ROBERTS WPESQW Woodworking Sharpening Accessory Kit Instructions
- May 15, 2024
- ROBERTS
Table of Contents
ROBERTS WPESQW Woodworking Sharpening Accessory Kit Instructions
Instructions for use
Woodworkers’ Square Guide
(WPESQW)
The square guide raises the tool away from the tool platform. Using a set
square or triangle adjust the bar to ensure a perfectly accurate position for
sharpening all your chisels and plane blades.
Woodworkers’ Square Guide
Used in conjunction with the very fine abrasive sharpening belts, the
Woodworkers Square Guide will give a perfect cutting edge on any woodworking
chisel and plane blade.
The Angle Setter has all the recommended bevel angles, depending on the wood being used, for woodworking chisels such as bevel edge, paring and framing chisels.
Ensure that the desired sharpening belt is fitted, the angle setter is set to
the required angle and tighten the locking bolt.
Check that the slot in the tool rest is clean and place the key of the
straight edge jig into it. Switch on the Pro Edge and carefully place the tool
to be sharpened against the guide bar of the jig.
Hold the blade against the jig and carefully push the tool forward until the bevel makes contact with the sharpening belt. A slight side to side motion can be used.
Aluminium Oxide Belt
(WPE240A) x1 240 grit
Perfect for high Carbon steel tools such as woodworking and carving chisels.
Trizact Belts
(WPE600T) x1 600 grit
(WPE1200T) x1 1200 grit
(WPE3000T) x1 3000 grit
Perfect for producing a polished bevel and fine cutting edge on Carbon steel
tools
Abrasive Belts
- Aluminium Oxide Belt – 240 grit
- Trizact Belts – 600, 1200 & 3000 grit
We have selected these belts because they use an even cut rate and give a
vastly prolonged belt life over standard abrasive belts. This produces knives
and tools with consistent honed bevels and incredibly sharp cutting edges.
As with all abrasives, the belts should always be used in the order of grit
from the coarsest to the finest. This is to maximise the efficiency of each
belt and to achieve the best possible results.
Other belts are available.
For more details on additional accessories as well as replacement and
additional sharpening belts, contact your local stockist or Robert Sorby.
Robert Sorby Ltd, Atlas Way, Atlas North, Sheffield S4 7QQ, England. Tel:
+44(0) 114 225 0700 Email: sales@robert-sorby.co.uk
www.robert-sorby.co.uk
Registered in England: Company No 3464018, Registered office: Atlas Way, Atlas
North, Sheffield, S4 7QQ VAT No. GB 172 4019 84
All sizes and dimensions stated are nominal. It is our policy to continuously
improve products and hence we reserve the right to change designs without
prior notice. E & OE
Part No. WPEWWKIT
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>