Cylinda FI6277NSE Integrated Spacious Freezer User Manual
- October 27, 2023
- Cylinda
Table of Contents
- Cylinda FI6277NSE Integrated Spacious Freezer
- SAFETY INSTRUCTIONS
- Installation warnings
- DESCRIPTION OF THE APPLIANCE
- Dimensions
- USING THE APPLIANCE
- Accessories
- FOOD STORAGE
- CLEANING AND MAINTENANCE
- SHIPMENT AND REPOSITIONING
- BEFORE CALLING AFTER-SALES SERVICE
- TIPS FOR SAVING ENERGY
- TECHNICAL DATA
- INFORMATION FOR TEST INSTITUTES
- CUSTOMER CARE AND SERVICE
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Cylinda FI6277NSE Integrated Spacious Freezer
Thank you for choosing this product.
This user manual contains important information on safety and instructions
intended to assist you in the operation and maintenance of your appliance.
Please take the time to read this user manual before using your appliance and
keep this book for future reference.
Icon | Type | Meaning |
---|---|---|
WARNING
|
Serious injury or death risk
|
RISK OF ELECTRIC SHOCK
|
Dangerous voltage risk
|
FIRE
|
Warning; Risk of fire / flammable materials
|
CAUTION
|
Injury or property damage risk
|
IMPORTANT
|
Operating the system correctly
SAFETY INSTRUCTIONS
General Safety Warnings
Read this user manual carefully.
- WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
- WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
- WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer
- WARNING: Do not damage the refrigerant circuit.
- WARNING: When positioning the appliance, ensure the supply cord is not trapped or damaged.
- WARNING: Do not locate multiple portable socket outlets or portable power supplies at the rear of the appliance
- WARNING: In order to avoid any hazards resulting from the instability of the appliance, it must be fixed in accordance with the instructions.
If your appliance uses R600a as a refrigerant (this information will be provided on the label of the cooler) you should take care during transportation and installation to prevent the cooler elements from being damaged. R600a is an environmentally friendly and natural gas, but it is explosive. In the event of a leak due to damage of the cooler elements, move your fridge away from open flames or heat sources and ventilate the room where the appliance is located for a few minutes.
- While carrying and positioning the fridge, do not damage the cooler gas circuit.
- Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
- This appliance is intended to be used in household and domestic applications such as:
- staff kitchen areas in shops, offices and other working environments.
- farm houses and by clients in hotels, motels and other residential type environments.
- bed and breakfast type environments;
- catering and similar non-retail applications.
- If the socket does not match the refrigerator plug, it must be replaced by the manufacturer, a service agent or similarly qualified persons in order to avoid a hazard.
- A specially grounded plug has been connected to the power cable of your refrigerator. This plug should be used with a specially grounded socket of 10 amperes. If there is no such socket in your house, please have one installed by an authorised electrician.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances. Children are not expected to perform cleaning or user maintenance of the appliance, very young children (0-3 years old) are not expected to use appliances, young children (3-8 years old) are not expected to use appliances safely unless continuous supervision is given, older children (8-14 years old) and vulnerable people can use appliances safely after they have been given appropriate supervision or instruction concerning use of the appliance. Very vulnerable people are not expected to use appliances safely unless continuous supervision is given.
- If the supply cord is damaged, it must be replaced by the manufacturer, an authorised service agent or similar qualified persons, in order to avoid a hazard.
- This appliance is not intended for use at altitudes exceeding 2000 m
To avoid contamination of food, please respect the following instructions:
- Opening the door for long periods can cause a significant increase of the temperature in the compartments of the appliance.
- Clean regularly surfaces that can come in contact with food and accessible drainage systems
- Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.
- Two-star frozen-food compartments are suitable for storing pre-frozen food, storing or making ice cream and making ice cubes.
- One-, two- and three-star compartments are not suitable for the freezing of fresh food.
- If the refrigerating appliance is left empty for long periods, switch off, defrost, clean, dry, and leave the door open to prevent mould developing within the appliance.
Installation warnings
Before using your freezer for the first time, please pay attention to the following points:
- The operating voltage for your freezer is 220- 240 V at 50Hz.
