Muzata U1SW LED Channel User Guide

May 15, 2024
Muzata

Muzata U1SW LED Channel

Muzata-U1SW-LED-Channel-product

Overview

Muzata is a professional manufacturer dedicated to providing customers with high-quality LED channels. Muzata UISW LED channel not only effectively protects your LED strip, but also has an elegant slim look to provide a clean and soft lighting effect. Muzata UlSW has a variety of colours to meet your different design needs, making it a perfect choice for your home lighting.

Specifications

Name Model number Material For light strips
Silver LED channel with milky white LED cover ****

U1SW WW

| Plastic Cover Aluminum Channel| Width ≤ 0.47″(12mm)
Silver LED channel with clear LED cover| U1SW WT| Plastic Cover Aluminum Channel| Width ≤ 0.47″(12mm)
Black LED channel with milky white LED cover| ****

U1SW BW

| Plastic Cover Aluminum Channel| Width ≤ 0.47″(12mm)
Black LED channel with smoky black LED cover| ****

U1SW BB

| Plastic Cover Aluminum Channel| Width ≤ 0.47″(12mm)
Black LED channel with clear LED cover| ****

U1SW BT

| Plastic Cover Aluminum Channel| Width ≤ 0.47″(12mm)
White LED channel with milky white LED cover| ****

U1SW HW

| Plastic Cover Aluminum Channel| Width ≤ 0.47″(12mm)

Muzata-U1SW-LED-Channel-fig- \(2\)Muzata-U1SW-LED-
Channel-fig- \(3\)

Installation steps

Step 1
Measure the required LED channel length.

Muzata-U1SW-LED-Channel-fig- \(4\)

Step 2
Cut aluminum channels with a mitre saw and plastic covers with scissors as needed.

Step 3
Mark holes for installing clips and securing with screws.

Muzata-U1SW-LED-Channel-fig- \(5\)

Step 4
Press the channel into the mounting clip.

Step 5
Attach the LED strip to the channel.

Muzata-U1SW-LED-Channel-fig- \(6\)

Step 6
Melt the solder joint of the LED strip, remove the wire and pass it through the hole of the end cap.

Step 7
Connect the wire to the LED strip.

Muzata-U1SW-LED-Channel-fig- \(7\)

Step 8
Place one edge of the cover into the channel.

Step 9
Press the other side of the cover.
Muzata-U1SW-LED-Channel-fig- \(8\)

Step 10
Hold down the front part of the LED channel.

Step 11
Press down the rest of the cover along the channel.
Muzata-U1SW-LED-Channel-fig- \(9\)

Step 12
Install end caps on both sides (The gap can be sealed with hot melt glue) Please note that installation videos are available on our product pages for further details.

Tips

  1. Only fit for LED strips with a width ≤ 0.47″ (12mm).
  2. The cover needs to be pressed into the channel.
  3. Please follow the steps to finish the installation.
  4. If you have any installation difficulties, please watch the installation video on the product page or contact us.

About Murata
Muzata is a leading global brand dedicated to providing one-stop LED lighting solutions. Our mission is to make home improvement easy and affordable. Over the years, our unwavering commitment has earned us a reputation as a trusted brand in this industry.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals