VERMEIREN Inovys II Wheelchair User Manual

: August 3, 2024
: VERMEIREN

Table of Contents

VERMEIREN Inovys II Wheelchair
Product Information
Product Usage Instructions
Preface
Your product
Before use
- General safety instructions
- Transport and (dis)assembly
Using your wheelchair
Maintenance
Troubleshooting
Technical specifications
Service registration form
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VERMEIREN Inovys II Wheelchair

Product Information

Model: Inovys II 2024-02
Features: Foldable, suitable for indoor and outdoor use, multiple sizes available
Optional Parts: Headrest, foot strap, calf rest

Description
The Inovys II wheelchair is designed to be easy to operate, and suitable for both indoor and outdoor use. It can be folded for compact storage and is customizable with optional parts for enhanced comfort.

Important Parts

Headrest (optional)
Backrest
Arm pad
Armrest
Side plate
Seat
Leg rest
Footplate
Foot strap
Calf rest
Brake
Front-wheel
Frame
Rear wheel
Hand rim
Handgrip
Push bar
Tip cap
Identification plate

Before Use

Intended Use
The wheelchair is intended for individuals who require mobility assistance. Follow all instructions provided to ensure safe and proper use. Do not misuse the wheelchair in ways not specified in the manual.

Product Usage Instructions

Assembly and Setup

Unbox all components carefully.
Refer to the assembly manual provided for step-by-step instructions on setting up the wheelchair.
Ensure all parts are securely attached before use.

Operating the Wheelchair

Sit in the wheelchair with your back against the backrest.
Adjust the footplate and leg rest for comfort.
Grip the hand rim to propel the wheelchair forward or backward.
Use the brakes when necessary by pushing them down.

Maintenance
Regularly inspect the wheelchair for any signs of wear and tear. Keep all moving parts lubricated for smooth operation. Follow the maintenance manual for detailed maintenance instructions.

Technical Specifications

Version: G, 2024-02
Basic UDI: 5415174 122103Inovys II N9

FAQ

Q: Can I use the wheelchair outdoors?
A: Yes, the wheelchair is designed for both indoor and outdoor use.
Q: How do I adjust the footplate?
A: To adjust the footplate, loosen the adjustment knob, position the footplate as needed, and tighten the knob securely.

Instructions for a Specialist Dealer
This instruction manual is part and parcel of the product and must accompany every product sold.

Version: G, 2024-02

Preface

Congratulations! You are now the owner of a Vermeiren wheelchair!

This wheelchair is made by qualified and committed personnel. It is designed and produced according to high-quality standards guarded by Vermeiren.
Thank you for your trust in the products of Vermeiren. To support you in the use of this wheelchair and its operating options, this manual is offered. Please read it carefully; it will help you to get familiar with the operation, capabilities, and limitations of your wheelchair.
If you still have questions after reading this manual, do not hesitate to contact your specialist dealer. He/she will be glad to help you.

Important note

To ensure your safety and to prolong the lifetime of your product, please take good care of it and have it checked and/or serviced regularly.
The warranty on this product is based on normal use and maintenance as described in this manual. Damage to your product caused by improper use or lack of maintenance will cause the warranty to lapse.
This manual reflects the latest product developments. Vermeiren has the right to implement changes to this type of product without any obligation to adapt or replace similar products previously delivered.
Pictures of the product are used to clarify the instructions in this manual. Details of the depicted product may deviate from your product.

Information available

On our website http://www.vermeiren.com/ you will always find the most recent version of the information in this manual. Please consult this website regularly for possible updates.
Visually impaired people can download the electronic version of this manual and have it read out through a text-to-speech software application.
- User manual For user and specialist dealer
- Installation Manual for Specialist dealer
- Service manual for wheelchairs For specialist dealer

Your product

Description
This Inovys II wheelchair is easy to operate and can be used indoors as well as outdoors. It is foldable which makes it very compact to store. The wheelchair is available in multiple sizes and is easily expandable with optional parts to enhance the user’s comfort. The following picture shows all the parts that are relevant to the user. In the operation and maintenance section, these parts are described if applicable.