- The plug must be accessible after installation.
- Your freezer may have an odour when it is operated for the first time. This is normal and the odour will fade when your freezer starts to cool.
- Before connecting your freezer, ensure that the information on the data plate (voltage and connected load) matches that of the mains electricity supply. If in doubt, consult a qualified electrician.
- Insert the plug into a socket with an efficient ground connection. If the socket has no ground contact or the plug does not match, we recommend you consult a qualified electrician for assistance.
- The appliance must be connected with a properly installed fused socket. The power supply (AC) and voltage at the operating point must match with the details on the name plate of the appliance (the name plate is located on the inside left of the appliance).
- We do not accept responsibility for any damages that occur due to ungrounded usage.
- Place your freezer where it will not be exposed to direct sunlight.
- Your freezer must never be used outdoors or exposed to rain.
- Your appliance must be at least 50 cm away from stoves, gas ovens and heater cores, and at least 5 cm away from electrical ovens.
- If your freezer is placed next to a deep freezer, there must be at least 2 cm between them to prevent humidity forming on the outer surface.
- Do not cover the body or top of freezer with lace. This will affect the performance of your freezer.
- Clearance of at least 50 mm is required at the top of your appliance. Do not place anything on top of your appliance.
- Do not place heavy items on the appliance.
- Clean the appliance thoroughly before use (see Cleaning and Maintenance).
- Before using your freezer, wipe all parts with a solution of warm water and a teaspoon of sodium bicarbonate. Then, rinse with clean water and dry. Return all parts to the freezer after cleaning.
- The installation procedure into a kitchen unit is given in the installation manual. This product is intended to be used in proper kitchen units only.
During Usage
- Do not connect your freezer to the mains electricity supply using an extension lead.
- Do not use damaged, torn or old plugs.
- Do not pull, bend or damage the cord.
- Do not use plug adapter.
- This appliance is designed for use by adults. Do not allow children to play with the appliance or hang off the door.
- Never touch the power cord/plug with wet hands. This may cause a short circuit or electric shock.
- Do not place glass bottles or cans in your freezer as they will burst when the contents freeze.
- Do not place explosive or flammable material in your freezer.
- When removing ice from the ice-making compartment, do not touch it. Ice may cause frost burns and/or cuts.
- Do not touch frozen goods with wet hands. Do not eat ice-cream or ice cubes immediately after they are removed from the ice-making compartment.
- Do not re-freeze thawed frozen food. This may cause health issues such as food poisoning.
Old and Out-of-order Fridges
- If your old fridge or freezer has a lock, break or remove the lock before discarding it, because children may get trapped inside it and may cause an accident.
- Old fridges and freezers contain isolation material and refrigerant with CFC. Therefore, take care not to harm environment when you are discarding your old fridges
CE Declaration of conformity
We declare that our products meet the applicable European Directives,
Decisions and Regulations and the requirements listed in the standards
referenced.
Disposal of your old appliance The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
Packaging and the Environment Packaging materials protect your machine
from damage that may occur during transportation. The packaging materials are
environmentally friendly as they are recyclable. The use of recycled material
reduces raw material consumption and therefore decreases waste production.
Notes:
- Please read the instruction manual carefully before installing and using your appliance. We are not responsible for the damage occurred due to misuse.
- Follow all instructions on your appliance and instruction manual, and keep this manual in a safe place to resolve the problems that may occur in the future.
- This appliance is produced to be used in homes and it can only be used in domestic environments and for the specified purposes. It is not suitable for commercial or common use. Such use will cause the guarantee of the appliance to be cancelled and our company will not be responsible for any losses incurred.
- This appliance is produced to be used in houses and it is only suitable for cooling / storing foods. It is not suitable for commercial or common use and/or for storing substances except for food. Our company is not responsible for any losses incurred by inappropriate usage of the appliance.
