EVOLVEO ACSALMPIR Alermex Pro, Wireless PIR Motion Sensor User Manual
- June 3, 2024
- Evolveo
Table of Contents
MANUAL
MODEL VERSION / DATE
ACSALMPIR l. / 25. 3. 2022
ACSALMPIR Alermex Pro, Wireless PIR Motion Sensor
EVOLVEO Alarmex Pro, wireless PIR motion sensor
Thank you for choosing our product. Please read these instructions carefully
before use.
This product is only compatible with EVOLVEO Alarmex Pro, a smart wireless
WiFi/GSM alarm. Pair with the control panel according to the instructions in
the EVOLVEO Alarmex PRO user manual.
The detector uses advanced digital processing technology.
It has automatic temperature compensation function, low voltage warning,
intelligent energy saving, etc. Based on the detection of the human body’s
infrared heat energy, it sends a wireless signal that triggers a host alarm.
Its advantages are low environmental impact, low number of false alarms, easy
installation, reliable and safe use, etc.
Installation description
Pair the detector according to the instructions in the EVOLVEO Alarmex Pro
manual.
Switch the power switch on the back of the device to the “ON” position. The
LED lights up when infrared radiation from the human body is detected and a
wireless signal is sent to activate the device.
Warning:
– The recommended installation height is 1.8~2 meters above the ground, the
detection distance is ≤8m, the transmission distance is ≤100 meters (without
obstacles).
Test the distance before installation.
– We do not recommend installation directly against mirrors, doors and
windows.
– We do not recommend installation near sources of cold and heat.
– Do not install detectors in areas with constant airflow that could cause a
false alarm. For example, a moving curtain due to a draught.
Technical parameters
| Model | ACSALMPIR |
|---|---|
| Working voltage | 9V (1* 6F22 battery) |
| Standby current | 15uA |
| Current on activation | 25mA |
| Working temperature | 0-55°C |
| Detection zone | 12m / 110° |
| Wireless connection parameters | 433MHz |
| Dimensions | 109 52 37 mm |
Warranty and post-warranty service
Repairs and servicing can only be carried out at an authorized service point
for EVOLVEO products (more at www.evolveo.com),
otherwise you may damage your mobile phone and lose your warranty.
Disposal: The crossed-out container symbol on the product, in the accompanying documentation or on the packaging means that in EU countries, all electrical and electronic equipment, batteries and accumulators must be disposed of separately at the end of their useful life as separated waste. Do not dispose of these products in unsorted municipal waste.
**** DECLARATION OF CONFORMITY
The company Abacus Electric, s.r.o. hereby declares that the EVOLVEO ACSALMPIR
telephone meets the requirements of the standards and regulations that are
relevant for the given type of equipment.
The full text of the Declaration of Conformity can be found at
http://ftp.evolveo.com/ce/
Importer
Abacus Electric, s.r.o.
Planá 2, 370 01, Czech Republic
Producer / Producer / Manufacturer / Gyártó
Naxya Limited
No. 5, 17/F, Strand 50, 50 Bonham Strand, Sheung Wan,
Hong Kong
Made in China
Copyright © Abacus Electric, s.r.o.
www.evolveo.com
www.facebook.com/EvolveoCZ
All rights reserved.
The appearance and technical specifications of the product are subject to
change without notice.