Before using your wheelchair, check the technical details and limits of intended use.

$VERMEIREN-Inovys-II-Wheelchair-fIG- $1$$

Headrest (optional)
Backrest
Arm pad
Armrest
Side plate
Seat
Leg rest
Footplate
Foot strap
Calf rest
Brake
Front-wheel
Frame
Rear wheel
Hand rim
Handgrip
Push bar
Tip cap
Identification plate

Before use

Intended use
In this paragraph, a brief description of the intended use of your wheelchair is given. Additionally, relevant warnings are added to the instructions in the other paragraphs. In this way, we would like to make you aware of the possible misuse that may appear.

This wheelchair is suitable for indoor and outdoor use.
This wheelchair is designed and produced solely to transport one (1) person with a maximum weight, according to the configuration of the technical specifications in § 5. It is not designed to transport goods or objects, nor for any other use as previously described.
Depending on the type of wheels on your wheelchair, it can be operated by an attendant or by the user sitting in the wheelchair. You should NOT use this wheelchair without an attendant if you suffer from physical or mental impairments that may put you, or other people, in danger when riding the wheelchair. For this reason, consult your doctor first and make sure that your specialist dealer is informed about his advice.
Only use accessories and spare parts approved by Vermeiren.
Please read all technical details and limits of your wheelchair in § 5.
The warranty of this product is based on normal use and maintenance as described in this manual. Damage to your product caused by improper use or lack of maintenance will cause the warranty to lapse.

General safety instructions

CAUTION
Risk of injuries and/or damage

Please read and follow the instructions in this manual. Otherwise, you may get injured or your wheelchair may get damaged.

Keep the following general warnings in mind during use:

Do not use your wheelchair if you are under the influence of alcohol, medicines, or other substances that may influence your riding abilities. This also counts for your attendant operating the wheelchair.
Be aware that some parts of your wheelchair may get very hot or cold due to ambient temperature, solar radiation or heating devices. Be careful when touching. Wear protective clothing if the weather is cold. When going outdoors, riding gloves can be used to improve the grip on the hand rims.
Take note of the instructions for care and service. The manufacturer is not liable for damage caused by improper servicing/care.

Be aware that your wheelchair may interfere with some types of anti-theft systems, depending on the settings used. This may cause the shop’s alarm to go off. In case a serious incident has occurred involving your product, notify Vermeiren or your specialist dealer as well as the competent authority in your country.

Symbols on the wheelchair
The symbols in the following list apply to your wheelchair. Symbols can be found in the relevant ISO standards (ISO 7000, ISO 7001, and IEC 417).

Maximum weight of the user in kg
Outdoor/indoor use (battery and power adapter excluded)
For indoor use only (battery and power adapter)
Maximum safe slope in ° (degrees).
Not intended to be used as a seat in a motor vehicle
Type designation

Transport and (dis)assembly

Moving out of the way
Move the wheelchair by using its wheels and roll it to the destination. If this is not possible, and disassembling is not desired, ask for help to lift the wheelchair. Firmly grasp the frame with both hands and lift it from the floor. Do not use feet armrests, or wheels to grasp the wheelchair.

Transport by vehicle

WARNING Risk of injuries
Never use the same safety belt for passengers and wheelchairs.

Disassemble and lift the wheelchair in the vehicle according to the instructions.
Store the wheelchair and its parts in the luggage compartment. If luggage and passenger compartments are NOT separated or enclosed, fasten the wheelchair frame securely to the vehicle.

You can use a ramp to push the wheelchair inside the vehicle. Apply the parking brakes after loading.