DESCRIPTION OF THE APPLIANCE
This presentation is only for information about the parts of the appliance. Parts may vary according to the appliance model
- Control panel
- Freezer upper room flap
- Freezer bottom room flap / Freezer compartment drawer
- Freezer compartment drawers
- Icematic *
- Ice tray *
- Freezer LED strip *
- In some models
General notes:
Freezer Compartment (Freezer): Most Efficient use of energy is ensured in
the configuration with the drawers and bins are on stock position.
Dimensions
USING THE APPLIANCE
Information on No-Frost technology
No-frost freezers differ from other static freezers in their operating
principle. In normal freezers, the humidity entering the freezer due to
opening the door and the humidity inherent in the food causes freezing in the
freezer compartment. To defrost the frost and ice in the freezer compartment,
you are periodically required to turn off the freezer, place the food that
needs to be kept frozen in a separately cooled container and remove the ice
gathered in the freezer compartment. The situation is completely different in
no-frost freezers. Dry and cold air is blown into the freezer compartment
homogeneously and evenly from several points via a blower fan. Cold air
dispersed homogeneously and evenly between the shelves cools all of your food
equally and uniformly, thus preventing humidity and freezing. Therefore your
no-frost freezer allows you ease of use, in addition to its huge capacity and
stylish appearance.
Display and Control Panel
Using the Control Panel
- Freezer temperature setting.
- Super Freeze mode indicator.
- Mode button. It enables the economy mode to be activated if desired.
- Alarm indicator.
- It enables the setting value of freezer to be modified and super freeze mode to be activated if desired. Freezer may be set to -16, -18, -20, -22, -24°C and super freeze mode
- Economy mode indicator.
Operating your Freezer
If your product has lighting
When the product is plugged in for the first time, the interior lights may
turn on 1 minute late due to opening tests.
Super Freeze Mode Purpose
- To freeze a large quantity of food that cannot fit on the fast freeze shelf.
- To freeze prepared foods.
- To freeze fresh food quickly to retain freshness.• To freeze a large quantity of food that cannot fit on the fast freeze shelf.
- To freeze prepared foods.
- To freeze fresh food quickly to retain freshness
How to use
Press freezer set button (#5 on control panel diagram) until Super freeze
symbol (#2 on control panel diagram) will be seen on the screen. Buzzer will
sound beep beep. Mode will be set.
During This Mode:
Economy mode can not be selected. Super freeze mode can be cancelled by the
same operation of selecting
Note: This option shall be turned on 24 hours before placing the fresh food to the freezer. After 54h, it returns to the normal set value.
Economy Mode Purpose
Energy savings. During periods of less frequent use (door opening) or absence
from home, such as a holiday, Eco program can provide optimum temperature
whilst saving power.
How to Use
- Push “MODE” button (#3 on control panel diagram) until eco symbol appears.
- If no button is pressed for 1 second. Mode will be set. Eco symbol (#6) will blink 3 times. When mode is set, buzzer will sound beep beep.
- Freezer temperature segments (#1) will show “E”.
- Economy symbol and E will light till mode finishes.
During This Mode:
- Freezer may be adjusted. When economy mode will be cancelled, the selected setting values will proceed.
- Super freeze mode can be selected. Economy mode is automatically cancelled and the selected mode is activated.
To cancel, you will just need to press on mode button.
Screen Saver Mode Purpose
This mode saves energy by switching off all control panel lighting when the
panel is left inactive.
How to Use
- Screen saver mode will be activated automatically after 30 seconds.
- If you press any key while the lighting of the control panel is off, the current machine settings will reappear on the display to let you make any change you wish.
- If you do not cancel the screen saving mode or press any key for 30 seconds, control panel will remain off.
To deactivate the screen saving mode,
- To cancel the screen saving mode, first of all, you need to press any key to activate the keys and then press and hold the Mode button (#3 on control panel diagram) for 3 seconds.
- To reactivate screen saving mode, press and hold the mode button (#3 on control panel diagram) for 3 seconds.
Freezer Temperature Settings
The initial temperature value for the freezer setting indicator is -18°C.
- Press the set freezer button once (#5 on control panel diagram).
- When you first push this button, the last set value will blink on the screen.
- Whenever you press this button, a lower temperature will be set (-16°C, -18°C, – 20°C, -22°C, -24°C, super freeze).
