smappee EV Wall Lite Electric Charging Station User Guide
- June 11, 2024
- smappee
Table of Contents
smappee EV Wall Lite Electric Charging Station
What’s in the box?
-
EV Wall Lite
-
EV Wall mounting plate
-
Screw & plug
-
Small screw
-
Smart Charge Card
-
Quick Install Guide
-
Quick Starter Guide
Overview
Safety warning
Carrying out electrical work within the home or workplace can be dangerous and
must be conducted according to the appropriate national safety standards and
executed by a certified electrician.
For safety purposes, it is also necessary to power off the installation before
proceeding with the physical installation.
For further safety instructions and more detailed information, please consult
the full manual at smappee.com/smappee-manuals or via
the QR code:
How to install EV Wall LITE
-
Prepare the installation. Foresee an ethernet cable with stable internet connectivity, and a power supply cable between the distribution panel and the EV Wall.
-
Fix the mounting plate to the wall with the provided plugs and screws.
-
Attach the EV Wall housing to the EV Wall mounting plate with the provided small screws.
-
Connect the power supply and ethernet cable to the EV Wall.
See diagrams overleaf. In case of 3-phase delta (3*230 V), please consult the full manual online. -
Connect the B cable to the B port of the LED board.
-
Switch on the power using the circuit breaker.
-
Download the Smappee App and follow the instructions to configure your Smappee charging station.
-
Attach the front cover to the EV Wall to close it.
Only the B cable should be connected to one of the B ports on the LED board. Do not attach anything to the A port and RJ45 port of the LED board. -
Create a user account for the customer and share the location with this new username. Write the username, password and email address in the Quick Starter Guide (included in the box together with this Quick Install Guide) and hand it to your customer. This user account can be used for the Smappee App.