Use of the wheelchair as a seat in a motor vehicle

WARNING Risk of injuries

The wheelchair has passed the crash test of ISO 7176-19: 2008 and, as such, has been designed and tested for use only as a forward-facing seat in a motor vehicle. Ease of access to, and maneuverability in, motor vehicles can be significantly affected by wheelchair size and turning radius.
The wheelchair’s pelvic belt alone is not suited as an occupant restraint belt.
Use the wheelchair’s pelvic belt and the applicable three-point belt in the vehicle to prevent head and chest impacts with the vehicle.
Do not use postural supports to restrain the user in the vehicle unless they are labeled as being by the requirements specified in ISO 7176-19:2008.
Following involvement in any type of vehicle collision, have your wheelchair inspected by the specialist dealer or manufacturer’s representative before reuse?

The wheelchair is tested using the four-point strap-tie system and a 3-point occupant-restraint system. Whenever feasible, use the seat of the vehicle and store the wheelchair in the cargo area.

Steps to secure the wheelchair in a motor vehicle:

Check that the vehicle is equipped with a suitable wheelchair tie-down and occupant-restraint system, which conforms to ISO 10542.
Check that the components of the wheelchair tie-down and occupant restraint system are not frayed, contaminated, damaged, or broken.
If equipped with an adjustable seat and/or back tilt, make sure that the wheelchair user is sitting as upright as possible. If the user’s condition prevents this, a risk assessment should be done to evaluate the user’s safety during transit.
Remove all mounted accessories such as trays and respiratory equipment, and secure them in a safe place.
Position the wheelchair facing forward in the traveling direction, centrally between the tie-down rails mounted on the floor of the vehicle.
Mount the front securement straps according to the instructions of the strap-system manufacturer at the indicated place (figure 1). This place is marked on the wheelchair with a symbol (figure 1).
Roll back the wheelchair until the front straps are tight.
Apply the wheelchair brake.
Mount the back securement straps according to the instructions of the strap-system manufacturer at the indicated place (figure 1). This place is marked on the wheelchair with a symbol (figure 2).

$VERMEIREN-Inovys-II-Wheelchair-fIG- $8$$

Steps to secure the wheelchair user:

Remove both armrests (if possible).
If present, attach the wheelchair’s pelvic belt.
Attach the occupant restraint belts according to the instructions of the strap-system manufacturer.
Wear the pelvic belt low across the front of the pelvis, so that the angle of the pelvic belt is within the preferred zone of 30° to 75° to the horizontal, similar to that shown in the figure.
A steeper (greater) angle within the preferred zone is desirable.
Adjust the belt tightly according to the instructions of the strap-system manufacturer, consistent with the user’s comfort.
Ensure that the restraint belt connects in a straight line to the anchor point in the vehicle and that no bends in the belt are visible, for instance at the axle of the rear wheel.
Install the armrests, if desired. make sure that belts are not twisted or held away from the body by wheelchair components such as armrests or wheels.
Position the seatbelt buckle so that the release button will not be contacted by wheelchair components during a crash.
Make sure that the shoulder belt restraints fit over the shoulders, see Figure 4. $VERMEIREN-Inovys-II-Wheelchair-fIG- $10$$

Assembly

CAUTION Risk of injuries or damage

Make sure that your fingers, clothes, and buckles won’t get trapped during assembly.
Always keep the swing range of the footrest in mind to prevent bystanders from being injured or objects from being damaged.
Before use, always make sure that all assembled parts have been firmly secured.

$VERMEIREN-Inovys-II-Wheelchair-fIG- $11$$

Place the wheelchair with four wheels on the ground.
- Fold the backrest frame (34) open.
Mount the front of the spring to the backrest frame with the fastener pin (33) and lock its brace.
- Make sure that the backrest frame is firmly secured to the spring.
Hang the backrest with its four screws in the four brackets (35) of the backrest frame.
- Tighten the two upper star buttons (36) by hand.
- Make sure that the backrest is firmly secured.
Turn the star knob (37) of the armrest support anticlockwise and remove it.
- Insert the armrest (9) in the armrest support.
- Insert the star knob (37) and turn it clockwise until it is finger-tight.
- Make sure that the armrest is firmly secured.
- Repeat this for the second armrest.
Hold the leg rest (5) sideways and hang it in the footrest support (39). Make sure that the leg rest hole (44) fits over the lower support part and that the leg rest pin (38) is inserted in the top support.
- Swing the leg rest (5) inwards until it clicks in position.
- Repeat for the second leg rest.
Swing the footplate (6) downwards.
- Repeat for the second footplate.
Swing the calf rest support (40) inwards.
- Turn the calf rest (8) to the back.
- Repeat this for the second calf rest.
(If applicable) mount the headrest (1) with the square tube in the headrest support (41) on the backrest.
- Turn the star knob (42) finger tight.

