S862 GPS Speedmeter

Product Information

Specifications

• Product Model: S862A, S862B, S862C, S881, S882, S82, S86,
  S881A, S881B, S881C

• Input: Type-C 5V/0.5A

• Size: 60x70x80mm

• Material: ABS

• Color: Black/Silvery

• Mode: Metric/Imperial

• Weight: 64g

Product Usage Instructions

Illustration Guide

Section A: Display areas.

Section B: Over speed warning – Speed >
85MPH or Speed > 128KM/H.

Section C: Speed Unit.

Section D: Power ON/OFF – Single click to power
ON or OFF the device. Double click to change the Speed Unit between
Metric or Imperial.

Installation Method

1. Tear off the protective film of the double-sided adhesive on
   the bottom base.

2. Find the appropriate slope position in front of the steering
   wheel.

3. Ensure that the steering wheel is not obstructed during
   use.

4. Press to make the double-sided adhesive more secure and wait
   for 12 hours before use.

Usage Scenarios

• Searching for GPS Signal: The device will
  indicate when searching for a GPS signal.

• IDLE or STOP: The device will display IDLE or
  STOP when the vehicle is not in motion.

• Signal is Good, Displaying the Speed: Once the
  GPS signal is acquired, the device will display the speed.

FAQ

Q: Why is the speed obtained by GPS slightly different from the

original vehicle speed?

A: The speed obtained by GPS may vary slightly
due to factors like signal accuracy and processing delays.

Q: Can I make modifications to the device?

A: Any changes or modifications not approved by
the manufacturer could void the device’s warranty and operation
authorization.

Q: What are the FCC compliance rules for this device?

A: The device complies with part 15 of the FCC
Rules and must operate without causing harmful interference or
rejecting received interference.

S862 GPS Speedmeter For TELSA Model 3/Y User Manual
Product model: S862AS862BS862CS881S882S82S86S881AS881BS881CS882AS882BS882C
The S862 GPS Speedometer is a product that utilizes
real-time data received by satellites to provide speed display; This product is widely used in various scenarios that require speed acquisition. The S862 GPS Speedometer supports multiple satellite systems, including GPS and BDS. The S862 GPS code table will be widely used in vehicles such as cars and bicycles, especially for Tesla Model 3/Y.

Parameter

Input : Type-C 5V/0.5A Size : 60x70x80mm

Material: ABS

Colour : Black/silvery Mode: Metric/Imperial Height:64g

Illustration

section A: Display areas. section B: Over speed warning.

Speed > 85MPH

or

Speed > 128KM/H

section C: Speed Unit.

section D: Power ON/OFF.

Click to Power ON or Power OFF the

device. Double click to change the Speed Unit, Metric

or ImperialS862A.

Installation method

Tear off the protective film of the double-sided

adhesive on the bottom base;

Find the appropriate slope position in front of the

steering wheel;

Ensuring that the steering wheel is not obstructed

during use;

Press to make the double-sided adhesive more secure,

and wait for 12 hours before use;

Usage scenarios

Searching for GPS Signal.

IDLE or STOP.

Signal is good, displaying the speed.
Notes 1. The speed obtained by GPS is slightly different from the original vehicle speed, and the
speedometer on the GPS code table is for reference only. Please pay attention to safe driving. 2. When in parking mode for more than 10 minutes, the product will automatically shut down, and you can click the button to restart it. 3. When the GPS signal is weak, the device will enter a shutdown state if it cannot search for the GPS signal for a long time. 4. The product comes with a magnetic phone holder function. After installing the product in front of the steering wheel, please turn the steering wheel once to ensure that it does not interfere with the product. 5. The base of the product is only applicable to the old model 3/Y, and if it is a new model 3/Y, it will not be applicable. The new model product is currently under hot development. 6. The product can be used in other scenarios that require display speed. Please resolve the installation issue yourself. 7. The product has passed CE, FCC, ROHS and other testing certifications, please use it with confidence.
Made in Shenzhen, China

FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>