baseus PPCXM10T 10000mAh 30W Power Bank User Manual

July 31, 2024
Baseus

baseus PPCXM10T 10000mAh 30W Power Bank

Frequently Asked Questions

Q: Can this product be used outside of the EU?

A: While designed for use across EU member states, the product may also be used in other regions, but compliance with local regulations should be verified.

Q: How can I obtain a copy of the EU Declaration of Conformity?

A: The EU Declaration of Conformity can be downloaded from the manufacturer’s website at the provided internet address.

Baseus Magnetic Mini Wireles.s Fast Charge Power BankType-C Edition lOOOOmAh 30W

Before using the product, thoroughly read this manual. Keep them annually for future reference.

Specifications

  • Name: Power Bank
  • Model No.: PPCXM10T
  • Battery: Polymer Lithium Battery
  • Capacity: 5000mAh 7.4V/37Wh
  • Cell: 5000mAh*2pcs
  • Energy Conversion Rate: ≥ 75%
  • Type-C Input: 5V-3A; 9V-2A; 12V- 1.5A
  • Type-C Cable Input: 5V-3A; 9V-2A; 12V-1.5A
  • Type-C Output: 5V-3A; 9V-3A ;12V-2.5A;15V-2A
  • Type-C Cable Output: 5V- 3A; 9V-3A; 12V-2.5A; 15V-2A
  • Wireless Output: 5W/7.5W/10W/15W
  • Type-C +Type-C Cable Output:5V-3A
  • Total Output: 5V=3A
  • Size: 108.7 x 69 × 20mm
  • Net Weight: ~216g

Content

  • Power bank X1
  • User manual X1
  • Warranty card X1

Overview

Description

This product is a mini-sized portable power bank with built-in 30W fast charging cable. The Type-C port is multi-protocol certified and supports two- way fast charging. It has multiple built-in safety protection circuits for overcurrent, overvoltage, short circuit, etc.

Warnings

  1. This is NOT a toy! Please place this product in areas that are not easily accessible by children.
    Do not allow children to operate this product, or accidents may occur.

  2. Please charge this product with a charger approved by the local safety standards in case of danger or damage.

  3. DO NOT apply pressure, and avoid collisions. The battery and circuit may be damaged if this product falls from a great height, experiences intense shocks, or is immersed in liquid; if so, please avoid using this product.

  4. If this product suffers from deformation, leakage, or radical decline in performance, please stop using this product.

  5. Please DO NOT charge any device or recharge this product in places that may affect its heat dissipation, such as pants pockets, enclosed bags, beds, or couches. And ensure this product is not under any cover when operating. When charging other devices for prolonged periods, DO NOT stack any device on top of this product, or it might affect its heat dissipation.

  6. This product CAN NOT be disassembled, applied pressure, pierced, short-circuited, immersed in liquid, disposed of in a fire, or exposed to a high temperature or heat source with a temperature greater than 140°F(60°C).

  7. DO NOT place this product in areas with extremely high temperatures. Such as under direct sunlight or in a vehicle with a very high interior temperature.

  8. This product contains lithium batteries, DO NOT disassemble it! Or danger or battery damage may occur.

Attention

  • Please fully charge this device before using it for the first time.
  • The power banks have conversion efficiency, so the battery capacity of power bank is not equal to the rechargeable capacity.
  • Please choose an appropriate charger for recharging this product and suitable cables when charging other devices.
  • Please ensure some supervision is in progress when recharging this product, DO NOT charge this product without any care.
  • Please remove the cable when done recharging this product or finished charging for any other device to preserve the product integrity.
  • If the indication does not light up after pressing the power button, please recharge this product.
  • Please preserve this product with a battery percentage between 25%-50% for long-term storage. Place this product in a cool and dry environment. To slow down battery aging, avoid storing this product in an empty or full charge for long-term storage.
  • Consumer shall be liable for any personal and property damage resulted from their improper use against the user manual or ignoring the warning, to which our company will not bear any legal liability.

Operating Environment

  • Working temperature: non-tropical areas, 0°C to 30 °C
  • Storage temperature: 0°C to 40 °C

Caution

  1. This product does not contain any user-serviceable parts, and the rechargeable battery is not replaceable.
  2. Putting the battery pack into fire or heating it in an oven, as well as subjecting the battery pack to mechanical squeezing or cutting, may result in explosion.
  3. Placing the battery pack in an extremely high-temperature environment may cause explosion or leakage of flammable liquids or gases.
  4. Subjecting the battery pack to extremely low air pressure may cause explosion or leakage of flammable liquids or gases

Wireless Charging Warnings

  • This product utilizes magnetic and capacitive coupling mechanisms to achieve non-beamforming near-field power transmission from the power source to the load.
  • The device complies with relevant regulations such as the “Interim Provisions on Radio Management for Wireless Charging (Power Transmission) Devices,” as well as laws and regulations concerning product quality, electromagnetic radiation, electrical safety, and national standards.
  • It is not allowed to change the usage scenarios or conditions, expand the operating frequency range, or increase the transmission power (including adding additional power amplifiers) without permission.
  • It is not allowed to cause harmful interference to other legal wireless services and stations.
  • Users cannot request protection against radio interference or radiation interference. If harmful interterence to other legal wireless services and stations occurs, immediate use must be stopped, and it can only be resumed after taking measures to eliminate the harmful interference.
  • Wireless charging devices are prohibited in this area. The use of wireless charging function is not allowed
  • If the use of wireless charging devices is causing interference to broadcast services, it should be immediately discontinued.
  • The use of wireless charging devices in ships, aircraft, and railway locomotives (including high-speed train units) should comply with this regulation and the relevant regulations of the industry authority.

Statement on Toxic and Hazardous Substances in Electronic Information

Products

This form is compiled in accordance with SJ/T 11364.
0: It indicates that the content of the toxic and harmful substance in all homogeneous materials of the component is below the limit specified in GB/T 26572 standard.
X: The content of toxic and harmful substances in at least one homogeneous material of this part exceeds the limit stipulated in GB/T 26572 standard.
The 5-year icon refers to the “valid environment-friendly use period”, not the product quality assurance period. Electronic products contain toxic and harmful substances such as lead, mercury and cadmium. The overdue use of these products may lead to leakage or mutation of these toxic and harmful substances, cause environment pollution or serious damage to people and property. The term of “environment-friendly use period” means that all electronic products shall be used within this validity period. We are free of any responsibility against safety issues caused by using the product beyond its safe service life.

  • This symbol indicates that this product shall not be treated as ‘ household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Follow local rules and never dispose of
  • the product or batteries with regular household waste.

FCC NOTE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Declartion of Conformity :
Shenzhen Baseus Technology Co., Ltd. declares that the product is incompliance with Directive 2014/53/EU. The full text of the EU declaration ofconformity is available at the following internet
address:https://eu.baseus.com/pages/euro-compliance. This product can be used across EU member states

The following importer is the responsible party (for FCC matters only)
Company Name: BASEUS TECHNOLOGY (US) INC
Address: 421 S BROOKHURST ST SUITE 1312
ANAHEIM, CA 92804
Telephone: +6-145412699

Warning Prohibited from disassembling, impacting, squeezing, or putting in fire.
If severe swelling occurs, do not continue to use.
Do not place in high-temperature environment.
Prohibited from use after immersion in water.

Manufacturer: Shenzhen Baseus Technology Co., Ltd.
Add: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen
Executive Standard: GB 4943.1 GB 31241
Hotline: +86-4000-712-711
Website: www.baseus.com
Official After-sales E-mail Address: care@baseus.com

Designed by Baseus
Made in China
PB4477Z-POAO


Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals