LINDY 38211v2 50m HDMI 4K60 Repeater User Manual

June 3, 2024
LINDY

38211v2 50m HDMI 4K60 Repeater
User Manual
No. 38211v2
lindy.com

Introduction

Thank you for purchasing the 50m HDMI 4K60 Repeater. This product has been designed to provide trouble free, reliable operation. It benefits from both a LINDY 2 year  warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference.
The Lindy 50m HDMI 4K60 Repeater  is an ideal solution for extending high- quality HDMI signals up to distances of 50m. This active repeater allows the connection of two, long length HDMI cables while amplifying the source signal to ensure maximum reliability without degradation.

Package Contents

  • 50m HDMI 4K60 Repeater
  • USB Type A to Micro-B cable, 0.76m (2.49ft)
  • Lindy Manual

Features

  • Extends HDMI Signals up to a maximum of 50m using high quality HDMI cables
  • Supports resolutions up to 3840×2160@60Hz 4:4:4
  • High Dynamic Range support for enhanced contrasts and 10 bit colour performance

Specification

  • HDMI 2.0

  • HDCP 2.2

  • Supports CEC & 3D Signals

  • Maximum bandwidth: 18Gbps

  • Maximum resolution: 3840×2160@60Hz 4:4:4 8bit

  • HDR Support: HDR 10

  • Maximum distance:
    • 3840×2160@60Hz 4:4:4 8bit – 10m (32.81ft) In / 10m (32.81ft) Out, Total: 20m (65.62ft)
    • 3840×2160@30Hz 4:4:4 8bit – 20m (65.62ft) In / 20m (65.62ft) Out, Total: 40m (131.23ft)
    • 1920×1080@60Hz 4:4:4 8bit – 25m (82.02ft) In / 25m (82.02ft) Out, Total: 50m (164.04ft)

  • Maximum power consumption: 1W

  • Operating temperature: 0°C – 70°C (32°F – 158°F)

  • Storage temperature: -10°C – 80°C (14°F – 176°F)

  • Humidity: 5-90% RH (non-condensing)

  • Housing material: PVC

Installation

For installation, please follow the steps below.

  • Connect an HDMI cable from a source device to the “Input” port on the repeater.
  • Connect an HDMI cable from the “Output” port on the repeater to an HDMI display.
  • Power on the source and display device.

Installation is now complete.

Troubleshooting

If there is no display on the screen, please check the following:

  • Ensure all connections between the source, repeater and display are secure. If so, disconnect then re-connect each connection.
  • Some HDMI source devices may not provide enough power for the repeater, in these cases, connect the included USB Type A to Micro-B cable to the repeater and a 5V USB charger.

Recycling Information
WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products
Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to  simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process. Each individual EU member state, as well as the UK, has  implemented the WEEE regulations into national law in slightly different ways. Please follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from your national WEEE recycling agency.

CE/FCC Statement

CE Certification
LINDY declares that this equipment complies with relevant European CE requirements.
UKCA Certification
LINDY declares that this equipment complies with relevant UKCA requirements.
FCC Certification
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide  reasonable protection against harmful interference in a residential installation.
You are cautioned that changes or modification not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Hersteller/Manufacturer (EU):.
LINDY-Elektronik GmbH
Markircher Str. 20
68229 Mannheim
Germany
Email: info@lindy.com , T: +49 (0)621 470050
Manufacturer (UK):
LINDY Electronics Ltd
Sadler Forster Way
Stockton-on-Tees, TS17 9JY
England
sales@lindy.co.uk , T: +44 (0)1642 754000

Tested to comply with
FCC standards.
For home and office use.
No. 38211v2 th4
Edition, August 2022
lindy.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals