MASTERCRAFT P41515W Poly and Steel Dry and Wet/Dry Vacuum Cleaners Instruction Manual

P41515W Poly and Steel Dry and Wet/Dry Vacuum Cleaners

“`html

Product Information

Specifications:

• Brand: MASTERCRAFT
• Model: P41515W
• Type: Dry & Wet/Dry Vacuum Cleaner
• Intended Use: Commercial

Product Usage Instructions

Safety Precautions:

It is essential to follow these safety precautions to ensure
safe operation of the vacuum cleaner:

1. Do not use the vacuum cleaner on wet surfaces to avoid electric
   shock.

2. Store the vacuum indoors and away from rain.

3. Unplug the vacuum when not in use or during servicing.

4. Do not allow children to play with or operate the vacuum.

5. Use only recommended attachments and accessories.

6. Inspect the cord and plug for damage before use. Contact an
   authorized service center if damaged.

7. Avoid pulling, twisting, or running over the cord with the
   vacuum.

8. Avoid handling the plug or vacuum with wet hands.

9. Avoid inserting objects into openings and keep them clear of
   dust and debris.

10. Avoid picking up smoking or burning items.

Operating Instructions:

1. Before using the vacuum, carefully unpack and inspect for any
   damage.

2. Plug the vacuum into a suitable power outlet.

3. Turn on the vacuum using the designated power switch.

4. Move the vacuum over the desired area to clean using the
   appropriate attachments.

5. After use, turn off the vacuum and unplug it from the power
   outlet.

6. Empty the dust bin or replace the bag as needed according to
   the user manual.

Frequently Asked Questions (FAQ):

Q: Can I use this vacuum cleaner on wet surfaces?

A: No, this vacuum cleaner is not suitable for use on wet
surfaces to prevent electric shock.

Q: What should I do if I discover damage upon unpacking the

vacuum?

A: Immediately notify the transportation company that delivered
your vacuum within 5 days of delivery to report any damage.

Q: How often should I empty the dust bin or replace the

bag?

A: Empty the dust bin or replace the bag as needed based on
usage and according to the instructions provided in the user
manual.

“`

This Owner’s Manual is provided and hosted by Appliance Factory Parts.
MASTERCRAFT P41515W Owner’s Manual
Shop genuine replacement parts for MASTERCRAFT P41515W
Find Your MASTERCRAFT Vacuum Cleaner Parts – Select From 99 Models ——– Manual continues below ——–

SAFETY, OPERATI ON & M AI NTENANCE M ANUAL
POLY & STEEL DRY & WET/DRY VACUUM CLEANERS
This unit is intended for commercial use.
READ AND FOLLOW A LL I NSTRUCTI ONS, WARNI NGS & CAUTI ONS
BEFORE USI NG THI S VACUUM /BLOWER

This vacuum cleaner will afford you many years of trouble-free operating satisfaction, provided it is given proper care. All parts have passed rigid quality control standards prior to being assembled to produce the finished product. Prior to packaging, the vacuum was again inspected for assurance of flawless assembly.
Your vacuum is protectively packed to prevent damage in shipment. We recommend that upon delivery, unpack the vacuum and inspect it for any possible dam-

age. Only a visual examination will reveal damage that may have occurred.
If damage is discovered, immediately notify the transportation company that delivered your vacuum. As a shipper, we are unable to report claims for concealed damage. You must originate any claims within 5 days.
This manual is for your protection and information. PLEASE READ CAREFULLY since failure to follow precautions could result in discomfort or injury.

SAVE THESE I NSTRUCTI ONS

READ A LL I NSTRUCTI ONS
BEFORE OPERATI NG

PAGE 1

Part No 335797 Rev D – W/D Vacuum Manual – Printed in USA 07/19/04

PAGE 2

I M PORTANT S A FETY I NSTRUCTI ONS

WARNI NG:
To Reduce the Risk of Fire, Electric Shock or Injury:
Dry Va cuums
Electric shock could occur if used on wet surfaces. DO NOT expose to rain – Store Indoors
We t Va cuums
To avoid electric shock DO NOT expose to rain. Store Indoors Electric shock could occur if power nozzle is used on wet surfaces.

