Muzata LC37 One stop Home Lighting Installation Guide
- August 4, 2024
- Muzata
Table of Contents
Muzata LC37 One stop Home Lighting
Installation Instruction
-
Step 1 – Screw set screws into the extension connector.Don’t tighten on this step.
-
Step 2 – Insert the extension connector into the groove of LED channels.
-
Step 3 – Tighten the set screws to connect two channels.
-
Step 4 – Attach LED strip and cut off the excess part.
-
Step 5 – Snap in the LED cover.
-
Step 6 – Install the end cap.
-
Step 7 – Bend the LED strip connector wire.
-
Step 8 – Pass the connector wire through the two holes in the channel base.
-
Step 9 – Put LED channel into the channel base.
-
Step 10 – Install the tripod.
-
Step 11 – Connect the controller.
-
Step 10 – Connect 12V power supply (Not included).
Muzata One-stop Honie Lighting
Muzata provides a one-stop lighting system for your entire home. We offer a
wide range of LED channels that can be installed in a variety of places such
as walls, ground, cabinets, ceilings, skirtings, etc. You can also create a
spotless light effect with Muzata LED light strip. our comprehensive lighting
solutions will serve as a one-stop resource for your renovation needs.
Accessory
-
U108
-
USC4
-
U1SW
-
LC31
-
AC1L
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>