Fronius Symo GEN24 Hybrid Inverter User Guide
- July 30, 2024
- Fronius
Table of Contents
Fronius Symo GEN24 Hybrid Inverter
Specifications
- Model: Fronius Symo GEN24
- Power Output: 3.0 – 10.0 kW
- Voltage Range: 160 – 500 V
- Dimensions:
- 3 – 5 kW: 530 x 474 x 165 mm
- 6 – 10 kW: 595 x 529 x 180 mm
Product Usage Instructions
Installation Notes
Ensure the following during installation:
- Check the rating plate for specifications.
- Adhere to safety information provided.
- Mount as per specified conditions.
- Ensure proper mounting at a height between 0m – 4001m.
Commissioning
Follow these steps for commissioning:
- Connect the required AC and DC inputs.
- Set up data communication if necessary.
- Access the control panel for further configuration.
WARNING!
Operating the equipment incorrectly or poor workmanship can cause serious
injury or damage. The inverter may only be installed and commissioned by
trained personnel acting in accordance with the technical regulations. Before
working with the device, en-sure that you have read and understood all the
documents provided (both hard copies enclosed with the product and documents
provided online). Caution! When solar modules are exposed to light, they
supply voltage to the inverter. This document does not describe all of the
possible system configurations. Fronius International GmbH declares that the
radio equipment type Fronius Symo GEN24 is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at
the following internet address: www.fronius.com
Fronius Symo GEN24 8.0 – 10.0 / 8.0 – 10.0 Plus
manuals.fronius.com/html/4204260315/#0_m_0000021045
Operating Instructions
Warning signs explanation
Tools
To note during installation
Mounting conditions
Mounting
Setup with mobile phone
Setup with PC – Ethernet
- Please note that the BAT (RJ45) interface is reserved for future use and not given at the moment.
Fronius Symo GEN24 3.0 – 5.0 / 3.0 – 5.0 Plus
Dimensions (height x width x depth)| 530 x 474 x 165 mm
Max. short-circuit current (ISC PV = ISC max)| 20 A (MPPT1) / 20 A (MPPT2)
Battery voltage range| 160 – 500 V
Fronius Symo GEN24 6.0 – 10.0 / 6.0 – 10.0 Plus / 12.0 SC /
12.0 Plus SC
Dimensions (height x width x depth)| 595 x 529 x 180 mm
Max. short-circuit current (ISC PV = ISC max)| 40 A (MPPT1) / 20 A (MPPT2)
Battery voltage range| 160 – 500 V
Fronius International GmbH
Froniusstraße 1
4643 Pettenbach
Austria
contact@fronius.com
www.fronius.com
Under www.fronius.com/contact you will find
the adresses of all Fronius Sales & Service Partners and locations.
References
- Fronius Symo GEN24 6 - 10 kW / 6 - 10 kW Plus Návod k obsluze
- Fronius Symo GEN24 3 - 5 kW / 3 -5 kW Plus Návod k obsluze
- Fronius Symo GEN24 12 kW SC / 12 kW Plus SC Návod k obsluze
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>