Your wheelchair is now ready for use.

Disassembly

CAUTION Risk of injuries or damage

Make sure that your fingers, clothes, and buckles won’t get entrapped during disassembly.
Always keep the swing range of the footrest in mind to prevent bystanders from being injured or objects from being damaged.

Apply both parking brakes by operating the brake lever (10).
Close the calf rest (8) and turn the calf rest support (40) outwards.
- Repeat this for the other calf rest.
- Fold both footplates (6) upwards.
Pull the leg rest lever (50) and swing the leg rest (5) outwards.
- Lift the leg rest to remove it.
- Repeat this for the other leg rest.
Turn the star knob (37) anticlockwise.
- Pull and hold the star knob while pulling the armrest (9) out of the armrest support.
- Retighten the star knob (37).
(If applicable) demount the headrest (1):
- Loosen the star knob (42) of the headrest support and remove it.
- Pull the headrest up until it is free from the support on the backrest.
Loosen the two upper star buttons (36) of the backrest by hand.
- Pull the backrest upwards until it is released from the four brackets (35).
Demount the spring from the backrest frame by opening the brace of the fastener pin (33) and removing it.
Fold the backrest frame (34) down onto the seat.
- Place the fastener pin (33) back in the frame.

(Dis)Assembling rear wheels (only for 22”/24”):
For transport purposes, it might be necessary to (dis)assemble the rear wheels.

Removing the rear wheels:

Press and hold the button (43) while sliding the wheel axle out of the axle bushy.
Repeat this for the other wheel and place the wheelchair gently on the tipping caps.

Installing the rear wheels:

Take one of the rear wheels and lift the wheelchair on one side.
Press and hold the button (43) while sliding the wheel axle in the axle bushy.
Release the button to lock the wheel.
Repeat this for the other wheel. Make sure that both wheels are firmly secured.

First use and storage

CAUTION Risk of battery damage

Make sure that your wheelchair is stored dry to prevent mold from growing and damage the upholstery.
Check the technical details for storage.

Using your wheelchair

WARNING Risk of injuries

First, read the previous chapters and inform yourself about the intended use. Do NOT use your wheelchair unless you have read and fully understood all instructions.
In case of doubts or questions, do not hesitate to contact your local specialist dealer, your care provider, or technical adviser to help you.

Parking brakes (only for 22”/24” wheels)

CAUTION Risk of injuries

Only operate the brake lever when your wheelchair is stopped.
An attendant should operate the brake lever if you have impaired mobility.
Make sure the wheelchair is on a flat horizontal surface before releasing the brakes.
Never release both brakes simultaneously.
Brakes may only be adjusted by your specialist dealer.

CAUTION Risk of damage
Do not use the parking brakes to slow the wheelchair down during movement.

Your wheelchair is equipped with two manually operated parking brakes. These brakes are intended to prevent movement of the wheelchair when parked.

Releasing brakes [A]:

1. With one hand, hold one hand rim tight (or your attendant holds the push bar with one hand).
2. Pull the brake lever (10) of the OTHER wheel to the REAR.
3. Repeat this for the second wheel and parking brake.