- When you push the set freezer button until the super freeze symbol (#2) appears, and if you do not push any other button within 1 second, super freeze will flash.
- If you continue to press it, it will restart from -16°C.
- The temperature value selected before super freeze mode or economy mode is activated and will remain the same when the mode is over or cancelled. The appliance continues to operate with this temperature value.
Recommended Temperature Values for Freezer
When to adjust
| Inner Temperature ( o C)
---|---
For minimum freezing capacity| -16
In normal usage| -18, -20
For maximum freezing capacity.| -22, -24
Note : Some built-in appliances may have a stand-by mode.
Stand-By Mode Purpose
This mode can be used to save energy when you go on vacation.
How Would It Be Used?
Select “-16” set value.
Push mode and freezer set button for 5 seconds.
Display will show “St” “bY” on the screen.
During This Mode:
In stand-by mode; all components will be disabled.
If you push the display button, display will show “St” “bY” on the screen to
show stand-by mode is active.
To cancel; push mode and freezer set button for 5 seconds.
After the mode is deactivated, error code may light on the display because the
product may be hot. The error code will turn off when the product reaches
normal temperature.
Door Open Alarm Function
If freezer door is opened more than 2 minutes, appliance sounds ‘beep beep’.
Temperature Settings Warnings
- Your appliance is designed to operate in the ambient temperature ranges stated in the standards, according to the climate class stated in the information label. It is not recommended that your fridge is operated in the environments which are outside of the stated temperature ranges. This will reduce the cooling efficiency of the appliance.
- Temperature adjustments should be made according to the frequency of door openings, the quantity of food kept inside the appliance and the ambient temperature in the location of your appliance.
- When the appliance is first switched on, allow it to run for 24 hours in order to reach operating temperature. During this time, do not open the door and do not keep a large quantity of food inside.
- A 5 minute delay function is applied to prevent damage to the compressor of your appliance when connecting or disconnecting to mains, or when an energy breakdown occurs. Your appliance will begin to operate normally after 5 minutes
Climate class and meaning:
- T (tropical): This refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 43 °C.
- ST (subtropical): This refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 38 °C.
- N (temperate): This refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 32 °C.
- SN (extended temperate): This refrigerating appliance is intended to be used at ambient temperatures ranging from 10 °C to 32 °C.
Accessories
Visual and text descriptions in the accessories section may vary according to the model of your appliance.
Ice Tray (In some models)
- Fill the ice tray with water and place in the freezer compartment.
- After the water has completely frozen, you can twist the tray as shown below to remove the ice cubes.
The Icematic (In some models)
- Pull the lever towards you and remove the ice maker tray
- Fill with water to the marked level
- Hold the left end of the lever and set the ice-tray on the icebox
- When ice cubes have formed, twist the lever to drop the ice cubes into the icebox.
Note:
- Do not fill the icebox with water in order to make ice. It can be broken.
- The movement of the ice maker may be difficult while the refrigerator is running. In such a case should be cleaned by removing the glass shelves.
Removing the icemaker
- Take out of the freezer glass shelves
- Remove the icemaker by dragging left or right on the shelf.
You can remove the icemaker to use a larger volume of the freezer compartment.
FOOD STORAGE
Freezer Compartment
For normal operating conditions, set the temperature of the freezer
compartment to -18 or -20 oC.
- The freezer is used for storing frozen food, freezing fresh food, and making ice cubes.
- Food in liquid form should be frozen in plastic cups and other food should be frozen in plastic folios or bags.For freezing fresh food; wrap and seal fresh food properly, that is the packaging should be air tight and shouldn’t leak. Special freezer bags, aluminum foil polythene bags and plastic containers are ideal.
- Do not store fresh food next to frozen food as it can thaw the frozen food.
- Before freezing fresh food, divide it into portions that can be consumed in one sitting.
- Consume thawed frozen food within a short period of time after defrosting
- Always follow the manufacturer’s instructions on food packaging when storing frozen food. If no information is provided food, should not be stored for more than 3 months from the date of purchase.
- When purchasing frozen food, make sure that it has been stored under appropriate conditions and that the packaging is not damaged.