When using this electric vacuum, basic precautions should always be followed, including the following:

1] DO NOT leave the vacuum when plugged in. Unplug it from the outlet when not in use and before servicing.
2] This is NOT a toy. Close attention is necessary when used around or near children.
3] Use only as described in this safety manual. Use only the manufacturer’s recommended attachments and accessories.
4] DO NOT use this vacuum with damaged cord or plug. If the vacuum is not working as it should, because it has been dropped, damaged, left outdoors or dropped into water, contact an authorized service center or factory.
5] DO NOT pull the vacuum by the cord, use cord as a handle, close a door on the cord or pull cord around sharp edges and corners. DO NOT run vacuum over the cord. Keep the cord away from heated surfaces.
6] DO NOT unplug the vacuum by pulling on the cord. To unplug, grasp the plug, not the cord.
7] DO NOT handle the vacuum plug or vacuum with wet hands.
8] DO NOT put any objects into openings. DO NOT use with any openings blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
9] Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.

10] DO NOT pick up anything that is smoking or burning such as cigarettes, matches, or hot ashes.
11] DO NOT use without dust bag and/or filters in place for dry operation and wet adaptor for wet operation.
12] Turn OFF all the controls before unplugging.
13] Use extra care when cleaning on stairs.
14] DO NOT use this vacuum to pick up flammable or combustible liquids such as gasoline or use in areas where they may be present.
15] DO NOT use where anesthetics or oxygen are used.
16] Replace damaged or worn parts immediately with genuine original equipment parts to maintain safety and to protect your limited warranty.
17] DO NOT use an extension cord unless absolutely necessary. If an extension cord is used, then wire size must be #14 gauge or larger and should not exceed 50 feet in length. The extension cord must be three-wire type to insure GROUNDING protection.
This vacuum must be connected to a properly grounded outlet only. See grounding instructions (Page 3). If your vacuum has an outlet for a motorized power nozzle, always turn the vacuum OFF before connecting or disconnecting the motorized nozzle.

SAVE THESE I NSTRUCTI ONS

D A N GER

Improper use of the grounding plug can result in a risk of electric shock.

Electrical equipment must be grounded. If it should mal-function or breakdown, grounding provides a path of least resistance for electrical current to reduce the risk of electric shock. This vacuum is equipped with a cord having an equipmentgrounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and

grounded in accordance with all local codes and ordinances.
If repair or replacement of the cord or plug is necessary, DO NOT connect the grounded wire to either flat blade terminal. The wire with insulation having an outer surface that is green with or without yellow stripes is the grounding wire.

GROUNDI NG I NSTRUCTI ONS

GROUNDI NG M ETHODS

This electric equipment is for use on a nominal 120 volt circuit, and has a grounded plug that looks like the plug illustrated in (Fig A). A temporary adaptor that looks like the adaptor illustrated in (Fig B & C) may be used to connect this plug to a 2-pole receptacle as shown in (Fig B) if a properly grounded outlet is not available.

The temporary adaptor should be used only until a properly grounded outlet (Fig A) can be installed by a qualified electrician. The green color rigid ear, lug or the like extending from the adaptor must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adaptor is used, it must be held in place by a metal screw (Fig C).

WARNI NG:

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service per-
son if you are in doubt as to whether the outlet is properly grounded. DO NOT modify the plug provided with the equipment. If it will not fit
the outlet,have a proper outlet installed by a qualified electrician.
Note: In Canada, the use of a temporary adaptor is not permitted by the Canadian Electrical Code.

Treat this vacuum as you would any other high grade precision made product. Dropping, unreasonable bumping across thresholds and other misuses may result in a damaged unit which will not be covered by warranty.
When not in use, the power cord should be wrapped around the motor head for storage.

Read this manual completely before operating this vacuum. It is important to follow instructions in this manual to prevent the possibility of injury or damage to the user and/or vacuum.