Applying brakes [B]:

1. With one hand, hold one hand rim tight (or your attendant holds the push bar with one hand).
2. Push the brake lever (10) of the OTHER wheel to the FRONT until you feel a distinctive lock.
3. Repeat this for the second wheel and parking brake.![VERMEIREN-Inovys-II-Wheelchair-fIG- \(29\)](https://manuals.plus/wp-content/uploads/2024/08/VERMEIREN-Inovys-II-Wheelchair-fIG-29.png)

Drum brakes (only for 16” fixed wheels)

CAUTION Risk of injuries

Make sure that the wheelchair is on a flat horizontal surface before releasing the brakes.
Never release both brakes simultaneously.
To park or stop on a slope, use the parking brakes after coming to a halt.
Brakes may only be adjusted by your specialist dealer.

To operate the drum brakes:

Pull the brake levers (60) in a squeeze motion.
Each brake lever (60) can be blocked by pushing the lock lever (61) down with your finger.
Release the brake levers (60).

To move/ride again:

Pull the brake levers (60) in a squeeze motion. The lock lever (61) is released by this movement.
Hold the handgrips firmly, while releasing the brake levers (60).

Figure 6 Operating drum brakes

Moving to/from a wheelchair

CAUTION Risk of injuries or damage

In case you cannot perform the transfer safely, ask someone to assist you.
Do not stand on the footplates during transfer into or out of the chair.

Transfer

Position the wheelchair as close as possible to you when sitting in your chair, couch, seat, or bed.
Apply both parking brakes to block the movement.
Move the backrest and seat to a sitting position.
Fold the footplates upwards to prevent standing on them, or turn the leg rests aside to free the passage for transfer.
If necessary, remove the armrest and/or legrest on one side.
Transfer to/from the wheelchair using the strength of your arms, or with the help of an attendant or lifting equipment.

Sitting in the wheelchair

Sit down on the seat with your lower back against the backrest.
Reinstall the armrest and/or legrest, if removed.
Turn the leg rests back to the front, fold down the footplates, and put your feet on the footplates.
Make sure that your upper legs are horizontal and that your feet are in a comfortable position; adjust the wheelchair according to the instructions in § 3.4.

Comfort adjustments

CAUTION Risk of injuries or damage

The following comfort adjustments can be made by an attendant or caretaker. All other adjustments are done by your specialist dealer.
Always keep the swing range of the footrest in mind to prevent bystanders from being injured or objects from being damaged.
Make sure that your fingers, clothes, and buckles won’t get trapped during adjustment.

Backrest and seat inclination

CAUTION Risk of injuries or damage

Be aware that the stability decreases when the wheelchair is moved from sitting upright to an inclined position.
Apply the parking brakes before adjusting the backrest and seat inclination.

The seat inclination and backrest inclination can be adjusted simultaneously or separately by an attendant. Make sure that the patient sits in the chair when the attendant adjusts the backrest inclination and that the wheelchair does not tip over.

Seat inclination:

Squeeze the lever (1) on the left handle (see label) towards the handle to adjust the seat inclination.
Pull/Push the seat in the desired position (0° to + 21°), the gas pressure spring shall be pressed in/out.
Loosen the lever (1) to block the gas pressure spring.

Backrest inclination:

Squeeze the lever (1) on the right handle (see label) towards the handle to adjust the angle of the backrest.
Pull/Push the backrest in the desired position (0° to + 54°), the gas pressure spring shall be pressed in/out.
Loosen the lever (1) to block the gas pressure spring.

If your wheelchair features drum brakes, the levers (1) are used as brakes; additional levers (3) have been mounted to adjust the backrest and seat inclination.

Armrest height
The arm pads (3) of the wheelchair can be adjusted in 6 different height positions:

Turn the star knob (45) anticlockwise to unlock.
Pull and hold the star knob to release the inner tube of the armrest (9).
Slide the inner tube of the armrest (9) up/down in the support (46) until the desired height. Make sure that the holes on the inner/outer tube align.
Retighten the star knob (45) by turning it clockwise.
Repeat this for the second armrest. Make sure that the armrests are firmly secured.

