ROBERTS 10-194 Floor and Wall Scraper and Stripper Instructions
- August 2, 2024
- ROBERTS
Table of Contents
ROBERTS 10-194 Floor and Wall Scraper and Stripper
INSTRUCTION MANUAL
4″ Floor and Wall Scraper & Stripper
INSTRUCTIONS FOR USE
- Make sure the blade is clean and free of debris / adhesive after each use
- Use care when using or storing scraper as it has a sharp blade
- Manufacturer recommends reversing blade when not in use, so sharp blade is not exposed
- If blade displays any rust, cracks, or chips in metal, replace blade immediately
REPLACEMENT BLADES
Use ROBERTS 10-442-10
4” Floor & Wall Scraper
Replacement Blades, sold separately.
Supporting Professional Installers Since 1938
Specifications
- Model: 10-194
- Product Name: Scraper & Stripper
- Replacement Blades: ROBERTS 10-442-10
Product Usage Instructions
Using the Scraper & Stripper
- Ensure the area to be worked on is clean and free of debris.
- Hold the scraper with a firm grip and position it at the desired starting point.
- Apply pressure as needed and scrape along the surface to remove material.
- Repeat the process until the desired area is cleared.
Replacing Blades
- Purchase ROBERTS 10-442-10 replacement blades separately.
- Ensure the scraper is not in use and detached from the handle.
- Remove the old blade carefully by sliding it out of the slot.
- Insert the new replacement blade into the designated slot until secure.
- Reattach the scraper to the handle before further use.
FAQ
Q: Where can I purchase replacement blades?
A: Replacement blades (ROBERTS 10-442-10) can be bought separately from authorized retailers or online stores.
Q: How do I clean the Scraper & Stripper?
A: Clean the Scraper & Stripper by wiping it with a damp cloth after use. Avoid prolonged exposure to moisture to prevent rusting.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>