- Frozen food should be transported in appropriate containers and placed in the freezer as soon as possible.
- Do not purchase frozen food if the packaging shows signs of humidity and abnormal swelling. It is probable that it has been stored at an unsuitable temperature and that the contents have deteriorated.
- The storage life of frozen food depends on the room temperature, the thermostat setting, how often the door is opened, the type of food, and the length of time required to transport the product from the shop to your home. Always follow the instructions printed on the packaging and never exceed the maximum storage life indicated.
- If the freezer door has been left open for a long time or not closed properly, frost will form and can prevent efficient air circulation. To resolve this, unplug the freezer and wait for it to defrost. Clean the freezer once it has fully defrosted.
- The freezer volume stated on the label is the volume without baskets, covers, and so on.
- Do not refreeze thawed food. It may pose a such as food poisoning.
NOTE: If you attempt to open the freezer door immediately after closing it, you will find that it will not open easily. This is normal. Once equilibrium has been reached, the door will open easily.
- Use the fast freezing shelf to freeze home cooking (and any other food which needs to be frozen quickly) more quickly because of the freezing shelf’s greater freezing power. Fast freezing shelf is the bottom drawer of the freezer compartment.
- To use the maximum capacity of the freezer compartment, use the glass shelves for the upper and middle section, and use the lower basket for the bottom section.
The table below is a quick guide to show you the most efficient way to store the major food groups in your freezer compartment.
Meat and fish| Preparation| Maximum storage time
(months)
---|---|---
Steak| Wrap in foil| 6 – 8
Lamb meat| Wrap in foil| 6 – 8
Veal roast| Wrap in foil| 6 – 8
Veal cubes| In small pieces| 6 – 8
Lamb cubes| In pieces| 4 – 8
Minced meat| In packaging without using spices| 1 – 3
Giblets (pieces)| In pieces| 1 – 3
Bologna sausage/salami| Should be kept packaged even if it has a
membrane| 1 – 3
Chicken and turkey| Wrap in foil| 4 – 6
Goose and duck| Wrap in foil| 4 – 6
Deer, rabbit, wild boar| In 2.5 kg portions or as fillets| 6
– 8
Freshwater fish (Salmon, Carp, Crane, Catfish)|
After cleaning the bowels and scales of the fish, wash and dry it. If necessary, remove the tail and head.
|
2
Lean fish (Bass, Turbot,
Flounder)
| 4
Fatty fishes (Tuna, Mackerel, Bluefish, Anchovy)|
2 – 4
Shellfish| Clean and in a bag| 4 – 6
Caviar| In its packaging, or in an aluminium or plastic container| 2 – 3
Snails| In salty water, or in an aluminium or plastic container| 3
NOTE: Thawed frozen meat should be cooked as fresh meat. If the meat is
not cooked after defrosting, it
must not be re-frozen.
Vegetables and Fruits| Preparation| Maximum storage
time (months)
---|---|---
String beans and beans| Wash, cut into small pieces and boil
in water| 10 – 13
Beans| Hull, wash and boil in water| 12
Cabbage| Clean and boil in water| 6 – 8
Carrot| Clean, cut into slices and boil in water| 12
Pepper| Cut the stem, cut into two pieces, remove the core and boil in
water| 8 – 10
Spinach| Wash and boil in water| 6 – 9
Cauliflower| Remove the leaves, cut the heart into pieces and
leave it in water with a little lemon juice for a while
| 10 – 12
Eggplant| Cut into pieces of 2cm after washing| 10 – 12
Corn| Clean and pack with its stem or as sweet corn| 12
Apple and pear| Peel and slice| 8 – 10
Apricot and Peach| Cut into two pieces and remove the stone| 4 –
6
Strawberry and Blackberry| Wash and hull| 8 – 12
Cooked fruits| Add 10 % of sugar to the container| 12
Plum, cherry, sourberry| Wash and hull the stems| 8 – 12
| Maximum storage time (months)| Thawing time at
room temperature (hours)| Thawing time in oven
(minutes)
---|---|---|---
Bread| 4 – 6| 2 – 3| 4-5 (220-225 °C)
Biscuits| 3 – 6| 1 – 1,5| 5-8 (190-200 °C)
Pastry| 1 – 3| 2 – 3| 5-10 (200-225 °C)
Pie| 1 – 1,5| 3 – 4| 5-8 (190-200 °C)
Phyllo dough| 2 – 3| 1 – 1,5| 5-8 (190-200 °C)
Pizza| 2 – 3| 2 – 4| 15-20 (200 °C)
Dairy products| Preparation| Maximum storage time
(months)| Storage conditions
---|---|---|---
Packet (Homogenized) Milk| In its own packet| 2 – 3| Pure Milk –
in its own packet
Cheese – excluding white cheese
|
In slices
|
6 – 8
| Original packaging may be used for short-term storage. Keep wrapped in foil
for longer periods.