Figure 7 Adjusting armrest height

Push handles/push bar height

CAUTION Risk of injuries
Always use the available adjustment holes on the push handle. Never exceed the maximum height adjustment.

The push handles (16) and push bar (23) are connected and can be adjusted in 7 different height positions:

Loosen both star knobs (31) on the handle supports and remove them.
Adjust the height of both push handles simultaneously by sliding them up/down in the supports. Make sure that the holes on the inner/outer tube align.
Insert the two star knobs (31) in the supports and the adjustment holes.
Turn the star knobs clockwise until they are finger-tight.
Make sure that the push handles are firmly secured.

Figure 8 Adjusting push-handle height

Leg rest angle (BZ7-BZ8)

Loosen the lever (62) at the rotation point.
Adjust the angle of the leg rest by lifting/lowering the footplates (between 100° – 190°).
Retighten the lever (62) firmly by hand.
Repeat this for the second leg rest. Make sure that both leg rests are firmly secured.

Figure 9 Adjusting footrest angle

Tip cap height

Press and hold the spring button (63).
Slide the tip cap tube (64) in/out of the frame tube.
Release the spring button.
Repeat this for the second tip cap. Make sure that both tip caps are firmly secured.

Figure 10 Adjusting tip cap height

Riding
Depending on your medical condition and type of wheelchair, you can ride the wheelchair yourself or have it pushed by an attendant.

CAUTION

CAUTION Risk of entrapment

Prevent your fingers from being caught by the wheel spokes.
Prevent getting your hands trapped on the hand rims when riding through small passages.
When driving with an attendant, keep your arms away from the wheels and keep your feet on the footplates.

CAUTION Risk of injuries and damage

Do NOT drive on slopes, obstacles, steps, or kerbs larger than the size described in the technical specifications.
Do not proceed with your wheelchair in traffic. Always stay on the pavement.
Do not operate the hand rims with wet hands.
Pay attention if the road has holes or gaps that may cause entrapment of the wheels.
Avoid stones and other objects that may block the wheels.
Always keep the swing range of the footrest in mind to prevent bystanders from being injured or objects from being damaged.
Before every usage, make sure that:
- all adjustments are firmly secured.
- the parking brakes are working properly.
- the tires are in good condition.

Riding with an attendant

Release the brakes or have them released by the attendant, while he/she is holding the wheelchair to prevent movement.
The attendant grasps the handgrips or push bar to push the wheelchair in the desired direction.
After stopping, apply the brakes while holding the wheelchair in place.

Riding on your own

Release the parking brakes one by one.
Move your hands to the highest position on both hand rims.
Lean forward and push/turn the hand rims forward until your arms are straight.
Swing your arms loosely back to the topside of the hand rims and repeat the push movement.
To stop: wait until the wheelchair stops and move forward/backward by operating the hand rims. Apply the parking brakes one by one.

Riding on slopes

CAUTION Risk of injuries

If the attendant has too little strength to control the wheelchair, stop riding and use the brakes immediately.
When you stop on a (small) slope, use your brakes, since the wheelchair may start moving unexpectedly.

Secure yourself in the wheelchair with a safety belt.
Ask an attendant or a bystander to help you.
Drive slowly and in a straight line. Lean slightly forward (A/B) when going up the slope. Lean backward, against the backrest, when going down the slope.
Never reverse on a slope.

Figure 11 Going up a slope

Using ramps
Risk of injuries caused by tipping over

Only use ramps approved by Vermeiren and do not exceed their maximum load.
Make sure that the wheelchair does not touch the ground or ramp due to the inclination of the wheelchair.
Only negotiate ramps with the help of one or two attendants.

Adjust the position of the backrest, seat, and footrest to decrease the volume taken by the wheelchair and to increase the stability during inclination.
Remove the footrests.
Follow the instructions.

Using stairs
Risk of injuries caused by tipping over

Stairs should always be negotiated with the help of two attendants.
Never try to use stairs that are not appropriate for wheelchairs.