CARE OF THI S V A CU U M

PAGE 3

LI RE TOUTES LES I NSTRUCTI ONS AVANT DE FAI RE FONCTI ONNER ( CET A PPAREI L)

A VERTI SSEM ENT
Pour reduire les risques d’incendie, de choc electrique ou de blessure:
POUR APPAREI L SEC Pour réduire les risques de choc électrique, ne pas aspirer de maitières humides, ne pas exposer à la pluie et garder
l’aspirateur à l’intérieur. POUR APPAREI L HUM I DE Pour réduire les risques de choc électrique, ne pas exposer à la pluie et garder l’aspiraleur à l’intérieur.
L’utilisation d’un appareil électrique demande certaines précautions:

1] Ne pas laisser l’appareil sans surveillance lorsqu’il est branché. Débrancher lorsque l’appareil n’est pas utilise ét avant l’entretien.
2] Ne pas permettre aux enfants de jouer avec l’appareil.Une attention particulière est nécessaire lorsque l’appareil est utilisé par des enfants ou à proximité de ces derniers.
3] N’utiliser que conformément à cette notice avec les accessoires recommandés par le fabricant.
4] Ne pas utiliser si le cordon ou la fiche est endommagé. Retourner l’appareil à un atelier de réparation s’il ne fonctionne pas bien, s’il est tombé ou s’il a été endommagé, oublié à l’extérieur ou immergé.
5] Ne pas débrancher en tirant sur le cordon. Tirer plutôt la fiche.
6] Ne pas toucher la fiche ou l’appareil lorsque vos mains sont humides.

7] Ne pas tirer, soulever ou traîner l’appareil par le cordon. Ne pas utiliser le cordon comme une poignée, le coincer dans l’embrasure d’une porte ou l’appuyer contre des arêtes vives ou des coins. Ne pas faire rouler l’appareil sur le cordon. Garder le cordon à l’écarte des surfaces chaudes.
8] N’insérer aucun objet dans les ouvertures. Ne pas utiliser l’appareil lorsqu’une ouverture est bloquée. S’assurer que de la poussière, de la peluche, des cheveux ou d’autres matières ne réduisent pas le débit d’air.
9] Maintenir les cheveux, les vêtements amples, les doigtet toutes les parties du corps à l’écart des ouvertures et des pièces mobiles.
10] Ne pas apsirer de matières en combusion ou qui dégagent de la fumée, comme des cigarettes, des allumettes ou des cendres chaudes.

11] Ne pas utiliser l’appareil si le sac à poussière ou le filtre n’est pas en place.
12] Mettre toutes les commandes à la position ARRET avant dé debrancher l’appareil.
13] User de prudence lors du nettoyage des escaliers.
14] Ne pas aspirer des liquides inflammables ou combustibles, comme de l’essence, et ne pas faire fonctionner dans des endroits où peuvent se trouver de tels liquides.
15] Toujours mettre l’interruptuer de l’appariel à la position ARRET avant de brancher ou de débrancher la brosse à moteur.
16] Ne brancher qu’à une prise de courant avec mise àla terre. Voir les instructions visant la mise à la terre.

PAGE 4

I NSTRUCTI ONS V I SANT LA M ISE À LA TERRE

Cet appareil doit être mis à la terre. En cas dé défaillance ou de panne éventuelles, la mise à la terre fournit au courant un chemin de moindre résistance qui réduit le risque de choc électrique. Cet appareil est pourvu d’un cor-

don muni d’un conducteur de terre et d’une fiche avec broche de terre. La fiche doit être branchée dans une prise appropriée correctement instalée et mise à la terre conformément aux règlements et ordonnances municipaux.

Cet appareil est destiné à un circuit de 120V et est muni d’une fiche de mise à la terre semblable à celle illustrée par le croquis A de la figure “A”. S’assurer que l’appareil est branché à une prise de courant ayant la même configuration que la fiche. Aucun adaptatteur ne devrait être utilisé avec cet appareil.
A VERTI SSEM ENT

Un conducteur de terre mal raccordé peut entraîner un risque de choc électrique. Consulter un électricien ou un technicien d’entretien qualifié si vous n’êtes pas certain que la prise soit cor-

rectement mise à la terre. Ne pas modifier la fiche fournie avec l’appareil-si elle ne peut être inséreé dans la prise, faire installer une prise adéquate par un électricien qualifié.

CONSERVER CES I NSTRUCTI ONS

4 -Ca s t e r Ta n k s

Glide m obile Ta n k w /Ha n dle

This vacuum requires some assembly.
1] Carefully remove and set aside motor head and filter assembly
2] Turn tank upside down.
Poly Tanks: Press caster into plastic socket until bottom of stem fits flush against plastic socket.
Steel Tanks: Insert casters into caster mount assemblies.

