Hanwha Vision SBV-140TBW Tilt Mount Instruction Manual
- July 30, 2024
- Hanwha Vision
Table of Contents
Hanwha Vision SBV-140TBW Tilt Mount
Package
Optional Accessory
- Steel Strap:
- SBP-060S (600mm)
- SBP-150S (1500mm)
Product Information
Specifications
- Product: Tilt Mount SBV-140TBW
- Installation: Wall (Pole – Optional Accessory)
- Steel Strap Options: SBP-060S (600mm), SBP-150S (1500mm)
- Steel Strap Part Number: PT01-006135A
- Conduit Size: 3/4 (M25)
Product Usage Instructions
Wall Installation
(Wall)
- Identify a suitable location on the wall for mounting the tilt mount.
- Use appropriate tools to securely attach the mount to the wall following the provided instructions.
- Make sure the tilt mount is level and secure before mounting your device.
Pole Installation (Using Optional Steel Strap)
- If opting for pole installation, ensure you have the optional steel strap SBP-060S or SBP-150S. When using conduit (3/4″)
- Wrap the steel strap around the pole and connect it securely to the tilt mount using the provided hardware.
- Adjust the tilt angle as needed before mounting your device.
FAQ
Q: Can I install the tilt mount on a different surface other than a wall or
pole?
A: The tilt mount is specifically designed for wall or pole installation.
Other surfaces may not provide adequate support for the mount and your device.
Q: What tools are required for installation?
A: Basic tools such as a drill, screwdriver, and a level are recommended
for the installation process. Refer to the user manual for specific tool
requirements.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>