Butter, margarine| In its packaging| 6|
CLEANING AND MAINTENANCE
Disconnect the unit from the power supply before cleaning.
Do not wash your appliance by pouring water on it.
Do not use abrasive products, detergents or soaps for cleaning the appliance.
After washing, rinse with clean water and dry carefully. When you have
finished cleaning, reconnect the plug to the mains supply with dry hands.
- Make sure that no water enters the lamp housing and other electrical components.
- The appliance should be cleaned regularly using a solution of bicarbonate of soda and lukewarm water.
- Clean the accessories separately by hand with soap and water. Do not wash accessories in a dish washer.
- Clean the condenser with a brush at least twice a year. This will help you to save on energy costs and increase productivity.
The power supply must be disconnected during cleaning.
Defrosting
- Your appliance performs automatic defrosting. The water formed as a result of defrosting passes through the water collection spout, flows into the water tray behind your appliance and evaporates there.
- Make sure you have disconnected the plug of your appliance before cleaning the water tray.
- Remove the water tray from its position by removing the screws (if it has screws)
- Clean it with soapy water at specific time intervals. This will prevent odours from forming.
Replacing LED Lighting
To replace any of the LEDs, please contact the nearest Authorised Service
Centre.
Note: The numbers and location of the LED strips may change according to the model.
If product equipped with LED lamp
This product contains a light source of energy efficiency class
If product equipped with LED Strip(s) or LED card(s)
This product contains a light source of energy efficiency class
SHIPMENT AND REPOSITIONING
Transportation and Changing Positioning
- The original packaging and foam may be kept for re-transportation (optional).
- Fasten your appliance with thick packaging, bands or strong cords and follow the instructions for transportation on the packaging.
- Remove all movable parts or fix them into the appliance against shocks using bands when re-positioning or transporting
Always carry your appliance in the upright position.
BEFORE CALLING AFTER-SALES SERVICE
Errors
Your freezer will warn you if the temperature of problem occurs with the appliance. Warning co
| SERVICE
the freezer is at an improper level or if a des are displayed in the freezer Indicators.
---|---
ERROR TYPE| MEANING| | WHY| WHAT TO DO
E01| Sensor warning| | Call Service for assistance as soon as possible.
E02| Sensor warning| | Call Service for assistance as soon as possible.
E03| Sensor warning| | Call Service for assistance as soon as possible.
E06| Sensor warning| | Call Service for assistance as soon as possible.
E07| Sensor warning| | Call Service for assistance as soon as possible.
E08
|
Low Voltage Warning
|
Power supply to the device has dropped to below
170 V.
| – This is not a device failure, this error helps to prevent damages to the compressor.
– The voltage needs to be increased back to required levels
If this warning continues an authorised technician needs to be contacted.
E09
|
Freezer compartment is not cold enough
|
Likely to occur after long term power failure.
| 1. Set the freezer temperature to a colder value or set Super Freeze. This should remove the error code once the
required temperature has been reached. Keep doors closed
to improve time taken to reach the correct temperature.
2. Remove any products which have thawed/defrosted during this error. They can be used within a short period of time.
3. Do not add any fresh produce to the freezer compartment until the correct temperature has been reached and the error is no longer.