To use the stairs while sitting in your wheelchair, the following instructions should be followed:

Remove the footrests.
One attendant tips the wheelchair slightly backward by the handles.
The second attendant grabs the wheelchair at the front of the frame, on both sides of the wheelchair.
Stay calm, avoid sudden movements, and keep your arms inside the wheelchair.
Both attendants lift and pull the wheelchair from step to step while the rear wheels roll over the steps.
After using the stairs, mount the footrests back in place.

Figure 12 Using stairs

Coping with obstacles
Risk of injuries caused by tipping over

Always ask for the assistance of one or two attendant (s).
Make sure that the footplates won’t touch the ground while taking an obstacle. If necessary, remove the footrests.
Do not use your wheelchair on an escalator.
If available, wear your safety belt.

Small kerbs (up or down)
These can be taken forward (E / F) with one attendant:

The attendant moves the wheelchair forward approaching the kerb. Make sure the footplates won’t touch the kerbs.
Lean backward to reduce the pressure on the front wheels.
The attendant holds the handles firmly while moving forward. If necessary he uses the tip cap to keep the front wheels lifted until they have passed the kerb rim.
The attendant releases the pressure on the handles and tip cap to gently put the front wheels on the ground.
Next, he holds the handles firmly while pushing the wheelchair with the rear wheels up/down the kerb.

Figure 13 Negotiating small kerbs with one attendant

Medium kerbs (up or down)
These should be taken backward with one attendant:

The attendant reverses the wheelchair so that the rear wheels approach the kerb first (G / H).
Going down: Lean forward (G) to move your center of gravity to the front. Going up: Lean backward (H) to move your center of gravity to the back.
The attendant pulls the wheelchair gently from/on the kerb.

Figure 14 Negotiating medium kerbs with one attendant

Higher kerbs
Higher kerbs, but below maximum size, see §5, should be taken with the help of two attendants.

Going down:

Remove the footrests.
The attendant moves the wheelchair forward approaching the kerb.
Lean backward to reduce the pressure on the front wheels.
The attendant holds the handles firmly and uses the tip cap to keep the front wheels lifted till they have passed the kerb rim.
The second attendant grabs the front of the frame and moves backward while pulling the rear wheels down the kerb.
The first attendant releases the pressure on the handles and tip cap to put the front wheels on the ground.

Going up:

Remove the footrests.
The first attendant reverses the wheelchair so that the rear wheels approach the kerb first.
Lean backward to move your center of gravity to the back.
The second attendant grabs the front of the frame and moves forward while pulling/pushing the rear wheels on the kerb. The first attendant lifts and holds the handles firmly to prevent the wheelchair from tipping over.

Maintenance

Your wheelchair requires minimum maintenance, but it is advisable to inspect the wheelchair regularly to drive trouble-free for years.

Points of maintenance

Risk of injuries and damage

Repairs and replacements may only be undertaken by trained persons and only genuine replacement parts of Vermeiren should be used.
The last page of this manual contains a registration form for the specialist dealer to record each service.
The service frequency depends on the frequency and intensity of use. Contact your dealer to agree to a common timetable for inspection/maintenance/repair.

Before each use
Inspect the following points:

All parts: Present and undamaged or unworn.
All parts: Clean.
Wheels, seat, leg rests, arm rests, foot rests, footplates, and headrest (if applicable): Well secured.
Condition of wheels/tires.
Condition of brakes.
Condition of frame: No deformation, instability, weakness, or loose connections
Seat, backrest, arm pads, leg pads, and headrest (if applied): No excessive wear (like dented spots, damage or tears).

Contact your specialist dealer for possible repairs or part replacements.

Yearly or more often
Have your wheelchair inspected and serviced by your specialist dealer, at least once a year, or more often. The minimum maintenance frequency depends on use and should therefore be commonly agreed on with your specialist dealer.

If stored
Make sure that your wheelchair is stored dry to prevent mold from growing and the upholstery from being damaged.