This vacuum is shipped with the handle in the storage position and must be moved to the operating position
1] Firmly grasp speed pin on each side of handle and pull up and out.
2] Pulling handle slowly away from the tank, align front handle holes with holes in handle bracket.
3] Insert speed pins through holes on both sides, locking handle in position. Attach tool caddy. (Not included with all models).

V A CU U M TA N K
A SSEM BLY

HOSE, WAND & TOOL A SSEM BLY

Hose & Sw ive l Con n e ct or
The hose and swivel connector are pre-assembled at the factory. To attach the swivel connector to intake fitting on vacuum tank:
1] Line up swivel connector slots with retaining rivets on the intake.
2] Insert swivel connector and twist clockwise until rivets reset against slot end.

11/4 ” To o l Kit Asse mbly
Wand Assembly: Both sections are exactly the same. Slide the tapered end of one section into the slotted end of the other wand section.
Attach Hose: Slide curved elbow on hose into wand end with slots on the side.
Install Tool: Insert tool into the tapered end of the wand.

11/2 ” To o l Kit As s e m bly
Wand Assembly: Align button lock of upper wand section with the opening for button lock in the lower wand section and push sections together.
Attach Hose: Slide free end of hose into the grooved end of upper wand.
Install Tool: Turn wand nut counterclockwise approximately (4) complete turns. Insert the tool into wand nut and coupling. While holding tool in place, turn nut clockwise until wand nut is fully locked.

CAUTI ON:
Exercise caution when handling the motor head. Dropping the motor head may cause permanent damage to internal components.

PAGE 5

DRY OPERATI ON
WET/DRY OPERATI ON

WARNI NG:
Electric shock could occur if used on wet surfaces DO NOT expose to rain – Store Indoors.

Dry (only) vacuums are equipped with an air-thru motor are designed for dry pick-up only.
Wet/dry vacuums are equipped with a bypass motor can be used for dry and wet pick-up. When ordered to be used as a dry vacuum, the unit is shipped with a dry filter only.
Dr y Filt e r I n s t a lla t ion
1] Remove the motor head and set aside. Empty filters, hose and other attachments that may be packed in the tank.
2] Install a disposable paper filter bag as illustrated on the bag, attach cloth filter to wire filter frame, set filter assembly on tank, replace motor head and snap down holddown clamps.

Dr y Filt e r M a int e na nce
In order to maintain maximum vacuum cleaner efficiency it is important to clean the cloth filter each time the tank is emptied. To clean the cloth filter, shake off loose particles and brush exposed surface with a soft bristle brush.
NOTE: DO NOT WASH, shrinkage to the cloth and damage to the gasket can occur.

WARNI NG:
To avoid electric shock DO NOT expose to rain. Store Indoors. Electric shock could occur if power nozzle is used on wet surfaces.

Adaptor w/Foam Filter Shipped w/Poly
Tank Vacuums
When ordered as a wet/dry vacuum, this unit is shipped with a dry filter for dry pickup and wet adaptor for liquid recovery. Follow instructions on page 5 for dry operation
We t Pick -Up Ada pt or Inst allat ion
The safety float located in the protective frame of the wet adaptor stops the vacuum action of motor head when maximum recovery of liquid is reached.

Adaptor w/Wire Cage Shipped w/Steel Tank Vacuums
1] Disengage the three (3) clamps that hold the motor head to the tank and carefully set aside.
2] Remove the dry filter assembly and disposable paper filter bag.
3] Set the wet adaptor on the tank, replace the motor head and snap down the holddown clamps.
Note: The wet pickup adaptor on some motor head are permanently mounted and are not removed for dry pickup.

PAGE 6

Pa pe r Ba g & Clot h Filt e r s Inst allat ion
1] Expand paper filter bag pleats, then grasp scored ends of cardboard and pull forward completely onto inlet tube as close to tank wall as possible.
2] Position cloth filter assembly on the tank, then place motor head on tank and close clamps.

Loa de d Filt e r Ba g Re m ova l
1] Remove motor head and cloth filter assembly and lay cleaner on its side with inlet tube on top.
2] Remove filter bag from inlet and pull bag out of tank, using care not to puncture bag with inlet tube.
3] Reseal cardboard flap that covered filter bag opening. Install a new paper filter bag.

