Shenzhen Gude Electronic Technology GW1 Wireless Bone Conduction Headphones User Guide

Shenzhen Gude Electronic Technology GW1 Wireless Bone Conduction

Headphones

The product is too small to place complete label information, so the label is placed in the charging bin.

Thanks for your support
May our product exceed your expectations for it.
Please read this product manual carefully before use better enough to use it properly.

Basic Parameters

• Bare weight of the whole machine: 80g
• Headphone bare metal weight: 15g
• Headphone type: wireless bone conduction bluetooth earphone
• Bluetooth version: V 5.3
• Transmission distance: 10 meters
• Bluetooth frequency band: 2.4GHz-2.48GHz
• Headphone capacity: 60mAh
• Charging compartment capacity: 700mAh
• Playing time: 4 hours at a time (about 80% volume)
• Charging time: 1.5 hours
• The number of charging cycles of a single charging box: 4 times

Applicable Products

Mobile phones with Android 5.0 and IOS 8.0 or above, PSP, laptops and other terminal devices with Bluetooth function.

Basic Accessories

• TYPE C charging cable x1
• Instruction manual x1
• Wireless bone conduction headset x1
• Long ear hook accessories x2

Schematic

• A. Headphone charging port
• B. Switch machine/multi-function button
• C. Working indicator
• D. Microphone call hole
• E. Bone conduction speaker sound unit
• F. Elastic ear hook
• G. Short ear hook silicone
• H. Long ear hook silicone
• I.Charging compartment working indicator
• J.Charging compartment Type-C charging interface

Instructions for use of silicone ear caps

1. The short ear cap silicone is assembled by default.
2. The long ear cap can enhance the wearing stability and make the movement more stable.
3. Customers can replace the ear caps according to their own needs.
4. It needs to be replaced with short ear caps when loading into the charging compartment.

Instructions

Pairing for the first time:
In the off state, open the charging compartment, then the headset is turned on and enters
the automatic Bluetooth pairing mode. Turn on smart phones, etc.device, from the Bluetooth
list, find “GW1″, and click to connect; after confirming the connection is completed, the
headset voice prompts ” Connected”

Tum on the headset:
In the off state, open the charging compartment or take out the headset until you see the blue light on, accompanied by “Power on”beep.

Tum off the headset:
In the power-on state, close the charging compartment or press and hold the multi-function button for a single earphone for 4 seconds, the red light flashes, and the prompt sound of “Power off” will be heard.

Chinese and English language switching:
In the power-on state, click the multi-function button on the right or left ear 4 times in a row to complete the switch, accompanied by a “Chinese mode or Englist mode” prompt.

Left and right ear pairing connection:
With the lid closed, open the charging compartment, the left and right earbuds will be automatically paired and connected, or a single earphone will be automatically
The charging case is taken out, and there will be a beep sound of “Connected”.

To answer a call:
When there is an incoming call, the headset prompts “beep beep”, click the multi-function button to complete the answer

Hang up the call:
During a call, click the multi-function key to finish hanging up;

Reject the call:
When there is an incoming call, the headset prompts “beep beep”, long press the multi-function button for 2 seconds to complete the rejection;

Play/Pause:
When playing music, click the left or right multi-function button to play or pause the music;

Volume up or next song:
When playing music, double-click the multi-function button on the right ear to increase the volume, and press and hold the multi-function button on the right ear to switch to the next song; the maximum volume is accompanied by a “di-” sound.

Volume down or previous song:
In the state of playing music, double-click the multi-function button on the left ear to decrease the volume, and press and hold the multi-function button on the left ear to switch to the previous song; the minimum volume is accompanied by a “di-” sound.

How to activate SiriVoice Assistant:
In the connected state, click the multi-function button on the right or left ear 3 times to activate the voice assistant or Siri, accompanied by a beep sound.

How to restore factory settings:
In the pairing state, press and hold the muti-function button for 10 seconds, the red light flashes 3 times, and restore the factory settings

Headphone charging:
After use, put it into the charging compartment, automatically charge the headset, and enter the sleep state after completion.

Charging compartment indicator light:

• When charging, the indicator light will continue to run, and one light is always on, which means 25% of the power is completed.
• When charging is complete, the four lights are always on, and the power is 100%.
• When the charging compartment is low, 1 light flashes.
• Open the charging compartment, the indicator lights all flash once, then turn off.
• When the charging compartment is closed, the indicator lights all flash once and then turn off.

Precautions: The headset will turn off automatically after 5 minutes without connecting to any Bluetooth device.

LED status

• Power on: the blue light is always on for 1S;
• Shutdown: the red light is always on for 1S
• Pairing: red and blue lights flash alternately;
• When in standby (connected to a mobile phone): the blue light flashes once every 10S;
• During a call: 10S blue light flashes once;
• When playing music: 10S blue light flashes once
• The charging case is charging: the indicator light keeps running;
• The charging of the charging compartment is completed: the four indicators are always on;
• Charging compartment low battery reminder: a single indicator light flashes;

Common Problem

Q1: How to connect the headset

1. Open the charging compartment (without taking out the headset).
2. Search for the corresponding bluetooth name on your mobile phone or bluetooth device, and click to connect.

Q2: How to switch the instruction language

1. Make sure it is on.
2. Click the multi-function button of the right ear or left ear 4 times in a row to complete the Switch, accompanied by a prompt sound.

Q3: How to restore factory settings

1. In the pairing state.
2. Press and hold the multi-function button for 10 seconds, don’t let go, until the red light flashes 3 times to complete the reset.
   If the above still does not solve your problem, it is recommended to contact the dealer you purchased in time to provide you with techrnical support and after-sales service in time, thank you again for your support!

FCC STATEMENT:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following twO conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits fora Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>