Baseus PPNLD45UC GaN 2 in 1 Power Bank User Manual
- August 6, 2024
- Baseus
Table of Contents
Baseus PPNLD45UC GaN 2 in 1 Power Bank User Manual
Product Parameter
- Name: Power Bank & Quick Charger 10000mAh
- Model: PPNLD45UC
- Input : AC 100-240V~,50/60Hz, 1.5A Max.
- Type-C input : 5V=3 / 9V=2A / 12V=1.5 Max
- Output AC Charging Mode:
- Type-C: 5V=3 / 9V=3A / 12V=3A / 15V=3A / 20V=2.25A Ma
- USB: 4.5V=5A / 5V=4.5A / 9V=3A / 12V=2.5A / 20V=1.5A Max.
- Type-C+USB : 30W+15W
- Power Bank Mode :
- Type-C: 5V=3A / 9V=3A / 12V=2.5A / 15V=2A / 20V=1.5A Max
- USB: 4.5V=5A / 5V=4.5A / 9V=3A / 12V=2.5A / 20V=1.5A Max.
- Type-C+USB: 18W+18W
- Battery capacity: 10000mAh/3.85V/38.5Wh
- Rated capacity: 5800mAh (5V3A)
- Batteries: Li-polymer
- Energy conversion rate: ≥72%
- Size: 1056430mm
- Weight: 280g
Packing list
- Power BankX 1
- User Manual X1
- Warranty card X1
- 3A Cto C Charging Cable X 1
- storage bag X1
Product Description
This product is a two-in-one supercharger with Power bank and charger. It supports two charging modes charger and power bank. The product adopts the new semiconductor material GaN process, which has the characteristics of small size, large power, complete quick charging protocol, etc. The maximum output power of the product can reach 45W in the charger mode, and 30W in the power bank mode, which can be used for quick charging of notebook computers and mobile phones, supporting qc3.0 + pd3.0 dual way quick charging input and output, charging and discharging at the same time, small current output and other functions. When charging and discharging at the same time, the charger outputs the external load first, and then charges the power bank. No matter in daily office or traveling, a device can meet your charging needs.
Operation description
The power button operation instructions
AC Charging Mode:
- When connected to AC, no load or load power ≤ 7W, charge the built-in, the white light will light up to show the current power and start blinking, indicating that the mobile power is being charged.
- When the load power is greater than or equal to 9W, the load will be automatically charged. When the charging power is less than or equal to 7W, the load and the mobile power supply will be charged at the same time until it is fully charged.
- supports PD3.0 + QC3.0 dual quick charge input and output.
Power bank Mode:
- When the mobile power is at rest, press the button once to display the current power. After no load, the lamp will go out after 55, and the output will automatically turn off after 30S.
- Charging your mobile phones or other digital devices
- Check and make sure the charging voltage of your digital products is consistent with the voltage output of product.
- Select and use the original charging cable of your digital products, connect one end of it with your digital product, and the other end with the output port of product. product then automatically starts to charge your digital product, with the LED indicator lit all the time.
Tips
- Due to the existence of conversion efficiency, so rated output capacity is less than battery capacity .
- Depress the power button once, the LED indicator is lit and displays the current battery capacity level, and the power supply can be shut down by a long press on the power button. In case there is no connection, the power bank automatically goes into standby mode by 30 seconds later.
- Please charge your power bank periodically (at lease one time with 5 months recommended) in order to maintain its long service life.
- Improper use of the product can easily cause damage to the product or may endanger personal and property safety.
- Consumer shall be liable for any personal and property damage resulted from their improper use against the user manual or ignoring the warning, to which our company will not bear any legal liability.
- Disintegration of this product by non-professionals is strictly prohibited.
- Use of household appliances or loads in excess of the output current of this product shall be avoided (no output due to circuit protection).
- Intense physical actions including knocking, throwing, trampling on and squeezing, etc. shall be avoided.
Statement on Toxic and Hazardous Substances in Electronic Information
Products
This form is compiled in accordance with SJ/T 11364.
- 0: It indicates that the content of the toxic and harmful substance in all homogeneous materials of the component is below the limit specified in GB/T26572 standard.
- X: The content of toxic and harmful substances in at least one homogeneous material of this part exceeds the limit stipulated in GB/T 26572 standard.
The 5-year icon refers to the “effective life of environmental protection”,
not the product quality assurance period. Electronic products all contain
toxic and harmful substances such as lead, mercury and cadmium. Once they are
overused, toxic and harmful substances may leak or mutate, cause pollution to
the environment, or cause serious damage to people and property. The term of
“environmental protection use” means that all electronic products will be
required to use within this effective period. We will no longer be responsible
for the quality of the products due to the safety risks that arise after the
safe use period.
Warning
Please follow the above safety instructions otherwise it will cause fire,
electric shock, damage or other damage.
Shenzhen Times Innovation Technology Co.,Ltd.
Address: Room 03, 6/F, Building 3, WINLEAD,Fada Road, Bantian
Street,Longgang District, Shenzhen,China
TEL:+86 755-82433603 Hotline:4000-712-711
Download PDF:Baseus PPNLD45UC GaN 2 in 1 Power Bank User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>