FI LTER I NSTALLATI ON
& REM OVAL

The foam filter on the wet adaptor for the poly tanks MUST be washed after each use or the vacuum’s performance will be greatly reduced, and also checked for clogging, wear and tear. If the filter is clogged with dirt, lint, etc., it won’t work.
To Clean Foam Filter:
1] Remove the motor head assembly from the tank.
2] Slide foam sleeve down off the plastic float cage.

3] Wash out the foam sleeve with water and a mild detergent, rinse out with clean water until the water is clear.
4] After cleaning the foam filter, check it for signs of wear and tear. Replace if there are holes in the foam material large than a normal pore size. Reorder part no 365300 from your distributor.
To Install Foam Filter:
1] Gently pull the foam filter up and over the plastic float cage until it covers all the cage openings.

CARE OF WET A DAPTOR W /FOA M FI LTER

REM OVAL OF LI QUI DS FROM VACUUM TANKS
Import ant
DO NOT store the vacuum with any liquids inside the tank. Before storing or converting over for dry pickup run the emptied vacuum for approximately 5 minutes to eliminate moisture in the tank hose and tools.

Ta n k s w it h ou t Dra in Va lve s

St e e l Ta n k s w /Dr a in Va lve s

Poly Ta n k s w / Ga t e Va lve s

1] Disengage clamp from tank, remove motor head and wet pickup adaptor. Carefully set aside.
2] Pour liquid from tank into suitable drain.

1] Center the drain valve over a drain in the floor.
2] Open drain valve by turning the valve counterclockwise and continue turning until the desired flow is reached.
3] After the tank is drained, and before closing the drain valve make sure that there are no obstructions that will prevent the valve from sealing. Turn valve clockwise until it is fully closed and sealed.

1] Center the tank’s gate valve over a floor drain.
2] Pull up on the gate valve handle to empty the tank.

PAGE 7

TROUBLE SHOOTI NG GUI DE
Address: 777 South Street
P.O. Box 2310 Newburgh, N Y 12550-0606
TEL: 800-835-7812 845-565-8850
FA X : 800-752-6883 845-565-9392
URL: www.mastercraftusa.com
E-m a il: mail@mastercraftusa.com

CAUTI ON:

Always disconnect power cord before servicing vacuum.

PROBLEM : Los s of Va cu u m .

CA U SE:

SOLUTI ON:

1] Full disposable paper filter bag. 2] Dry filter assembly clogged. 3] Clogged hose or wand. 4] Tank rim damaged. 5] Loose or broken fan.
6] Motor not working.
7] Float not functioning.
8] Gasket worn.

1] Replace disposable paper filter bag. 2] Clean cloth filter. 3] Remove obstruction. 4] Replace tank. 5] Contact manufacturer or authorized
service center. 6] Contact manufacturer or authorized
service center. 7] Check to see if ball on rod moves
freely or tank is full. 8] Replace gasket.

PROBLEM : M ot or is n ot r u n n in g.

CA U SE:

SOLUTI ON:

1] Broken switch. 2] Power cord defective. 3] Motor defective. 4] Blown fuse or tripped circuit breaker.

1] Contact manufacturer or authorized service center.
2] Contact manufacturer or authorized service center.
3] Contact manufacturer or authorized service center.
4] Replace fuse or reset circuit breaker.

PROBLEM : Du s t blow in g f r om va cu u m w h e n r u n n in g.

CA U SE:

SOLUTI ON:

1] Full disposable paper filter bag. 2] Disposable paper filter bag not
installed properly or off inlet tube. 3] Cloth filter bag dirty. 4] Cloth or paper filter bag is torn. 5] Paper filter bag is not installed.

1] Replace disposable paper filter bag. 2] Reinstall properly or replace
disposable paper filter bag. 3] Clean cloth filter bag. 4] Replace. 5] Install paper filter bag.

PROBLEM : Wa t e r blow in g f r om va cu u m w h e n r u n n in g.

CA U SE:

SOLUTI ON:

1] Tank is full of liquid. 2] Sudsy or foamy liquid is being
picked up.

1] Empty tank. 2] Add defoamer to tank.

WARNI NG:
Repairs should only be performed by an authorized service center.

PAGE 8

Part No 335797 Rev D – W/D Vacuum Manual Printed in USA 07/19/04

References

• Repair Your Grill: Shop Replacement Parts for 24,880 Models
• Mastercraft Vacuum Cleaner Parts - Select From 99 Models

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>