RIGHT WEIGH 201-EBT-11B Exterior Digital Scale for Straight Trucks Installation Guide
- June 3, 2024
- Right Weigh
Table of Contents
RIGHT WEIGH 201-EBT-11B Exterior Digital Scale for Straight Trucks
WHAT’S INCLUDED
- 1 x 201-217-11 – Gauge and mounting bracket
- 1 x 221-SK – Epoxy strain sensor installation kit
SENSOR CONFIGURATION
The gauge should be set to detect 1 Spring Sensor. See the Air/Spring Suspension Gauge manual for more information on how to set the sensor configuration.
APPLICATIONS
Straight Truck: Spring Steer and Air Drive Suspension
Sensor Location:
The strain sensor should be located on the top, and center of the steer
axle. See the 221-SK manual for more information on how to install the sensor.
The air sensor should be connected directly to an airbag on the drive axle
group.
Mode:
Set the gauge to Spring Average Air Average (SA AA) mode – separates weight
into the front axle group (steer axle) and the back axle group (drive). See
Air/Spring Suspension Gauge manual for information on how to set the mode
.
CONTACT US
Smart Truck Solutions
+61 418 622840
rightweigh.com.au
leigh@rwls.com.au.
Scan here to see additional resources on our website including full installation manuals, quick setup guides, and video tutorials!
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>