Baseus CCCJG30CS Super Si Pro Fast Charger User Manual
- August 6, 2024
- Baseus
Table of Contents
Baseus CCCJG30CS Super Si Pro Fast Charger User Manual
Specifications
- Name: Super Si Pro Quick Charger
- Model No.: CCCJG30CS
- Material: PC
- Input: AC100-240V~, 50/60Hz, 1.2A Max.
- Type-C Output: 5V/9V-3A, 12V-2.5A, 15V-2A, 20V- 1.5A
- USB Output: 5V/9V– 3A, 12V-2.5A, 20V– 1.5A
- Type-C+USB output: 18W+12W
- 18W: 5V-2.4A, 9V- 2A, 12V– 1.5A
- 12W: 5V-2.4A, 9V-1.33A, 12V-1.0A
- Size: 35 x 30 X 48.2mm (Plug not included)
- Net weight: ~ 64g (2.26oz)
Content
- Charger X1
- User manual X 1
- Warranty card X1
Description
This product is a dual-port (Type-C+USB) 30W fast charger using a new type of semiconductor material (Super silicon). The maximum output power of the Type-C single port can reach 30W (20V- 1.5A). It is equipped with Baseus’s leading BPS I| power distribution technology. Both ports are fast charging when used separately. The product supports PD3.0, QC3.0, Apple2.4, BC1.2 and other fast charging protocols, as well as PD fast charging for most mobile phones including new iP phones, and tablets. The product has built-in multiple safety protection circuits such as overcurrent, overvoltage, and temperature protection.
Operating Environment
Use ambient temperature: nontropical area with altitude below 2000m.
Indicates that this product is for indoor use.
Icon Description
The 10-year icon refers to the “valid environment-friendly use period,” not the product quality assurance period. Electronic products contain toxic and harmful substances such as lead, mercury, and cadmium. The overdue use of these products may lead to leakage or mutation of these toxic and harmful substances, cause environmental pollution, or severe damage to people and property. The term “environment-friendly use period” means that all electronic products shall be used within this validity period. We are free of any responsibility against safety issues caused by using the product beyond its safe service life.
Reminder
Please read all Instructionsand Warnings before using this product; improper usage may cause product damages or safety hazards.
- DO NOT keep the product in harsh environments with high temperatures, intense light and strong magnetic field, or near a fire source.
- Improper usage may cause product damages, property damages, or injuries.
- Consumers are liable for any physical and property damage due to any improper use of the product not mentioned herein, and Baseus will not be held liable to any applicable laws.
- DO NOT disassemble or modify this product without a professional’s supervision.
- Use of household appliances or loads in excess of the output current of this product shall be avoided (no output due to circuit protection).
- DO NOT apply any physical force! Including throwing, banging, stumping, or applying pressure.
Warning: Please follow the safety instructions; improper usage may cause fire, electric shock, damage, or injuries.
Statement on Toxic and Hazardous Substances in Electronic Information
Products
This form is compiled in accordance with SJ/T 11364.
- 0: It indicates that the content of the toxic and harmful substances in all homogeneous materials of the component is below the limit specified in GB/T 26572 standard.
- X: The content of toxic and harmful substances in at least one homogeneous material of this part exceeds the limit stipulated in GB/T 26572 standard.
The product complies with EU ROHS 2.0 directive (2011 / 65 / EU) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning
Please follow the above safety instructions otherwise it will cause fire,
electric shock, damage or other damage.
Shenzhen Times Innovation Technology Co., Ltd.
- Add: 5th Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen
- Manufacturer: SHELL ELECTRONIC LIMITED
- Manufacturer address: 2F, BC Building, 3#of shayuan 1st Rd, Keyuancheng, Tangxia Town, 523710 Dongguan City, China
- Hotline: +86-4000-712-711
- Website: www.baseus.com
Designed by Baseus
Made in China
PB3034Z-P1A4
1000057322
Download PDF:Baseus CCCJG30CS Super Si Pro Fast Charger User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>