Milex 209467 LED Sound Activated Rhythm Sticker Lights Instructions
- August 3, 2024
- Milex
Table of Contents
Milex 209467 LED Sound Activated Rhythm Sticker Lights
Product Information
Specifications
- Product Name: Car Sticker Lamp
- Power Source: 12VDC Inverter
- Compatibility: Connects to Cigarette Lighter or USB converter
- Additional Feature: Sound sensor for adjusting lamp activation
Product Usage Instructions
- Step 1: Connect the Car Sticker with the 12VDC Inverter.
- Step 2: Connect the inverter with the Cigarette Lighter. If your vehicle does not have a cigarette lighter, you can purchase a USB converter.
- Step 3: Insert the power into the Cigarette Lighter or USB converter.
- Step 4: Adjust the sound sensor to make the lamp light up.
FAQ
-
Q: What should I do if the lamp does not light up after following the steps?
- A: Check the connections to ensure they are secure. If the issue persists, contact Customer Service for further assistance.
-
Q: Can I use the Car Sticker Lamp with any vehicle?
- A: The Car Sticker Lamp is compatible with most vehicles that have a Cigarette Lighter or USB converter.
-
Q: How can I adjust the sensitivity of the sound sensor?
- A: Use the provided controls on the sound sensor to adjust the sensitivity based on your preference.
-
Q: Is it safe to leave the Car Sticker Lamp on while driving?
- A: For safety reasons, it is recommended to turn off the Car Sticker Lamp while driving to avoid distractions.
-
Q: What is the email address for Customer Service?
- A: You can reach Customer Service at cscare2021@gmail.com or visit www.igia.com for more information.
INSTRUCTIONS
This product is furnished with double faced adhesive, and you can stick it to the car back windshield.
- CLEAN DESIRED AREA WITH ALCOHOL PAD AND ALLOW TO FULLY DRY.
- PEEL THE BACKING AWAY SO THE DECAL IS ON THE STICKY SIDE
- PLACE DECAL ON DESIRED SURFACE
- GO OVER THE DECAL WITH A SCRAPER OR CREDIT CARD MANY TIMES TO ENSURE IT IS STUCK TO DESIRED SURFACE
- PEEL OFF THE TRANSFER TAPE SLOWLY
- Step 1 : Connect the Car Sticker with the 12VDC Inverter.
- Step 2 : Connect the inverter with the Cigarette Lighter-If your vehicle does not have a cigarette lighter, you can purchase a USB converter.
- Step 3 : Insert the power into the Cigarette Lighter or USB converter.
- Step 4: Adjust the sound sensor to make lamp light up.
Customer Service: cscare2021@gmail.com
www.igia.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>