If this warning continues an authorised technician needs to be contacted.
|
If you are experiencing a problem with your appliance, please check the
following before contacting the after-sales service. Your appliance is not
operating
Check if:
- There is power
- The plug is correctly placed in the socket
- The plug fuse or the mains fuse has blown
- The socket is defective. To check this, plug another working appliance into the same socket.
The appliance performs poorly Check if:
- The appliance is overloaded
- The appliance door is closed properly
- There is any dust on the condenser
- There is enough space near the rear and side walls.
Your appliance is operating noisilyNormal noises
Cracking noise occurs:
- During automatic defrosting
- When the appliance is cooled or warmed (due to expansion of appliance material).
Short cracking noise occurs: When the thermostat switches the compressor
on/off.
Motor noise: Indicates the compressor is operating normally. The
compressor may cause more noise for a short time when it is first activated.
Bubbling noise and splash occurs: Due to the flow of the refrigerant in
the tubes of the system.
Water flowing noise occurs: Due to water flowing to the evaporation
container. This noise is normal during defrosting.
Air blowing noise occurs: In some models during normal operation of the
system due to the circulation of air
The edges of the appliance in contact with the door joint are warm
Especially during summer (warm seasons), the surfaces in contact with the door
joint may become warmer during the operation
of the compressor, this is normal.
There is a build-up of humidity inside the appliance
Check if:
- All food is packed properly. Containers must be dry before being placed in the appliance.
- The appliance door is opened frequently. Humidity of the room enters the appliance when the doors are opened. Humidity increases faster when the doors are opened more frequently, especially if the humidity of the room is high.
The door does not open or close properly
Check if:
- There is food or packaging preventing the door from closing
- The door joints are broken or torn
- Your appliance is on a level surface.
TIPS FOR SAVING ENERGY
- Install the appliance in a cool, well-ventilated room, but not in direct sunlight and not near a heat source (such as a radiator or oven) otherwise an insulating plate should be used.
- Allow warm food and drinks to cool before placing them inside the appliance.
- Place thawing food in the refrigerator compartment if available. The low temperature of the frozen food will help cool the refrigerator compartment while the food is thawing. This will save energy. Frozen food left to thaw outside of the appliance will result in a waste of energy.
- Drinks or other liquids should be covered when inside the appliance. If left uncovered, the humidity inside the appliance will increase, therefore the appliance uses more energy. Keeping drinks and other liquids covered helps preserve their smell and taste.
- Avoid keeping the doors open for long periods and opening the doors too frequently as warm air will enter the appliance and cause the compressor to switch on unnecessarily often.
- Keep the covers of the different temperature compartments (such as the crisper and chiller if available) closed.
- The door gasket must be clean and pliable. In case of wear, replace the gasket.
TECHNICAL DATA
The technical information is situated in the rating plate on the internal side
of the appliance and on the energy label. The QR code on the energy label
supplied with the appliance provides a web link to the information related to
the performance of the appliance in the EU EPREL database.
Keep the energy label for reference together with the user manual and all
other documents provided with this appliance. It is also possible to find the
same information in EPREL using the link https://eprel.ec.europa.eu and the
model name and product number that you find on the rating plate , the
appliance.
See the link www.theenergylabel.eu for
detailed information about the energy label.
INFORMATION FOR TEST INSTITUTES
Appliance for any EcoDesign verification shall be compliant with EN 62552.
Ventilation requirements, recess dimensions and minimum rear clearances shall
be as stated in this User Manual at Chapter 2. Please contact the manufacturer
for any other further information, including loading plans.
CUSTOMER CARE AND SERVICE
Always use original spare parts. When contacting our Authorised Service
Centre, ensure that you have the following data available: Model, Serial
Number and
Service Index. The information can be found on the rating plate. You can find
the rating label inside the fridge zone on the left lower side. The original
spare parts for some specific components are available for a minimum of 7 or
10 years, based on the type of component, from the placing on the market of
the last unit of the model. Visit our website to:
www.cylinda.se
References
- Prisvärda svenska vitvaror- Cylinda - En enklare vardag
- APPLiA Europe | The new Energy Label | Belgium
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>