Instructions of maintenance

Wheels and tires
Proper working of the brakes depends on the state of the tires, which can change due to wear and contamination (water, oil, mud, …).

Keep your wheels free of wires, hair, sand, and carpet fibers.
Check the profile of the tires. If the tread depth is less than 1 mm, the tires need to be replaced. Contact your specialist dealer for this matter.

Cleaning

Risk of damage by moisture

Never use a hose or high-pressure cleaner to clean the wheelchair.
Wipe all rigid parts of the wheelchair with a damp cloth (not drenched). If necessary, use a mild soap, suitable for varnishes and synthetics.
The upholstery can be cleaned with lukewarm water and a mild soap. Do not use abrasive cleaning agents to clean.

Disinfection

Risk of damage
Disinfections may only be undertaken by trained persons. Consult your specialist dealer.

Troubleshooting

Even if you use your wheelchair properly, a technical problem may occur. In this case, contact your local specialist dealer.

Risk of injuries and damage to the wheelchair

NEVER attempt to repair your wheelchair yourself.

The following symptoms may indicate a serious problem. Therefore, always contact your specialist dealer if you spot any of the following deviations:

Strange sound;
Uneven tread wear on one of the tires;
Jerky movements;
The wheelchair deflects to one side;
Damaged or broken wheel assemblies.

Expected lifespan
The average lifespan of your wheelchair is 5 years. Depending on the frequency of use, driving circumstances, and maintenance, the lifespan of your wheelchair will increase or decrease.

End of use
At the end of life, you need to dispose of your wheelchair according to the local environmental legislation. The best way to do so is to disassemble the wheelchair to facilitate the transport of recyclable parts.

Technical specifications

The technical details below are only valid for this wheelchair, at standard settings and optimal ambient conditions. Take these details into account during use. The values are no longer applicable if your wheelchair has been modified, damaged, or suffers from severe wear.

Table 2: Technical specifications

Brand	Vermeiren
Type	Wheelchair
Model	Inovys II
Description	Dimensions for all configurations
---	---
Max. weight of the user	135 kg
Static stability downhill	10° **
Static stability uphill	15° **
Static stability sideways	12° **
Obstacle climbing	60 mm
Overall length with footrests (depends on seat-depth adjustment)	1050 – 1090

mm
Dismantled length without footrests (depends on seat depth adjustment)| 830 – 870 mm
Effective seat width| 350 mm

400 mm

450 mm

500 mm

Overall width (depends on the seat width)| 580 mm

630 mm

680 mm

730 mm

Dismantled width (without armrest)| 600 mm

650 mm

700 mm

Total height (without headrest)| 990 – 1060 mm
Dismantled height

(with folded backrest, without armrests)

| 710 – 780 mm
Seat plane angle| 0° – +21°
Effective seat depth| 460 – 520 mm
Seat surface height at front edge (with cushion)| 460 – 530 mm
Backrest angle| 0° – +54°
Backrest height| 550 – 585 mm
Distance between footrest and seat| 400 – 570 mm *
Angle foot plate| 80° – 100°
The angle between seat and footrest| 104° – 194°
Distance between armrest and seat| 220 – 320 mm
Front location of armrest structure| 460 – 490 mm
Description| Dimensions per configuration
---|---
Diameter Rear wheels| 16″ (T30)

with drum brakes

Footrests Armrests Rear wheels

Backrest

| __

4,8 kg

3,45 kg NA

3,6 kg

| __

4,8 kg

3,45 kg

3,6 kg

Turning radius (diameter)| 1520 mm| 1620 mm
Strength tests according to| ISO 7176-8
Ignitability of upholstery according to| ISO 7176-16
Use and storage temperature| + 5 °C ~ + 45°C
Storage and use of humidity| 30% ~ 70%
We reserve the right to introduce technical changes. Measurement tolerance ± 15 mm /1,5 kg / 1,5°. (*) Do not adjust the footrest in maximum length to prevent the footplate from touching the ground. (**) Tested in standard configuration

NA Not applicable