PB3321Z/P0A0
Designed by Baseus
Made in China
The picture is only for reference.
Download PDF:Baseus PPADM30 Digital Display Charge Power Bank User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>