ROBERTS EC1181C 3-Light Metal and Glass Vanity Light Instruction Manual
- October 30, 2023
- ROBERTS
Table of Contents
ROBERTS EC1181C 3-Light Metal and Glass Vanity Light
Product Information
The EC1180C/EC1181C is a light fixture that includes a wire connector, mounting bracket, fixture body, glass, socket collar, and barrel knobs. The product requires a maximum wattage rating as specified in the wattage caution label located near the socket. The product does not come with bulbs.
Product Usage Instructions
- Before starting the installation process, ensure that the main power is turned off to avoid the risk of electrical shock.
- Refer to the wattage caution label located near the socket for maximum wattage rating. Do not exceed maximum rated wattage.
- Assemble the product by connecting the wire connector (A) to the HOT (OR BLACK) WIRE from the fixture to HOT WIRE from power supply with the outlet box.
- Mount the product by using the mounting bracket (B) and long screws (not included).
- Install the glass (E), socket collar (D), and bulb (not included) (F) into the fixture body (C).
- Attach the barrel knobs (Item a, Quantity 2) to the fixture body (C).
Note: The above diagram is for illustration purposes only and may not match the style of your light fixture.
ASSEMBLY & INSTALLATION INSTRUCTIONS
Components List
Hardware List
WARNING
TO AVOID THE RISK OF ELECTRICAL SHOCK, BE SURE TO TURN OFF MAIN POWER PRIOR TO
INSTALLATION.
CAUTION
Refer to the wattage caution label located near the socket for maximum wattage
rating. Do not exceed maximum rated wattage.
- Carefully unpack fixture from the carton. Take the parts out of the package and lay all the fixture components in a clean and flat surface.
- Attached Canopy Mounting Screws (a) to the Mounting Bracket (B) with screws facing outward. Attach Mounting Bracket (B) to outlet box with Long Screws (b) (not included). Note: The side of mounting plate marked “GND” must face out.
- Connect the GROUND WIRE from the fixture and canopy to junction box, secure the electrical connections using the Wire Connector (A). Connect the NEUTRAL (OR WHITE) WIRE from the fixture to NEUTRAL WIRE from power supply with the Wire Connector (A). Connect the HOT (OR BLACK) WIRE from fixture to HOT WIRE from power supply with the Wire Connector (A). Tuck wires neatly back into the outlet box.
- Mount Fixture Body (C) on to the Mounting Bracket by lifting it on to the screws facing outward. Adjust Fixture Body (C) as desired, then tighten and secure in place with Barrel Knobs (c).
- Install Glass (D) onto the Fixture Body (C) and tighten the Glass (D) using the Socket Collar (E).
- Screw Bulb (not included) (F) into the lamp socket. Do not exceed the maximum wattage specified on the fixture’s wattage rating label. MAXIMUM 100 Watts.
Note: (1). The above diagram illustrates the installation of your new light fixture. This is a representative drawing and may not match the style of your light fixture.