LINDY DST-Mx USB 3.2 Laptop Docking Station User Manual
- June 3, 2024
- LINDY
Table of Contents
LINDY DST-Mx USB 3.2 Laptop Docking Station
Introduction
Thank you for purchasing the USB 3.2 Type C Mini Dock 2x HDMI 4K. This product has been designed to provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference. This USB 3.2 Type C Mini Dock features all the interfaces needed for a standard workstation making it a great space saving addition to any hot desk environment. By connecting a single USB 3.2 Type C cable to a notebook or Macbook you can quickly access a variety of essential ports, which in turn can be connected to one or two HDMI displays, USB devices, speakers/headset and LAN. The same USB Type C cable is also able to provide power to compatible notebooks using USB Power Delivery. The Mini Dock supports MST (Multi Stream Transport) not only for Windows PCs but also for Apple M1. It enables the connection of two HDMI displays to a laptop or Macbook at resolutions of 3840×2160 60Hz and 3840×2160 30Hz in simultaneous use and allows to mirror your monitor or extend your desktop (showing different content).
Package Contents
- USB 3.2 Type C Mini Dock
- This manual
Specification
- Host Interface: USB 3.2 / 3.1 Gen 1 / 3.0 (Type C)
- Connects one or two HDMI displays to your notebook or Macbook
- Software-based Silicon solution (SM768GX) to connect any display to any computer that supports USB
- Max. resolutions: one display: 3840x2160p@60Hz, 2 displays: 4K60Hz & 4K30Hz
- 2 Port USB 5Gbps Hub Type A (both support BC 1.2 charging)
- 1x USB Type C port for Power Delivery 100W (20V 5A) & data
- Supports Gigabit Ethernet 10/100/1000Mbps
- 1x combo Audio port 3.5mm (1x in, 1x out)
- Compatible with computers with USB 3.2/Thunderbolt 3 Type C interface
Installation
Plug the USB Type C connector of the USB 3.2 Type C Mini Dock into your computer. Then please download the software from the Lindy webshop. It can be found under the corresponding No. 43360. Simply install the driver and then connect the devices to the Mini Dock.
- Displays: Using an appropriate HDMI cable as required, connect your display(s) to the HDMI port(s) on the Mini Dock.
- Ethernet: Use a standard RJ45 Ethernet cable to connect the Dock to your network.
- USB Type A: Up to two USB devices can be connected to the Docking Station using a USB Type A cable; both USB Type A ports supports BC 1.2 standard for faster charging of mobile devices.
- USB Type C (for Power Delivery & data): Connect your laptop´s or Macbook´s USB Type C power supply to power/charge the laptop or alternatively connect a USB Type C device.
- Audio: Connect your microphone, headphone or speaker with a 3.5mm audio cable.
Recycling Information
WEEE (Waste of Electrical and Electronic Equipment), Recycling of
Electronic Products
Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection
and recycling of all waste electrical and electronic equipment. It is no
longer allowable to simply throw away electrical and electronic equipment.
Instead, these products must enter the recycling process. Each individual EU
member state, as well as the UK, has implemented the WEEE regulations into
national law in slightly different ways. Please follow your national law when
you want to dispose of any electrical or electronic products. More details can
be obtained from your national WEEE recycling agency.
CE/FCC Statement
CE Certification
LINDY declares that this equipment complies with relevant European CE
requirements.
UKCA Certification
LINDY declares that this equipment complies with relevant UKCA requirements.
FCC Certification
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. You are cautioned that changes or modification not
expressly approved by the party responsible for compliance could void your
authority to operate the equipment. This device complies with part 15 of the
FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>